References
- Domagala, M., Momein, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018a, Simulation of Cavitation Erosion in a Hydraulic Valve. Mater. Res. Proc. 5, 1-6.
- Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018b, Simulation of Particle Erosion in a Hydraulic Valve. Mater. Res. Proc. 5, 17-24.
- Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P., Pobedza, J., 2017. The Laser Textured Surfaces of the Silicon Carbide Analyzed with the Bootstrapped Tribology Model. Metal 2017: 26th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1252-1257.
- Fabis-Domagala, J., Filo, G., Momeni, H., Domagala, M., 2018. Instruments of identification of hydraulic components potential failures. MATEC Web Conf., 183 (2018) 03008.
- HydraulicSupermarket.com, How a little mistake cost a hydraulic equipment owner $86,165 a year!. https://www.hydraulicsupermarket.com/the-right-oil.html [date: 08.11.2018]
- ID System, Understanding hydraulic risks and preventing accidents. https://www.idsystem-didactic.com/en/hydraulic-safety/ [date: 08.11.2018]
- Korzekwa, J., Bara, M., Pietraszek, J., Pawlus, P., 2016. Tribological behaviour of Al2O3/inorganic fullerene-like WS2 composite layer sliding against plastic. Int. J. Surf. Sci. Eng., 10, 570-584.
- Kozien, M.S., 2009. Acoustic intensity vector generated by vibrating set of small areas with random amplitudes. J. Theor. App. Mech.-Pol. 47, 411-420.
- Kuscer, D., Korzekwa, J., Kosec, M., Skulski, R., 2007. A- and B-compensated PLZT x/90/10: Sintering and microstructural analysis. J. Eur. Ceram. Soc. 27, 4499-4507.
- Lisowski, E., Filo, G., 2017. Analysis of a proportional control valve flow coefficient with the usage of a CFD method. Flow Meas Instrum 53, 269-278.
- Maszke, A., Dwornicka, R., Ulewicz, R., 2018. Problems in the implementation of the lean concept at a steel works – Case study. MATEC Web Conf., 183, art. 01014.
- Pacana, A., Ulewicz, R., 2017. Research of Determinants Motiving to Implement the Environmental Management System. Pol. J. Manag. Stud. 16, 165-174.
- Phadke, M.S., 1989. Quality Engineering using Robust Design. Prentice Hall, Englewood Cliffs, USA.
- Pietraszek, J., Szczotok, A., Kolomycki, M., Radek, N., Kozien, E., 2017. Non-parametric assessment of the uncertainty in the analysis of the airfoil blade traces. Metal 2017: 26th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1412-1418.
- Singh, B. et al., 2016. Study of doubly strange systems using stored antiprotons. Nucl. Phys. A 954, 323-340.
- Singh, B. et al., 2017. Feasibility study for the measurement of pi N transition distribution amplitudes at (P)over-barANDA in (P)over-barp -> J/psi pi(0). Phys. Rev. D. 95, 3, 25 p., 032003.
- Skrzypczak, L., Skrzypczak-Pietraszek, E., Lamerzarawska, E., Hojden, B., 1994. Micropropagation of Oenothera-Biennis L and an Assay of Fatty-Acids. Acta Soc. Bot. Pol. 63, 173-177.
- Skrzypczak-Pietraszek, E., Pietraszek, J., 2009. Phenolic acids in in vitro cultures of Exacum affine Balf. f. Acta Biol. Cracov. Bot., 51, 62-62.
- Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018a. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy. Eng. Life Sci., 18, 287-297.
- Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018b. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE 13, e0202556.
- Sobczyk, A., 2011. Improvement of Hydraulic System Efficiency by Means of Energy Recuperation. Wyd. Politechniki Krakowskiej, Kraków, Poland.
- Styrylska, T., Pietraszek, J., 1992. Numerical Modeling of Non-Steady-State Temperature-Fields with Supplementary Data. Z. Angew. Math. Mech. 72, T537-T539.
- Ulewicz, R., 2016. Quality Management System operation in the woodworking industry. Int. Conf. Path Forward for wood products: a global perspective. Proc. of Sci. Papers, Zagreb, WOODEMA 51-56.
- Ulewicz, R., Selejdak, J., Borkowski, S., Jagusiak-Kocik, M., 2013. Process management in the cast Iron foundry. Metal 2013: 22nd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1926-1931.