References
- Ali, S. H., 2014. Social and environmental impact of the rare earth industries. Resources, 3(1), 123-134.
- Balomenos, E., et al., 2017. The EURARE project: Development of a sustainable exploitation scheme for Europe’s Rare Earth Ore deposits. Johnson Matthey Technology Review, 61(2), 142-153.
- Baussan, E. et al., 2014. Neutrino super beam based on a superconducting proton linac. Phys. Rev. Spec. Top.-Accel. Beams, 17, art. 031001.
- Binnemans, K., et al., 2013. Recycling of rare earths: a critical review. Journal of Cleaner Production, 51, 1-22.
- Borra, C. R., et al.,2016. Selective recovery of rare earths from bauxite residue by combination of sulfation, roasting and leaching. Minerals Engineering, 92, 151-159.
- Cordier, D. J., Hedrick, J. B., 2012. Rare earths. US Geological Survey, Mineral Commodity Summaries.
- Dai, A. X., et al., 2016. Recycling of neodymium and dysprosium from permanent magnets. Penn Engineering.
- Deflorian, F., Ciaghi, L., Kazior, J., 1992. Electrochemical Characterization of Vacuum Sintered Copper Alloyed Austenitic Stainless-Steel. Werkst. Korros., 43, 447-452.
- Domagala, M., Momein, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018a. Simulation of Cavitation Erosion in a Hydraulic Valve. Mater. Res. Proc. 5, 1-6.
- Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018b. Simulation of Particle Erosion in a Hydraulic Valve. Mater. Res. Proc. 5, 17-24.
- Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P., Pobedza, J., 2017. The Laser Textured Surfaces of the Silicon Carbide Analyzed with the Bootstrapped Tribology Model. Metal 2017: 26th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1252-1257.
- Ferdek, U., Kozien, M.S., 2013. Simulation of application of FGM piezoelectric actuators for active reduction of beam vibrations. Acta Phys. Pol. A, 123, 1044-1047.
- Filo, G., Fabis-Domagala, J., Domagala, M., Lisowski, E., Momeni, H., 2018a. The idea of fuzzy logic usage in a sheet-based FMEA analysis of mechanical systems. MATEC Web Conf., 183,art. 03009.
- Filo, G., Lisowski, E., Domagala, M., Fabis-Domagala, J., Momeni, H., 2018b. Modelling of pressure pulse generator with the use of a flow control valve and a fuzzy logic controller. MSM 2018: 14th Int. Conf. Mechatronic Systems and Materials, Zakopane, Poland, AIP Conf. Proc., 2029, art. 020015.
- Gadek-Moszczak, A., 2017. History of Stereology. Image Anal.Stereol., 36, 151-152.
- Gadek-Moszczak, A., Matusiewicz, P., 2017. Polish Stereology – a Historical Review. Image Anal. Stereol., 36, 207-221.
- Gadek-Moszczak, A., Pietraszek, J., Jasiewicz, B., Sikorska, S., Wojnar, L., 2015. The bootstrap approach to the comparison of two methods applied to the evaluation of the growth index in the analysis of the digital x-ray image of a bone regenerate. New Trends in Comput. Collective Intelligence, 572, 127-136.
- Goroshko, A., Royzman, V., 2015. Statistical methods for providing the stability of the solutions of inverse problems and their application to decrease rotor vibroactivity. Journal of Machinery Manufacture and Reliability, 44, 232-238.
- Haque, N., et al., 2014. Rare earth elements: Overview of mining, mineralogy, uses, sustainability and environmental impact. Resources, 3(4), 614-635.
- Kalantzakos, S., 2017. China and the Geopolitics of Rare Earths. Oxford University Press.
- Korzekwa, J., Bara, M., Pietraszek, J., Pawlus, P., 2016. Tribological behaviour of Al2O3/inorganic fullerene-like WS2 composite layer sliding against plastic. Int. J. Surf. Sci. Eng., 10, 570-584.
- Korzekwa, J., Gadek-Moszczak, A., Zubko, M., 2018. Influence of the size of nanoparticles on the microstructure of oxide coatings. Mater. Sci. 53, 709-716.
- Korzekwa, J., Tenne, R., Skoneczny, W., Dercz, G., 2013. Two-step method for preparation of Al2O3/IF-WS2 nanoparticles composite coating. Phys. Status Solidi A 210, 2292-2297.
- Kumari, A., et al., 2015. Process development to recover rare earth metals from monazite mineral: A1 review, Minerals Engineering, 79, 102-115.
