Analysis of the Influence of the Heat-Absorbing Surface of an Air-Cooled Solar Collector on its Thermal and Mechanical Properties
References
- Aoues, K., Noureddine, M., Zellouf, M., Benchabane, A., 2011, Thermal performance improvement of solar air flat plate collector: A theoretical analysis and an experimental study in Biskra, Algeria. Int. J. Ambient Energy, 32(2), 95-102.
- Bochenek, D., Niemiec, P., Korzekwa, J., Durtka, B., Stoklosa, Z., 2018, Microstructure and Properties of the Ferroelectric-Ferromagnetic PLZT-Ferrite Composites. Symmetry-Basel, 10 (3), art.59.
- Butuzov, V., 2013, Air solar collectors. Plumbing, heating, air conditioning, 7, 1-5, (Russian).
- Domagala, M., Momein, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018a, Simulation of Cavitation Erosion in a Hydraulic Valve. Mater. Res. Proc. 5, 1-6.
- Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018b, Simulation of Particle Erosion in a Hydraulic Valve. Mater. Res. Proc. 5, 17-24. Dudek, A., 2009, Surface properties in titanium with hydroxyapatite coating. Opt. Appl., 39, 825-831.
- Dudek, A., 2011, Investigations of Microstructure and Properties in Bioceramic Coatings Used in Medicine. Arch. Metall. Mater., 56, 135-140.
- Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P., Pobedza, J., 2017, The Laser Textured Surfaces of the Silicon Carbide Analyzed with the Bootstrapped Tribology Model. Metal 2017: 26th Int. Conf. Metallurgy and Materials, Tanger, 1252-1257.
- Fajst, V., 2008, The basic provisions of designing of passive houses / trans. from German with additions; (Ed.) Elokhova A., Association of Construction Universities, 144. ISBN: 978-5-93093-619-3 (Russian).
- Gadek-Moszczak, A., Matusiewicz, P., 2017. Polish Stereology – a Historical Review. Image Anal. Stereol., 36, 207-221.
- Kim, M.Ch., 2001, The Oncet of Natural Convection and Heat Transfer Correlation in Horizontal Fluid Layer Heated Uniformly from Below. KSME International Journal, 15(10), 1451–1460.
- Maszke, A., Dwornicka, R., Ulewicz, R., 2018, Problems in the implementation of the lean concept at a steel works – Case study. MATEC Web Conf., 183, art. 01014. Mendaza, J. M., 2014, Solar Collectors for Air Heating Profitability Analysis. University of Gavle, 77 http://www.diva-portal.org/smash/get/diva2:725442/FULLTEXT01.pdf
- Misak, J., Vozniak, O., Datsko, O., Shapoval, S., 2014. Solar power engineering: theory and practice: monograph. Lviv: Lviv Polytechnic Publishing House, 340. ISBN: 978-617-607-597-4 (Ukrainian)
- Patent No. 1346913 USSR. Solar thermal collector. Dobrundashvili Z. №39, 1987..
- Patent No. 68773 UA. Thermosyphon solar collector, Zhelyh V., Lesyk Ch. №7, 2012.
- Pietraszek, J., Dwornicka, R., Krawczyk, M., Kołomycki, M., 2017a. The non-parametric approach to the quantification of the uncertainty in the design of experiments modelling. UNCECOMP 2017, NTU of Athens, 598-604.
- Pietraszek, J., Gadek-Moszczak, A., Torunski, T., 2014. Modeling of errors counting system for PCB soldered in the wave soldering technology. Adv. Mater. Res.-Switz., 874, 139-143.
- Pietraszek, J., Szczotok, A., Kolomycki, M., Radek, N., Kozien, E., 2017b. Non-parametric assessment of the uncertainty in the analysis of the airfoil blade traces. Metal 2017: 26th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1412-1418.
- Radek, N., Szczotok, A., Gadek-Moszczak, A., Dwornicka, R., Broncek, J., Pietraszek, J., 2018. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Arch. Metall. Mater., 63, 809-816.
- Razak, A., Majid, Z., Azmi, W., Azmi, W., Ruslan, M., Choobchian, Sh., Najafi, G., Sopian, K., 2016, Review on matrix thermal absorber designs for solar air collector. Renewable and Sustainable Energy Reviews, 64, 682-693.
- Scendo, M., Trela, J., Radek, N., 2014. Influence of laser power on the corrosive resistance of WC-Cu coating. Surf. Coat. Tech., 259, 401-407.
- Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy. Eng. Life Sci., 18, 287-297.
- Tiziani, A., Molinari, A., Kazior, J., Straffelini, G., 1990. Effect of vacuum sintering on the mechanical-properties of copper-alloyed stainless-steel. Powder Metall. Int., 22, 17-19.
- Usachev, A., 2015, Analysis of the dynamics of the world industry of solar energy. Analysis of the dynamics of the world industry of solar energy. Internet Journal Naukovodenie, 7(4), 1-10, (Russian).
- Weiss, W., Mauthner, F., Solar heat worldwide. Marcets and contribution to the Energy Supply 2010. Edition 2012 / AEE – Institute for Sustainable Tachnologies, Gleisdorf, Austria: 62.
- Zhelykh, V., Kozak, Ch., Furdas, Y., Spodyniuk, N., Dzeryn, O., 2014 Energy saving technologies in production complexes for agricultural purpose. Journal of Lviv Politechnic National University. Theory and practice of building, 781, 230–233.
- Zhelykh, V., Shapoval, S., Venhryn, I., 2017, The potential of radiant energy and its use for low-temperature solar collectors. Journal of Lviv Politechnic National University. Theory and practice of building, 17, 80-83.
- Zhelykh, V., Kozak, Ch., Savchenko, O., 2016, Using of Thermosiphon Solar Collector in an air Heating System of Passive House. Pollack Periodica, 11(2), 125-133. http://real.mtak.hu/52294/1/606.2016.11.2.11.pdf
- Zorawski, W., Chatys, R., Radek, N., Borowiecka-Jamrozek, J., 2008. Plasma-sprayed composite coatings with reduced friction coefficient. Surf. Coat. Tech., 202, 4578-4582.
DOI: https://doi.org/10.2478/czoto-2019-0062 | Journal eISSN: 2657-5450
Language: English
Page range: 481 - 489
Submitted on: Nov 21, 2018
Accepted on: Jan 5, 2019
Published on: Mar 28, 2019
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Related subjects:
© 2019 Vasyl Zhelykh, Malgorzata Ulewicz, Krystyna Kozak, Olena Savchenko, Mariana Kasynets, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.