Quality Improvement of a Gear Transmission by Means of Genetic Algorithm

Lempa, Paweł; Lisowski, Edward; Masui, Fumito; Filo, Grzegorz; Ptaszynski, Michal; Domagała, Mariusz; Fabiś-Domagała, Joanna

doi:10.2478/cqpi-2019-0052

Abstract

The article deals with the issue of quality improvement of a gear transmission by optimizing its geometry with the use of genetic algorithms. The optimization method is focused on increasing productivity and efficiency of the pump and reducing its pulsation. The best results are tested on mathematical model and automatically modelled in 3D be means of PTC Creo Software. The developed solution proved to be an effective tool in the search for better results, which greatly improved parameters of pump especially reduced flow pulsation.

References

Augustyn, E.; Kozien, M. S. 2014. A Study on Possibility to Apply Piezoelectric Actuators for Active Reduction of Torsional Beams Vibrations. Acta Physica Polonica A, 125, A164-A168.10.12693/APhysPolA.125.A-164
Search in Google Scholar Back to article
El-Mahdy, O., Ahmed, M., Metwalli, S., 2010. Computer aided optimization of natural gas pipe networks using genetic algorithm. Applied Soft Computing, 10, 1141–50. DOI: 10.1016/j.asoc.2010.05.01010.1016/j.asoc.2010.05.010
Search in Google Scholar Back to article
Frith, R., Scott, W., 1996. Comparison of an external gear pump wear model with test data. Wear, 196, 64–71. DOI: 10.1016/0043-1648(95)06845-710.1016/0043-1648(95)06845-7
Open DOI Search in Google Scholar Back to article
Fuh, J., Li, W., 2005. Advances in collaborative CAD: the-state-of the art. Computer Aided Design, 37, 571–81. DOI: 10.1016/j.cad.2004.08.005.10.1016/j.cad.2004.08.005
Open DOI Search in Google Scholar Back to article
Gadek-Moszczak, A., Pietraszek, J., Jasiewicz, B., Sikorska, S., Wojnar, L., 2015. The bootstrap approach to the comparison of two methods applied to the evaluation of the growth index in the analysis of the digital x-ray image of a bone regenerate. New Trends in Comp. Coll. Intell., 572, 127-136. DOI: 10.1007/978-3-319-10774-5_1210.1007/978-3-319-10774-5_12
Open DOI Search in Google Scholar Back to article
Gen, M., Cheng, R., 2000. Genetic algorithms and engineering optimization Vol. 7. Wiley, Hoboken.10.1002/9780470172261
Search in Google Scholar Back to article
Goldberg, D.E., Holland, J.H., 1988. Genetic algorithms and machine learning. Machine Learning, 3, 95–9.10.1023/A:1022602019183
Open DOI Search in Google Scholar Back to article
Grefenstette, J.J., 1986. Optimization of control parameters for genetic algorithms. IEEE Transactions on Systems, Man and Cybernetics, 16, 122–8.10.1109/TSMC.1986.289288
Search in Google Scholar Back to article
Hu, Z.H., Ding, Y.S., Zhang, W.B., Yan, Q., 2008. An interactive co-evolutionary CAD system for garment pattern design. Computer Aided Design, 40, 1094–104. DOI: 10.1016/j.cad.2008.10.01010.1016/j.cad.2008.10.010
Open DOI Search in Google Scholar Back to article
Ionel, I.I., 1986. Pumps and pumping. Elsevier, New York.
Search in Google Scholar Back to article
Ivantysyn, J., Ivantysynova, M., 2003. Hydrostatic pumps and motors: principles, design, performance, modelling, analysis, control and testing. Tech Books International.
Search in Google Scholar Back to article
Karpisz, D., Kielbus, A., 2018. Selected problems of designing modern industrial databases. MATEC Web Conf., 183, art. 01017. DOI: 10.1051/matecconf/20181830101710.1051/matecconf/201818301017
Open DOI Search in Google Scholar Back to article
Kielbus, A., Karpisz, D., 2019. Risk management as a process security tool. System Safety: Human-Technical Facility-Environment, 1, 234-239. DOI: 10.2478/czoto-2019-003010.2478/czoto-2019-0030
Open DOI Search in Google Scholar Back to article
Kita, E., Tanie, H., 1997. Shape optimization of continuum structures by genetic algorithm and boundary element method. Engineering Analysis with Boundary Elements, 19, 129–36. DOI: 10.1016/S0955-7997(97)00014-310.1016/S0955-7997(97)00014-3
Open DOI Search in Google Scholar Back to article
Kollek W. Pompy zebate – konstrukcja i eksploatacja. Zakład Narodowy im. Ossolinskich; 1996.
Search in Google Scholar Back to article
Kozien, E., Kozien, M.S., 2017. Academic governance as a determinant of efficient management of a university in Poland - legal and comparative perspective. ESD 2017: Economic and Social Development Conf., Madrid, Varazdin, 38-47.
Search in Google Scholar Back to article
Krenich, S., 2017. Multi-thread evolutionary computation for design optimization. Technical Transactions, 9, 197-20610.4467/2353737XCT.17.159.7171
Search in Google Scholar Back to article
Lampinen J., 2003. CAM shape optimisation by genetic algorithm. Computer Aided Design, 35, 727–37. DOI: 10.1016/S0010-4485(03)00004-610.1016/S0010-4485(03)00004-6