- Liyananadirah M. S., et al. 2017. A Review of Rare Earth Mineral Processing Technology, Chemical Engineering Research Bulletin 19 (2017) 20-35.
- Mubashir, M., 2018. Rare Earth Elements- A Review, Journal of Ecology & Natural Resources, DOI: 10.23880/JENR-16000128.
- Niciejewska, M., Klimecka-Tatar, D., 2018. Health problems among employees in small enterprises as a result of improper OHS management. 12th International Conference Quality Production Improvement, QPI 2018; Zaborze near Myszkow; Poland; 18 June 2018 through 20 June 2018; Code 139366 DOI: https://doi.org/10.1051/matecconf/201818301012
- Nowakowska-Grunt, J., Mazur, M., 2015. Safety management in logistic processes of the metallurgical industry. METAL 2015: 24th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 2020-2025.
- Nowakowska-Grunt, J., Mazur, M., 2016. Effectiveness of logistics processes of SMES in the metal industry. METAL 2016: 25thInt. Conf. Metallurgy and Materials, Ostrava, Tanger, 1956-1961.
- Ohno, K., Esfarjani, K., Kawazoe, Y., 2018. Computational Materials Science. From Ab Initio to Monte Carlo Methods. Second Edition. Springer-Verlag GmbH, Heidelberg, Germany.
- Pacana, A., Ulewicz, R., 2017. Research of determinants motiving to implement the environmental management system. Polish Journal of Management Studies, 16 (1), 165-174. DOI: 10.17512/pjms.2017.16.1.14
- Pagano, G.,2015. Rare earth elements in human and animal health: state of art and research priorities. Environmental Research, 142, 215-220.
- Pietraszek, J., Gadek-Moszczak, A., 2013. The smooth bootstrap approach to the distribution of a shape in the ferritic stainless steel AISI 434L powders. Solid State Phenom., 197, 162-167.
- Pietraszek, J., Goroshko, A., 2014. The heuristic approach to the selection of experimental design, model and valid pre-processing transformation of DOE outcome. Adv. Mat. Res.-Switz., 874, 145-149.
- Pietraszek, J., Szczotok, A., Radek, N., 2017. The fixed-effects analysis of the relation between SDAS and carbides for the airfoil blade traces. Arch. Metall. Mater., 62, 235-239.
- Protection, R., 2011. NORM Residue Management in the Production of Rare Earths from Thorium Containing Minerals. Safety Reports Series No. 68. International Atomic Energy Agency: Vienna.
- Radek, N., Bartkowiak, K., 2011. Laser Treatment of Cu-Mo electro-spark deposited coatings. Physcs. Proc., 12, 499-505.
- Radek, N., Pietraszek, J., Szczotok, A., 2017. Technology and application of electro-spark deposited coatings. Metal 2017: 26th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1432-1437.
- Royen, H.,Fortkamp, U., 2016. Rare Earth Elements-Purification, Separation and Recycling, IVL Swedish Environmental Research Institute.
- Scendo, M., Trela, J., Radek, N., 2014. Influence of laser power on the corrosive resistance of WC-Cu coating. Surf. Coat. Tech., 259, 401-407.
- Schluep, M., & Programme des Nations Unies pour l'environnement, 2009. Recycling, from E-waste to resources. UNEP DTIE; StEP Initiative.
- Schüler, D., et al., 2011. Study on rare earths and their recycling,Öko-Institut eV Darmstadt.
- Shao, J., Tu, D., 1995. The jackknife and bootstrap. Springer Science+Business Media, New York.
- Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittismelissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE 13, art. e0202556.
- Weber, R. J., Reisman, D. J., 2012. Rare earth elements: A review of production, processing, recycling, and associated environmental issues. US EPA Region.
- Yaanant, N., et al.,2017. Study on Developing Safety Infrastructure for Mineral Processing Waste (NORM Waste) and Contamination Monitoring at the TINT Rare Earth Research & Development Center, Khlong 5, Pathumthani, Thailand. Journal of Physics: Conference Series (Vol. 860, No. 1, p. 012044). IOP Publishing.
- Zepf, V., 2013. Rare Earth Elements: What and where they are.Springer, Berlin, Heidelberg.
- Zhu, Z., et al., 2015. Separation of uranium and thorium from rare earths for rare earth production–A review. Minerals Engineering, 77, 185-196.
- Zorawski, W., Chatys, R., Radek, N., Borowiecka-Jamrozek, J., 2008. Plasma-sprayed composite coatings with reduced friction coefficient. Surf. Coat. Tech., 202, 4578-4582.