Comparison of Selected Shading Correction Methods
References
- Dudek, A., 2009,
Surface properties in titanium with hydroxyapatite coating . Opt. Appl., 39, 825-831. - Gądek A., Wojnar L., 2003.
Wpływ sposobu korekcji cienia i doboru metody detekcji na wyniki ilościowej oceny porowatości / Effect of shade correction and detection method on the results of quantitative porosity assessment . Inżynieria Materiałowa, 3, 111-116 [in Polish]. - Gądek, A., Kuciel, S., Wojnar, L., Dziadur, W., 2006.
Application of computer-aided analysis of an image for assessment of reinforced polymers structures . Polimery-W 51, 206-211. - Gądek-Moszczak, A., 2017.
History of stereology . Image Anal. Stereol., 36, 151-152. DOI: 10.5566/ias.1867 - Gądek-Moszczak, A., Matusiewicz, P., 2017.
Polish Stereology – a Historical Review . Image Anal. Stereol., 36, 207-221. DOI: 10.5566/ias.1808 - Gawdzinska, K., Gądek-Moszczak, A., Bryll, K., Irska, I., Paszkiewicz, S., 2018.
Influence of water absorption on chosen strength properties of single-polymer polyester composites . Polimery, 63, 264-269. DOI: 10.14314/polimery.2018.4.2 - Krawczyk, J., Sobczyk, A., Stryczek, J., Walczak, P., 2018.
Tests of New Methods of Manufacturing Elements for Water Hydraulics . Mater. Res. Proc., 5, 200-205. DOI: 10.21741/9781945291814-35 - Likar, B., Maintz, J.B.A., Viergever, M.A., Pernusi F., 2000.
Retrospective shading correction based on entropy minimization . Journal of Microscopy, 197, 285-295. - Lipinski, T., 2010.
The structure and mechanical properties of Al-7%SiMg alloy treated with a homogeneous modifier . Solid State Phenom., 163, pp. 183-186. DOI: 10.4028/www.scientific.net/SSP.163.183 - Lipinski, T., Wach, A., 2014.
Influence of outside furnace treatment on purity medium carbon steel . Metal 2014: 23rd Int. Conf. Metallurgy and Materials. Tanger, Ostrava, 738-743. - Radzyminska-Lenarcik, E., Ulewicz, M., 2014.
The use of 1-alkylimidzoles for selective separation of zinc ions in the transport process across a polymeric inclusion membrane . Physicochem. Probl. Mi. 50, 131-142. DOI: 10.5277/ppmp140112 - Russ, J.C., 1995.
The image processing handbook . CRC Press, Boca Raton. - Szabracki, P., Lipinski, T., 2014.
Influence of sigma phase precipitation on the intergranular corrosion resistance of X2CrNiMoN25-7-4 super duplex stainless steel . Metal 2014: 23rd Int. Conf. Metallurgy and Materials. Tanger, Ostrava, 476-481. - Szczotok, A., Chmiela, B., 2014.
Effect of Heat Treatment on Chemical Segregation in CMSX-4 Nickel-Base Superalloy . J. Mater. Eng. Perform., 23, 2739-2747. DOI: 10.1007/s11665-013-0843-1 - Szczotok, A., Rodak, K., 2012.
Microstructural studies of carbides in MAR-M247 nickel-based superalloy . Conf. Technologies and Properties of Modern Utilised Materials, IOP, vol. 35, art. 012006. DOI: 10.1088/1757-899X/35/1/012006 - Tofil, Sz., Mulczyk, K., Witkowski, G., 2018.
Surface micromachining of titanium alloys with picosecond laser to increase the adhesion force in glued joints . Proc. SPIE, 10974, art. 109740Q, DOI: 10.1117/12.2516646 - Ulewicz, M., Walkowiak, W., Brandt, K., Porwolik-Czomperlik, W., 2003.
Ion flotation of zinc(II) and cadmium(II) in the presence of side-armed diphosphaza-16-crown-6 ethers . Sep. Sci. Technol. 38, 633-645. DOI: 10.1081/SS-120016655 - Ulewicz, M., Sadowska, K., Biernat, J.F., 2007.
Selective transport of Pb(II) across polymer inclusion membrane using imidazole azocrown ethers as carriers . Physicochem. Probl. Miner. Process., 41, 133-143. - Ulewicz, M., Lesinska, U., Bochenska, M., 2010.
Transport of lead across polymer inclusion membrane with p-tert-butylcalix[4]arene derivative . Physicochem. Probl. Miner. Process., 44(1), 245–256. - Ulewicz, M., Radzyminska-Lenarcik, E., 2011.
Transport of metal ions across polymer inclusion membrane with 1-alkylimidazole . Physicochem. Probl. Miner. Process. 46, 119-130. - Weglowski, B., Osocha, P., 2009.
Modelling of creep for Y pipe from ferriticmartensitic P91 steel . Rynek Energii, 6, 140-145. - Witkowski, G., Tofil, Sz., Mulczyk, K., 2018.
Surface micro treatment of INCONEL 718 alloys with a picoseconds laser to increase adhesive strength in glued joints . Proc. SPIE, 10974, art. 109740R, DOI: 10.1117/12.2516663 - Wlodarczyk, R., Dudek, A., Nitkiewicz, Z., 2011.
Corrosion analysis of sintered material used for low-temperature fuel cell plates . Arch. Metall. Mater. 56, 181-186. DOI: 10.2478/v10172-011-0021-0 - Wojnar, L., Kurzydłowski, K.J., Szala, J., 2002.
Praktyka analizy obrazu / Image analysis practice . Polskie Towarzystwo Stereologiczne, Kraków [in Polish].
DOI: https://doi.org/10.2478/czoto-2019-0105 | Journal eISSN: 2657-5450
Language: English
Page range: 819 - 826
Submitted on: Nov 18, 2018
Accepted on: Jan 7, 2019
Published on: Mar 28, 2019
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2019 Aneta Gądek-Moszczak, Leszek Wojnar, Adam Piwowarczyk, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.