Open DOI Search in Google Scholar Back to article
Ladd, S.R., 1995. Genetic algorithms in C++. Hungry Minds, New York.
Search in Google Scholar Back to article
Langdon, W.B., Poli, R., 2002. Foundations of genetic programming. Springer.10.1007/978-3-662-04726-2
Open DOI Search in Google Scholar Back to article
Melanie, M., 1999. An introduction to genetic algorithms. Cambridge, Massachusetts.
Search in Google Scholar Back to article
Opydo, M., Kobylecki, R., Dudek, A., Bis, Z. 2016. The effect of biomass co-combustion in a CFB boiler on solids accumulation on surfaces of P91 steel tube samples. Biomass & Bioenergy, 85, 61-68. DOI: 10.1016/j.biombioe.2015.12.01110.1016/j.biombioe.2015.12.011
Open DOI Search in Google Scholar Back to article
Osmera, P., Lacko, B., Peter M., 2003. Parallel Evolutionary Algorithms, 2003 IEEE Int. Symposium Computational Intelligence in Robotics and Automation, Kobe, IEEE, 1348-1353.10.1109/CIRA.2003.1222193
Search in Google Scholar Back to article
Pacana, J., Pacana, A., 2018. Analysis of Possibilities of Using Polymeric Materials for Testing Prototypes of Harmonic Drive. Materials Research Proceedings, 5, 61-66. DOI: 10.21741/9781945291814-1110.21741/9781945291814-11
Open DOI Search in Google Scholar Back to article
Pal, P., Tigga, A., Kumar, A., 2005. Feature extraction from large cad databases using genetic algorithm. Computer Aided Design, 37, 545–58. DOI: 10.1016/j.cad.2004.08.00210.1016/j.cad.2004.08.002
Open DOI Search in Google Scholar Back to article
Park, H.S., Dang, X.P., 2010. Structural optimization based on CAD–CAE integration and metamodeling techniques. Computer-Aided Design, 42, 889-902. DOI: 10.1016/j.cad.2010.06.003.10.1016/j.cad.2010.06.003
Open DOI Search in Google Scholar Back to article
Pietraszek, J., Dwornicka, R., Krawczyk, M., Kołomycki, M., 2017. The non-parametric approach to the quantification of the uncertainty in the design of experiments modelling. UNCECOMP 2017: 2^nd Int. Conf. Uncertainty Quantification in Computational Sciences and Engineering, Rhodes, NTU of Athens, 598-604. DOI: 10.7712/120217.5395.1722510.7712/120217.5395.17225
Open DOI Search in Google Scholar Back to article
Pietraszek, J., Goroshko, A., 2014. The heuristic approach to the selection of experimental design, model and valid pre-processing transformation of DoE outcome. Advanced Materials Research-Switzerland, 874, 145-149. DOI: 10.4028/www.scientific.net/AMR.874.14510.4028/www.scientific.net/AMR.874.145
Open DOI Search in Google Scholar Back to article
Radek, N., Pasieczynski, L., Makrenek, M., Dudek, A., 2018. Mechanical Properties of Anti-Graffiti Coating Systems used in the Railway Industry. Materials Research Proceedings, 5, 243-247. DOI: 10.21741/9781945291814-4310.21741/9781945291814-43
Open DOI Search in Google Scholar Back to article
Radek, N., Pietraszek, J., Antoszewski, B., 2014. The Average Friction Coefficient of Laser Textured Surfaces of Silicon Carbide Identified by RSM Methodology. Adv. Mat. Res.-Switz., 874, 29-34. DOI: 10.4028/www.scientific.net/AMR.874.2910.4028/www.scientific.net/AMR.874.29
Open DOI Search in Google Scholar Back to article
Shi, X., 2011. Design optimization of insulation usage and space conditioning load using energy simulation and genetic algorithm. Energy, 36, 1659–67. DOI: 10.1016/j.energy.2010.12.06410.1016/j.energy.2010.12.064
Open DOI Search in Google Scholar Back to article
Stroustrup, B., 2000. The C++ Programming Language. The C++ Programming Language (Special Edition). Addison-Wesley, Reading.
Search in Google Scholar Back to article
Szczotok, A., Radek, N., Dwornicka, R., 2018. Effect of the induction hardening on microstructures of the selected steels. METAL 2018: 27^th Int. Conf. Metallurgy and Materials. Ostrava, Tanger, 1264-1269.
Search in Google Scholar Back to article
Wang, N., Tai, K., 2010. Target matching problems and an adaptive constraint strategy for multiobjective design optimization using genetic algorithms. Computers and Structures, 88, 1064–73. DOI: 10.1016/j.compstruc.2010.06.00210.1016/j.compstruc.2010.06.002
Open DOI Search in Google Scholar Back to article
Wang, D., Zhang, W., Yang, J., Wang, Z., 2012. A virtual punching method for shape optimization of openings on curved panels using CAD-based boolean operations. Computer Aided Design, 44, 388–99. DOI: 10.1016/j.cad.2012.01.00310.1016/j.cad.2012.01.003
Open DOI Search in Google Scholar Back to article
Wang, N.F., Tai, K., 2010. Target matching problems and an adaptive constraint strategy for multiobjective design optimization using genetic algorithms. Computers and Structures, 88, 1064-1073. DOI: 10.1016/j.compstruc.2010.06.00210.1016/j.compstruc.2010.06.002
Open DOI Search in Google Scholar Back to article

Quality Improvement of a Gear Transmission by Means of Genetic Algorithm

Abstract

Paradigm

My account