Corrosion Properties Of 1.4512 Ferritic And 1.4404 Austenitic Steels For The Automotive Industry
References
- Adamczyk, J., 2004.
Inżyniera materiałów metalowych. część 2 . Wyd. Politechniki Śląskiej, Gliwice (in Polish). - Bala, H., 2002.
Korozja materiałów – teoria i praktyka . Prace Dydaktyczne Wydziału Inżynierii Procesowej, Materiałowej i Fizyki Stosowanej, Seria: Inżynieria Materiałowa, Nr 5, Wyd. Politechniki Częstochowskiej, Częstochowa (in Polish). - Hadzima, B., Liptáková, T., 2008.
Základy elektrochemickej korózie kovov (Fundamentals of electrochemical corrosion of metals) . EDIS - Žilinská univerzita, Žilina (in Slovak). - Han, P.H., Xu, Z.H., Wang, C.P., Li, M.C., Bi, H.Y., 2014.
Condensate corrosion behavior of type 409 stainless steel in simulated automotive muffler environments . International Journal of Elektrochemical Science 9, 3784–3794. - Inoue, Y., Kikuchi, M. 2003.
Present and Future Trends of Stainless Steel for Automotive Exhaust System . Nippon Steel Technical Report 88,www .nssmc.com/en/tech/report/nsc/pdf/n8814.pdf. - Lukaszkowicz, K., 2014.
Coatings for transport industry . Transport Problems, 9, 3, 15-20. - PN EN-ISO 643:2013-06
Steel - Micrographic definition of grain size . - PN-EN 10088-2:2014-12
Corrosion resistant steel - Part 2: Technical conditions for the delivery of thin / thick sheets and stainless steel , general application - Rajadurai, S., Afnas, M., Ananth, S., Surendhar, S., 2014.
Materials for automotive exhaust system. I nternational Journal of Recent Development in Engineering and Technology, 2, 3, 82-89. - Szklarska – Smialowska, Z., 2005.
Pitting and crevice corrosion . NACE International, Houston, Texas. - Uhríčik, M., Sapieta, M., Stankovičová, Z., Palček, P., Oravcová, M., 2016.
The stress detection of stainless steel AISI 304, AISI 316L and AISI 316Ti during three-point bending cyclic loading . Materials Today proceedings 3, 4, on-line, 1189-1194. - Wróbel-Knysak, A., 2012.
Increasing service life of Al-Si protective coatings used in the automotive industry . (PhD thesis, in Polish), Politechnika Częstochowska. - Wróbel-Knysak, A., Radziszewski, L., 2016.
Condition of Al-Si protective coating of automotive exhaust systems after dip&dry corrosion test . In:33rd Interntional Colloqium , May 25-27 2016, Western Tatras – Zuberec, Slovakia, 116-119. - Wróbel, A., Kucharska, B., 2011.
Materiały na elementy samochodowych układów wydechowych – dawniej i dziś . In: Materiały Konferencyjne nr 15, XII Międzynarodowej Konferencji Naukowej, Nowe Technologie i Osiągnięcia w Metalurgii i Inżynierii Materiałowej, Politechnika Częstochowska, 533-537 (in Polish). - Zatkalíková, V., Markovičová, L., Belan, J., Liptáková, T., 2014. Variability of local corrosion attack morphology of AISI 316Ti stainless steel in aggressive chloride environment. Manufacturing Technology, 14, 3, 493-497.
http://www.italinox.sk/ (accessed 12.4. 2018).
DOI: https://doi.org/10.2478/czoto-2019-0095 | Journal eISSN: 2657-5450
Language: English
Page range: 745 - 752
Submitted on: Nov 12, 2018
Accepted on: Dec 21, 2018
Published on: Mar 28, 2019
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2019 Viera Zatkalíková, Lenka Markovičová, Anna Wróbel-Knysak, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.