References
- Bara, M., Kmita, T., Korzekwa, J., 2016. Microstructure and properties of composite coatings obtained on aluminium alloys. Arch. Metall. Mater., 61, 1107-1112. DOI: 10.1515/amm-2016-023810.1515/amm-2016-0238
- Beune A., Kuerten J.G.M., van Heumen M.P.C., 2012. CFD analysis with fluid–structure interaction of opening high-pressure safety valves, Computers & Fluids, 64, 108-116. DOI: 10.1016/j.compfluid.2012.05.01010.1016/j.compfluid.2012.05.010
- Domagala M., 2008. CFD analysis of pilot operated relief valve, Technical Transactions. Mechanics, 3-M, 23-29
- Domagala M., 2015. Modelling of direct acting relief valve using CFD-FSI simulation, Technical Transactions. Mechanics, 2-M, 43-48
- Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a. Simulation of Cavitation Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 1-6. DOI: 10.21741/9781945291814-110.21741/9781945291814-1
- Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b. Simulation of Particle Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 17-24. DOI: 10.21741/9781945291814-410.21741/9781945291814-4
- Ferdek, U.; Kozien, M. S. 2013. Simulation of Application of FGM Piezoelectric Actuators for Active Reduction of Beam Vibrations. Acta Physica Polonica A, 123, 1044-1047. DOI: 10.12693/APhysPolA.123.104410.12693/APhysPolA.123.1044
- Gadek-Moszczak, A., Radek, N., Wronski, S., Tarasiuk, J., 2014. Application the 3D image analysis techniques for assessment the quality of material surface layer before and after laser treatment. Adv. Mat. Res. Switz., 874, 133-138. DOI: 10.4028/www.scientific.net/AMR.874.13310.4028/www.scientific.net/AMR.874.133
- Gawlik, J., Kielbus, A., Karpisz, D., 2015. Application of an integrated database system for processing difficult material. Solid State Phenomena, 223, 35-45. DOI: 10.4028/www.scientific.net/SSP.223.3510.4028/www.scientific.net/SSP.223.35
- Karpisz, D., Kielbus, A., 2018. Selected problems of designing modern industrial databases. MATEC Web Conf., 183, art. 01017. DOI: 10.1051/matecconf/20181830101710.1051/matecconf/201818301017
- Kielbus, A., Karpisz, D., 2019. Risk management as a process security tool. System Safety: Human-Technical Facility-Environment, 1, 234-239. DOI: 10.2478/czoto-2019-003010.2478/czoto-2019-0030
- Kozien, E., Kozien, M.S., 2017. Interval analysis as a method of measurement of uncertainity in the check-list method applied to identification of stage phase of companies. 26th Int. Scientific Conf. Economic and Social Development. Zagreb, Varazdin, 210-215.
- Krawczyk, J., Sobczyk, A., 2018. Tests of New Methods of Manufacturing Elements for Water Hydraulics. Materials Research Proceedings, 5, 200-205. DOI: 10.21741/9781945291814-3510.21741/9781945291814-35
- Lipinski, T., Wach, A., 2014. Influence of outside furnace treatment on purity medium carbon steel. Metal 2014: 23rd Int. Conf. Metallurgy And Materials, Ostrava, Tanger, 738-743.
- Lisowski E., Filo G., Rajda J., 2015. Pressure compensation using flow forces in a multi-section proportional directional control valve, Energy Conv. Manag., 103, 1052-1064. DOI: 10.1016/j.enconman.2015.07.03810.1016/j.enconman.2015.07.038
- Lisowski E., Filo G., Rajda J., 2018. Analysis of flow forces in the initial phase of throttle gap opening in a proportional control valve, Flow Meas. Instrum., 59, 157-167. DOI: 10.1016/j.flowmeasinst.2017.12.01110.1016/j.flowmeasinst.2017.12.011
- Lisowski E., Filo G., Rajda J., 2016. CFD analysis of the characteristics of a proportional flow control valve with an innovative opening shape, Energy Conv. Manag., 123, 15-28. DOI: 10.1016/j.enconman.2016.06.02510.1016/j.enconman.2016.06.025
- Opydo, M., Kobylecki, R., Dudek, A., Bis, Z. 2016. The effect of biomass co-combustion in a CFB boiler on solids accumulation on surfaces of P91 steel tube samples. Biomass & Bioenergy, 85, 61-68. DOI: 10.1016/j.biombioe.2015.12.01110.1016/j.biombioe.2015.12.011
- Pietraszek, J., Kolomycki, M., Szczotok, A., Dwornicka, R., 2016. The fuzzy approach to assessment of ANOVA results. ICCCI 2016: Conf. on Comp. Collective Intell. Springer, 260-268. DOI: 10.1007/978-3-319-45243-2_2410.1007/978-3-319-45243-2_24
- Pobedza, J., Sobczyk, A., 2013. Modern Coating Used in High Pressure Water Hydraulic Components. Key Engineering Materials, 542, 143-155. DOI: 10.4028/www.scientific.net/KEM.542.14310.4028/www.scientific.net/KEM.542.143
- Radek, N., Szczotok, A., Gadek-Moszczak, A., Dwornicka, R., Broncek, J., Pietraszek, J., 2018. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Arch. Metall. Mater., 63, 809-816. DOI: 10.24425/12240710.24425/122407
- Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE 2018, 13, art. e0202556. DOI: 10.1371/journal.pone.0202556
- Szczotok, A., Radek, N., Dwornicka, R., 2018. Effect of the induction hardening on microstructures of the selected steels. METAL 2018: 27th Int. Conf. Metallurgy and Materials. Ostrava, Tanger, 1264-1269.