Influence of the Environment on the Operational Safety of a Fluidized Bed Boiler
By:
References
- Demirbas, M.F., Balat, M., Balat, H., 2009.
Potential contribution of biomass to the sustainable energy development . Energy Conv. Manag., 50(7), 1746-1760. DOI: 10.1016/j.enconman.2009.03.013 - Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018b,
Simulation of Particle Erosion in a Hydraulic Valve . Mater. Res. Proc. 5, 17-24. DOI: 10.21741/9781945291814-4 - Guidoni, G., Dudek, A., Patsias, S., Anglada, M., 2005.
Fracture behaviour of thermal barrier coatings after high temperature exposure in air . Mat. Sci. Eng. A-Struct., 397, 209-214. - Korzekwa, J., Gadek-Moszczak, A., Zubko, M., 2018.
Influence of the Size of Nanoparticles on the Microstructure of Oxide Coatings . Mater. Sci. 53, 709-716. DOI: 10.1007/s11003-018-0127-x - Kozien, E., Kozien, M.S., 2017.
Interval analysis as a method of measurement of uncertainity in the check-list method applied to identification of stage phase of companies . 26th Int. Sci. Conf. Economic and Social Development – Building Resilient Society: Economic and Social Development. Varazdin Development & Entrepreneurship Agency, Varazdin, Croatia, 210-215. - Leckner, B., Szentannai, P., Winter, F., 2011.
Scale-up of fluidized-bed combustion-a review . Fuel, 90(10), 2951-2964. DOI: 10.1016/j.fuel.2011.04.038 - Maszke, A., Dwornicka, R., Ulewicz, R., 2018,
Problems in the implementation of the lean concept at a steel works – Case study . MATEC Web Conf., 183, art. 01014. DOI: 10.1051/matecconf/201818301014 - Mazur, M., Kucharikova, L., Tillova, E., Chalupova, M., 2018.
A change of mechanical properties of the self-hardening UNIFONT 90 due to temperature . Mater. Res. Proc., 5, 136-141. DOI: 10.21741/9781945291814-24 - Mazur, M., Mikova, K., 2016.
Impact resistance of high strength steels . Mater. Today-Proc. 3, 1060-1063. DOI: 10.1016/j.matpr.2016.03.048 - Nowakowska-Grunt, J., Mazur, M., 2015.
Safety management in logistic processes of the metallurgical industry . METAL 2015: 24th Int. Conf. Metallurgy And Materials, Ostrava, Tanger, 2020-2025. - Nowakowska-Grunt, J., Mazur, M., 2016.
Effectiveness of logistics processes of SMES in the metal industry . METAL 2016: 25th Int. Conf. Metallurgy And Materials, Ostrava, Tanger, 1956-1961. - Osocha, P., Duda, P., Weglowski, B., 2004.
Determining temperature and stress changes in thick-walled elements of steam lines . Inz. Chem. Procesowa 25, 2249-2256. - Osocha, P., 2018.
Calculation of Residual Life for P91 Material Based on Creep Rate and Time to Rupture . Mater. Res. Proc. 5, 177-182. DOI: 10.21741/9781945291814-31 - Pietraszek, J., Dwornicka, R., Krawczyk, M., Kołomycki, M., 2017.
The non-parametric approach to the quantification of the uncertainty in the design of experiments modelling . UNCECOMP 2017, NTU of Athens, 598-604. DOI: 10.7712/120217.5395.17225 - Pliszka, I., Radek, N., Gadek-Moszczak, A., Fabian, P., Paraska, O., 2018.
Surface improvement by WC-Cu electro-spark coatings with laser modification . Mater. Res. Proc. 5, 237-242. DOI: 10.21741/9781945291814-42 - Pobedza, J., Sobczyk, A., 2013.
Modern Coating Used in High Pressure Water Hydraulic Components . Key Engineering Materials, 542, 143-155. DOI: 10.4028/www .scientific.net/KEM.542.143 - Radek, N., Bartkowiak, K., 2011.
Laser Treatment of Cu-Mo Electro-Spark Deposited Coatings . Physcs. Proc., 12, 499-505. DOI: 10.1016/j.phpro.2011.03.061 - Radek, N., Szczotok, A., Gadek-Moszczak, A., Dwornicka, R., Broncek, J., Pietraszek, J., 2018a.
The impact of laser processing parameters on the properties of electro-spark deposited coatings . Arch. Metall. Mater., 63, 809-816. DOI: 10.24425/122407 - Radek, N., Pietraszek, J., Szczotok, A., 2018b.
Microstructure and tribological properties of esd coatings after laser processing . Mater. Res. Proc. 5, 206-209. DOI: 10.21741/9781945291814-36 - Scendo, M., Trela, J., Radek, N., 2014.
Influence of laser power on the corrosive resistance of WC-Cu coating . Surf. Coat. Tech., 259, 401-407. DOI: 10.1016/j.surfcoat.2014.10.062 - Shrestha, S., Ali, B.S., Binti Hamid, M.D., 2016.
Cold flow model of dual fluidized bed: A review . Renew. Sust. Energ. Rev., 53, 1529-1548. DOI: 10.1016/j.rser.2015.09.034 - Szabracki, P., Lipinski, T., 2014a.
Influence of sigma phase precipitation on the intergranular corrosion resistance of X2CrNiMoN25-7-4 super duplex stainless steel . Metal 2014: 23rd Int. Conf. Metallurgy and Materials. Tanger, Ostrava, 476-481. - Szabracki, P., Lipinski, T., 2014b.
Effect of Aging on the Microstructure and the Intergranular Corrosion Resistance of X2CrNiMoN25-7-4 Duplex Stainless Steel . Solid State Phenom., 203-204, 59-62. DOI: 10.4028/www .scientific.net/SSP.203-204.59 - Szczotok, A., Rodak, K., 2012.
Microstructural studies of carbides in MAR-M247 nickel-based superalloy . Conf. Technologies and Properties of Modern Utilised Materials, IOP, vol. 35, art. 012006. DOI: 10.1088/1757-899X/35/1/012006 - Szczotok, A., Chmiela, B., 2014.
Effect of Heat Treatment on Chemical Segregation in CMSX-4 Nickel-Base Superalloy . J. Mater. Eng. Perform., 23, 2739-2747. DOI: 10.1007/s11665-013-0843-1 - Weglowski, B., Osocha, P., 2009.
Modelling of creep for Y pipe from ferriticmartensitic P91 steel . Rynek Energii, 6, 140-145. - Wlodarczyk, R., Dudek, A., Nitkiewicz, Z., 2011.
Corrosion analysis of sintered material used for low-temperature fuel cell plates . Arch. Metall. Mater. 56, 181-186. DOI: 10.2478/v10172-011-0021-0 - Ud Din, Z., Zainal, Z.A., 2016.
Biomass integrated gasification-SOFC systems: Technology overview . Renew. Sust. Energ. Rev., 53, 1356-1376. DOI: 10.1016/j.rser.2015.09.013 - Yu, L.-J., Cao, G.-Y., Zhu, X.-J., Jiang, A.-Z., Tian, Z.-P., 2003.
Study on an environmental-friendly and high-efficient fuel cell energy conversion system . J. Environ. Sci., 15(1), 97-101.
DOI: https://doi.org/10.2478/czoto-2019-0086 | Journal eISSN: 2657-5450
Language: English
Page range: 678 - 683
Submitted on: Nov 27, 2018
Accepted on: Jan 14, 2019
Published on: Mar 28, 2019
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2019 Agata Dudek, Rafał Kobyłecki, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.