Production of Zinc Coatings by Electro-Spark Deposition
References
- Burkov, A.A., Pyachin, S.A., 2014. Investigation of WC-Co electrospark coatings with various carbon contents, J. Mater. Eng. Performance, 23, 2034-2042.
- Chang-bin, T., Dao-xin, L., Zhan, W., Yang, G., 2011. Electro-spark alloying using graphite electrode on titanium alloy surface for biomedical applications, Appl. Surf. Sci., 257, 6364-6371.
- Depczyński, W., 2001. Wpływ pierwiastków stopowych na proces cynkowania stali, II Konferencja Techniczna „Powłoki Metalowe - Czystsze Technologie”, Łódź - Rogów, 93-97.
- Depczyński, W., 2004. Cynkowanie ogniowe - dłuższa eksploatacja obiektu, Kalejdoskop Budowlany, 10, 70-72.
- Domagala, M., 2013. Simulation of cavitation in jet pumps, Technical Transactions, 110 (5), 51-58.
- Domagala, M., Momeni, H., 2017. CFD simulation of cavitation over water turbine hydrofoils, Technical Transactions, 114 (9), 159-164.
- Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a. Simulation of Particle Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 17-24.
- Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b. Simulation of Cavitation Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 1-6.
- Fabis-Domagala, J., 2013. Application of FMEA matrix for prediction of potential failures in hydraulic cylinder, Technical Transactions, 110 (5), 97-104.
- Fabis-Domagala, J., Domagala, M., 2017. Matrix FMEA analysis with cause-effect diagram for selected fluid power component, Technical Transactions, 114 (10), 141-146.
- Filo, G., 2013. Computer monitoring and control system of a local LNG supply station, Technical Transactions, 110 (5), 105-112.
- Filo, G., 2015. Asynchronous buffer read method in development of DAQ application for supporting research of hydraulic systems, Technical Transactions, 112 (7), 77-82.
- Maszke, A., Dwornicka, R., Ulewicz, R., 2018. Problems in the implementation of the lean concept at a steel works - Case study, MATEC Web of Conf. 183, 01014. DOI: 10.1051/matecconf/201818301014.
- Maass, P., Peissker, P., Ahner, Ch., 2011. Hot-dip galvanization, Wiley, Hoboken, 494.
- Osocha, P., 2018. Calculation of residual life for P91 material based on creep rate and time to rupture, Mater. Res. Proc., 5, 177-182.
- Pawlowska, G., Klimecka-Tatar, D., Radomska, K., 2017. The effect of bio-tolerated binder content on the corrosive behavior of RE-M-B in magnetic composites in sulphite solutions, Ochr. Przed Koroz., 60, 372-375.
- Radek, N., 2009. Determining the operational properties of steel beaters after electro-spark deposition. Eksploatacja i Niezawodność - Maintenance and Reliability, 4, 10-16.
- Radek, N., Sladek, A., Bronček, J., Bilska, I., Szczotok, A., 2014. Electrospark alloying of carbon steel with WC-Co-Al2O3: deposition technique and coating properties, Adv. Mater. Res.-Switz., 874, 101-106.
- Salmaliyan, M., Malek, Ghaeni, F., Ebrahimnia, M., 2017. Effect of electro-spark deposition process parameters on WC-Co coating on H13 steel, Surf. Coat. Tech., 321, 81-89.
- Skrzypczak-Pietraszek, E., Reiss, K., Żmudzki, P. and Pietraszek, J., 2018a. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/ MS. PLoS ONE, 13(8), art. e0202556.
- Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018b. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy, Eng. Life Sci., 18, 287-297.
- Skrzypczak-Pietraszek, E., Urbańska, A., Żmudzki, P. and Pietraszek, J., 2019. Elicitation with methyl jasmonate combined with cultivation in the Plantform™ temporary immersion bioreactor highly increases the accumulation of selected centello-sides and phenolics in Centella asiatica (L.) Urban shoot culture, Eng. Life Sci., 19, 931-943.
- Ulewicz, R., Selejdak, J., Borkowski, S., Jagusiak-Kocik, M., 2013. Process management in the cast iron foundry, Metal 2013, Proc. 22nd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1926-1931.
- Wlodarczyk, R., Dudek, A., Nitkiewicz, Z., 2011. Corrosion analysis of sintered material used for low-temperature fuel cell plates, Arch. Metall. Mater., 56, 181-186.
DOI: https://doi.org/10.2478/czoto-2020-0031 | Journal eISSN: 2657-5450
Language: English
Page range: 253 - 258
Submitted on: Nov 28, 2019
Accepted on: Feb 20, 2020
Published on: Apr 18, 2020
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Related subjects:
© 2020 Norbert Radek, Jacek Pietraszek, Dorota Klimecka-Tatar, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.