Filo, G., Lisowski, E., Domagala, M., Fabis-Domagala, J., Momeni, H., 2018. Modelling of pressure pulse generator with the use of a flow control valve and a fuzzy logic controller. MSM 2018: 14th Int. Conf. Mechatronic Systems and Materials, Zakopane, Poland, AIP Conf. Proc., 2029, art. 020015. DOI: 10.1063/1.5066477
Goroshko, A., Royzman, V., Pietraszek, J., 2014. Construction and practical application of hybrid statistically-determined models of multistage mechanical systems. Mechanika, 20, 489-493. DOI: 10.5755/j01.mech.20.5.8221
Kirschbaum, D.M., 2000. Calculated Risk, Good Surprise, Bad Surprise: The Law of Unintended Consequences. Community Risk Management and Insurance, Washington, USA.
Kozien, E., 2017. Identification of stage phase growth in the checklist method using different statistical parameters. 20th International Scientific Conference on Economic and Social Development. Varazdin, Varazdin Development and Entrepreneurship Agency, 538-545.
Kozien, E., Kozien, M., 2017. Interval analysis as a method of measurement of uncertainity in the check-list method applied to identification of stage phase of companies. 26th International Scientific Conference on Economic and Social Development. Varazdin, Varazdin Development and Entrepreneurship Agency, 210-215.
Kozien, E., 2018a. Using the risk-list method for risk assessment in the project. 31st International Scientific Conference on Economic and Social Development. Varazdin, Varazdin Development and Entrepreneurship Agency, 152-158.
Kozien, E., 2018b. Quality of project financed by the European Union structural fund. 12th Int. Conf. “Quality Production Improvement” QPI 2018. MATEC Web of Conferences, 183, art. 04006. DOI: 10.1051/matecconf/201818304006
Kozien, E., Kozien, M., 2018. Using the fuzzy logic description for the ex-ante risk assessment in the project. 35th International Scientific Conference on Economic and Social Development. Varazdin, Varazdin Development and Entrepreneurship Agency, 224-231.
Krawczyk, J., Sobczyk, A., Stryczek, J., Walczak, P., 2018. Tests of New Methods of Manufacturing Elements for Water Hydraulics. Mater. Res. Proc., 5, 200-205. DOI: 10.21741/9781945291814-35
Lisowski, E., Filo, G., 2017. Analysis of a proportional control valve flow coefficient with the usage of a CFD method. Flow Meas. Instrum. 53, 269-278. DOI: 10.1016/j.flowmeasinst.2016.12.009
Maszke, A., Dwornicka, R., Ulewicz, R., 2018, Problems in the implementation of the lean concept at a steel works – Case study. MATEC Web Conf., 183, art. 01014. DOI: 10.1051/matecconf/201818301014
Osocha, P., Duda, P., Weglowski, B., 2004. Determining temperature and stress changes in thick-walled elements of steam lines. Inz. Chem. Procesowa 25, 2249-2256.
Osocha, P., 2018. Calculation of Residual Life for P91 Material Based on Creep Rate and Time to Rupture. Mater. Res. Proc. 5, 177-182. DOI: 10.21741/9781945291814-31
Pietraszek, J., Dwornicka, R., Krawczyk, M., Kołomycki, M., 2017. The non-parametric approach to the quantification of the uncertainty in the design of experiments modelling. UNCECOMP 2017, NTU of Athens, 598-604. DOI: 10.7712/120217.5395.17225
Radzyminska-Lenarcik, E., Ulewicz, M., 2014. The use of 1-alkylimidzoles for selective separation of zinc ions in the transport process across a polymeric inclusion membrane. Physicochem. Probl. Mi. 50, 131-142. DOI: 10.5277/ppmp140112
Radzyminska-Lenarcik, E., Ulewicz, R., Ulewicz, M., 2018. Zinc recovery from model and waste solutions using polymer inclusion membranes (PIMs) with 1-octyl-4-methylimidazole. Desalination and Water Treatment, 102, 211-219. DOI: 10.5004/dwt.2018.21826
Sefton T., Byford S., McDaid D., Hills J., Knapp M., 2002. Making the most of it. Economic evaluation in the social welfare field, Joseph Rowntree Foundation, New York, USA.
Sanders, J.R. (chair), 1994. The program evaluation standards: how to assess evaluation educational programs. Sage Publications, Thousand Oaks, California, USA.
Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy. Eng. Life Sci., 18, 287-297. DOI: 10.1002/elsc.201800003
Ulewicz, M., Lesinska, U., Bochenska, M., 2010. Transport of lead across polymer inclusion membrane with p-tert-butylcalix[4]arene derivative. Physicochem. Probl. Miner. Process., 44(1), 245–256.
Ulewicz, R., Selejdak, J., Borkowski, S., Jagusiak-Kocik, M., 2013. Process management in the cast iron foundry. METAL 2013: 22nd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1926-1931.
Wlodarczyk, R., Dudek, A., Nitkiewicz, Z., 2011. Corrosion analysis of sintered material used for low-temperature fuel cell plates. Arch. Metall. Mater. 56, 181-186. DOI: 10.2478/v10172-011-0021-0