Numerical Simulation of Fluid Flow inside the Flow Control Valve

Mariusz Domagała; Hassan Momeni; Joanna Fabis-Domagała; Mariusz Krawczyk; Grzegorz Filo; Saeed Bikass

doi:10.2478/cqpi-2019-0053

Abstract

Hydraulic valves are widely used in many branches and they are still developed and improved. Due to the problem with verification of flow phenomena which appears during valves operation numerical simulations methods are tools which allows to improved valves design. This paper presents numerical simulation of fluid flow inside flow control valve.

References

Bara, M., Kmita, T., Korzekwa, J., 2016. Microstructure and properties of composite coatings obtained on aluminium alloys. Arch. Metall. Mater., 61, 1107-1112. DOI: 10.1515/amm-2016-023810.1515/amm-2016-0238
Open DOI Search in Google Scholar Back to article
Beune A., Kuerten J.G.M., van Heumen M.P.C., 2012. CFD analysis with fluid–structure interaction of opening high-pressure safety valves, Computers & Fluids, 64, 108-116. DOI: 10.1016/j.compfluid.2012.05.01010.1016/j.compfluid.2012.05.010
Open DOI Search in Google Scholar Back to article
Domagala M., 2008. CFD analysis of pilot operated relief valve, Technical Transactions. Mechanics, 3-M, 23-29
Search in Google Scholar Back to article
Domagala M., 2015. Modelling of direct acting relief valve using CFD-FSI simulation, Technical Transactions. Mechanics, 2-M, 43-48
Search in Google Scholar Back to article
Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a. Simulation of Cavitation Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 1-6. DOI: 10.21741/9781945291814-110.21741/9781945291814-1
Open DOI Search in Google Scholar Back to article
Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b. Simulation of Particle Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 17-24. DOI: 10.21741/9781945291814-410.21741/9781945291814-4
Open DOI Search in Google Scholar Back to article
Ferdek, U.; Kozien, M. S. 2013. Simulation of Application of FGM Piezoelectric Actuators for Active Reduction of Beam Vibrations. Acta Physica Polonica A, 123, 1044-1047. DOI: 10.12693/APhysPolA.123.104410.12693/APhysPolA.123.1044
Open DOI Search in Google Scholar Back to article
Gadek-Moszczak, A., Radek, N., Wronski, S., Tarasiuk, J., 2014. Application the 3D image analysis techniques for assessment the quality of material surface layer before and after laser treatment. Adv. Mat. Res. Switz., 874, 133-138. DOI: 10.4028/www.scientific.net/AMR.874.13310.4028/www.scientific.net/AMR.874.133
Open DOI Search in Google Scholar Back to article
Gawlik, J., Kielbus, A., Karpisz, D., 2015. Application of an integrated database system for processing difficult material. Solid State Phenomena, 223, 35-45. DOI: 10.4028/www.scientific.net/SSP.223.3510.4028/www.scientific.net/SSP.223.35
Open DOI Search in Google Scholar Back to article
Karpisz, D., Kielbus, A., 2018. Selected problems of designing modern industrial databases. MATEC Web Conf., 183, art. 01017. DOI: 10.1051/matecconf/20181830101710.1051/matecconf/201818301017
Open DOI Search in Google Scholar Back to article
Kielbus, A., Karpisz, D., 2019. Risk management as a process security tool. System Safety: Human-Technical Facility-Environment, 1, 234-239. DOI: 10.2478/czoto-2019-003010.2478/czoto-2019-0030
Open DOI Search in Google Scholar Back to article
Kozien, E., Kozien, M.S., 2017. Interval analysis as a method of measurement of uncertainity in the check-list method applied to identification of stage phase of companies. 26^th Int. Scientific Conf. Economic and Social Development. Zagreb, Varazdin, 210-215.
Search in Google Scholar Back to article
Krawczyk, J., Sobczyk, A., 2018. Tests of New Methods of Manufacturing Elements for Water Hydraulics. Materials Research Proceedings, 5, 200-205. DOI: 10.21741/9781945291814-3510.21741/9781945291814-35
Open DOI Search in Google Scholar Back to article
Lipinski, T., Wach, A., 2014. Influence of outside furnace treatment on purity medium carbon steel. Metal 2014: 23^rd Int. Conf. Metallurgy And Materials, Ostrava, Tanger, 738-743.
Search in Google Scholar Back to article
Lisowski E., Filo G., Rajda J., 2015. Pressure compensation using flow forces in a multi-section proportional directional control valve, Energy Conv. Manag., 103, 1052-1064. DOI: 10.1016/j.enconman.2015.07.03810.1016/j.enconman.2015.07.038
Open DOI Search in Google Scholar Back to article
Lisowski E., Filo G., Rajda J., 2018. Analysis of flow forces in the initial phase of throttle gap opening in a proportional control valve, Flow Meas. Instrum., 59, 157-167. DOI: 10.1016/j.flowmeasinst.2017.12.01110.1016/j.flowmeasinst.2017.12.011
Open DOI Search in Google Scholar Back to article
Lisowski E., Filo G., Rajda J., 2016. CFD analysis of the characteristics of a proportional flow control valve with an innovative opening shape, Energy Conv. Manag., 123, 15-28. DOI: 10.1016/j.enconman.2016.06.02510.1016/j.enconman.2016.06.025
Open DOI Search in Google Scholar Back to article
Opydo, M., Kobylecki, R., Dudek, A., Bis, Z. 2016. The effect of biomass co-combustion in a CFB boiler on solids accumulation on surfaces of P91 steel tube samples. Biomass & Bioenergy, 85, 61-68. DOI: 10.1016/j.biombioe.2015.12.01110.1016/j.biombioe.2015.12.011
Open DOI Search in Google Scholar Back to article
Pietraszek, J., Kolomycki, M., Szczotok, A., Dwornicka, R., 2016. The fuzzy approach to assessment of ANOVA results. ICCCI 2016: Conf. on Comp. Collective Intell. Springer, 260-268. DOI: 10.1007/978-3-319-45243-2_2410.1007/978-3-319-45243-2_24
Open DOI Search in Google Scholar Back to article
Pobedza, J., Sobczyk, A., 2013. Modern Coating Used in High Pressure Water Hydraulic Components. Key Engineering Materials, 542, 143-155. DOI: 10.4028/www.scientific.net/KEM.542.14310.4028/www.scientific.net/KEM.542.143
Open DOI Search in Google Scholar Back to article
Radek, N., Szczotok, A., Gadek-Moszczak, A., Dwornicka, R., Broncek, J., Pietraszek, J., 2018. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Arch. Metall. Mater., 63, 809-816. DOI: 10.24425/12240710.24425/122407
Open DOI Search in Google Scholar Back to article
Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE 2018, 13, art. e0202556. DOI: 10.1371/journal.pone.020255610.1371/journal.pone.0202556610499630133513
Search in Google Scholar Back to article
Szczotok, A., Radek, N., Dwornicka, R., 2018. Effect of the induction hardening on microstructures of the selected steels. METAL 2018: 27^th Int. Conf. Metallurgy and Materials. Ostrava, Tanger, 1264-1269.
Search in Google Scholar Back to article

Numerical Simulation of Fluid Flow inside the Flow Control Valve

Abstract

Paradigm

My account