Operational Properties of the Cermet Electro-Spark Coatings after Laser Treatment – Technology and Application
References
- Domagala, M., Momein, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018a.
Simulation of Cavitation Erosion in a Hydraulic Valve . Mater. Res. Proc., 5, 1-6. - Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018b,
Simulation of Particle Erosion in a Hydraulic Valve . Mater. Res. Proc., 5, 17-24. - Dudek, A., Wlodarczyk, R., 2010.
Structure and properties of bioceramics layers Used for implant coatings . Solid State Phenom., 165, 31-36. FANAR S.A. – production of cutting tools.http://www.fanar.pl (date 20.11.2018).- Gadek-Moszczak, A., 2017.
History of stereology . Image Anal. Stereol., 36, 151-152. - Klimecka-Tatar, D., Pawlowska, G., Orlicki, R., Zaikov, G.E., 2014.
Corrosion characteristics in alkaline, and ringer solution of Fe68-xCoxZr10Mo5W2B15 metalic glasses . J. Balk. Tribol. Assoc., 20(1), 124-130. - Osocha, P., 2018.
Calculation of residual life for P91 material based on creep rate and time to rupture . Mater. Res. Proc., 5, 177-182. - Pawlowska, G., Klimecka-Tatar, D., Radomska, K., 2017.
The effect of bio-tolerated binder content on the corrosive behavior of RE-M-B in magnetic composites in sulphite solutions . Ochr. Przed Koroz., 60, 372-375. - Pieczonka, T., Kazior, J., Szewczyk-Nykiel, A., Hebda, M., Nykiel, M., 2012.
Effect of atmosphere on sintering of Alumix 431D powder . Powder Metall., 55, 354-360. - Pietraszek, J., Radek, N., Bartkowiak, K., 2013.
Advanced statistical refinement of surface layer’s discretization in the case of electro-spark deposited carbide-ceramic coatings modified by a laser beam . Solid State Phenom., 197, 198-202. - Radek, N., Konstanty, J., 2012.
Cermet ESD coatings modified by laser treatment . Arch. Metall. Mater., 57(3), 665-670. - Radek, N., Pietraszek, J., Antoszewski, B., 2014.
The average friction coefficient of laser textured surfaces of silicon carbide identified by RSM methodology . Adv. Mater. Res.-Switz., 874, 29-34. - Radek, N., Wajs, E., Luchka, M., 2008.
The WC-Co electrospark alloying coatings modified by laser treatment . Powder Metall. Met. Ceram., 3-4, 197-201. - Singh, B. et al., 2017. F
easibility study for the measurement of pi N transition distribution amplitudes at (P)over-barANDA in (P)over-barp -> J/psi pi(0) . Phys. Rev. D. 95, 3, 25 p., 032003. - Skrzypczak-Pietraszek, E., 2016.
High production of flavonoids and phenolic acids for pharmaceutical purposes in Vitex agnus castus L. shoot culture . New Biotechnol., 33, 155. - Skrzypczak-Pietraszek, E., Kwiecien, I., Goldyn, A., Pietraszek, J., 2017.
HPLC-DAD analysis of arbutin produced from hydroquinone in a biotransformation process in Origanum majorana L. shoot culture . Phytochem. Lett., 20, 443-448. - Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018.
Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy . Eng. Life Sci., 18, 287-297. - Sygut, P., Klimecka-Tatar, D., Borkowski, S., 2016.
Theoretical analysis of the influence of longitudinal stress changes on band dimensions during continuous rolling process . Arch. Metall. Mater., 61, 183-188. - Ulewicz, R., 2016.
Quality Management System operation in the woodworking industry . Int. Conf. Path Forward for wood products: a global perspective. Proc. of Sci. Papers, Zagreb, WOODEMA, 51-56. - Ulewicz, R., Selejdak, J., Borkowski, S., Jagusiak-Kocik, M., 2013.
Process management in the cast Iron foundry . Metal 2013: 22nd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1926-1931. - Ulewicz, R., Szataniak, P., Novy, F., 2014.
Fatigue properties of wear resistant martensitic steel . Metal 2014: 23rd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 784-789. - Weglowski, B., Osocha, P., 2009.
Modelling of creep for Y pipe from ferriticmartensitic P91 steel . Rynek Energii, 6, 140-145. - Wlodarczyk, R., Dudek, A., Nitkiewicz, Z., 2011.
Corrosion analysis of sintered material used for low-temperature fuel cell plates . Arch. Metall. Mater., 56, 181-186.
DOI: https://doi.org/10.2478/czoto-2019-0102 | Journal eISSN: 2657-5450
Language: English
Page range: 797 - 804
Submitted on: Nov 9, 2018
Accepted on: Dec 28, 2018
Published on: Mar 28, 2019
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2019 Norbert Radek, Jacek Pietraszek, Janusz Konstanty, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.