The Impact of the Agressive Acid Environment on RC Constructions
References
- Al. Sherrawi, M., Lyashenko, V., Edaan, E., Sotnik, L., 2018. Corrosion as a Source of Destruction in Construction, International Journal of Civil Engineering and Technology, 9, 306-314.
- Abu-Tair, A., Rigden, S., Burley, E., 1996. Testing the Bond Between Repair Materials and Concrete Substrate, ACI Materials Journal, 93(6), 553-558.
- Blikharskyy, Z. Ya., Obukh, Y., 2018. Influence of the Mechanical and Corrosion Defects on the Strength of Thermally Hardened Reinforcement of 35GS Steel, Materials Science, 54.
- Blikharskyy, Z., Selejdak, J., Blikharskyy, Y., Khmil, R., 2019. Corrosion of Reinforce Bars in RC Constructions, System Safety: Human - Technical Facility – Environment, 1, 277-283. DOI: 10.2478/czoto-2019-0036.
- Blikharskyy, Z., Vashkevych, R., Vegera, P., Blikharskyy, Y., 2020. Crack Resistance of RC Beams on the Shear, Lecture Notes in Civil Engineering, 47. DOI: 10.1007/978-3-030-27011-7_3.
- Blikharskyy, Y., Khmil, R., Blikharskyy, Z., 2018. Research of RC Columns Strengthened by Carbon FRP Under Loading, Matec Web of Conferences, 174, 1-8. DOI: 10.1051/matecconf/201817404017.
- Bobalo, T., Blikharskyy, Y., Kopiika, N., Volynets, M., 2020. Serviceability of RC Beams Reinforced with High Strength Rebar’s and Steel Plate, Lecture Notes in Civil Engineering, 47. DOI: 10.1007/978-3-030-27011-7_4.
- Bobalo, T., Blikharskyy, Y., Vashkevich, R., Volynets, M., 2018. Bearing capacity of RC beams reinforced with high strength rebars and steel plate, Matec Web of Conferences, 230, 02003. DOI: 10.1051/matecconf/201823002003.
- Brózda, K., Selejdak, J., Koteš, P., 2017. The Analysis of Beam Reinforced with FRP Bars in Bending, Procedia Engineering, 192, 64-68. DOI: 10.1016/j.proeng.2017.06.011.
- Fadhil, B., Al-Rumaithi, A., Al-Sherrawi, M., 2018. Properties of Reactive Powder Concrete with Different Types of Cement, International Journal of Civil Engineering and Technology, 9, 1313-1321.
- Khmil, R., Tytarenko R., Blikharskyy, Y., Vegera, P., 2018. Development of the procedure for the estimation of reliability of reinforced concrete beams, strengthened by building up the stretched reinforcing bars under load, Eastern-European Journal of Enterprise Technologies, 5/7(95). DOI: 10.15587/1729-4061.2018.142750.
- Krainskyi, P., Blikharskyy, Y., Khmil, R., Vegera, P., 2020. Crack Resistance of RC Columns Strengthened by Jacketing, Lecture Notes in Civil Engineering, 47. DOI: 10.1007/978-3-030-27011-7_25.
- Krainskyi, P., Blikharskyy, Y., Khmil, R., Blikharskyy, Z., 2018. Experimental Study of the Srengthening Effect of Reinforced Concrete Columns Jacketed Under Service Load Level, Matec Web of Conferences, 183, 1-5. DOI: 10.1051/matecconf/201818302008.
- Lipiński, T., 2017. Corrosion of S235JR Steel in NaCl Environment at 3 Degrees C. 26th International Conference on Metallurgy and Materials, Ostrava, Tanger, 660-665.
- Lobodanov, M., Vegera, P., Blikharskyy, Z., 2020. Planning Experiment for Researching Reinforced Concrete Beams with Damages, Lecture Notes in Civil Engineering, 47. DOI: 10.1007/978-3-030-27011-7_31.
- Selejdak, J., Blikharskyy, Y., Khmil, R., Blikharskyy, Z., 2020. Calculation of Reinforced Concrete Columns Strengthened by CFRP. Lecture Notes in Civil Engineering, 47. DOI: 10.1007/978-3-030-27011-7_51.
- Selejdak, J., Khmil R., Blikharskyy, Z., 2018. The Influence of Simultaneous Action of the Aggressive Environment and Loading on Strength of RC Beams, Matec Web of Conference, 183, 1-6. DOI: 10.1051/matecconf/201818302002.
- Tayeh, B., Bakar, B.H., Megat, J., Megat, A., Voo, Y., 2013. Evaluation of Bond Strength between Normal Concrete Substrate and Ultra High Performance Fiber Concrete as a Repair Material, Procedia Engineering, 54, 554-563.
- Vegera, P., Vashkevych, R., Blikharskyy, Z., 2018. Fracture Toughness of RC Beams With Different Shear Span, Matec Web of Conferences, 174, 1-8. DOI: 10.1051/matecconf/201817402021.
DOI: https://doi.org/10.2478/czoto-2020-0027 | Journal eISSN: 2657-5450
Language: English
Page range: 223 - 229
Submitted on: Dec 6, 2019
Accepted on: Feb 6, 2020
Published on: Apr 18, 2020
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Related subjects:
© 2020 Yaroslav Blikharskyy, Roman Khmil, Zinoviy Blikharskyy, Taras Shnal, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.