Reliability of Variability Source Detection in Shainin's Component Search Procedure

Pietraszek, Jacek; Dwornicka, Renata; Goroshko, Andrii

doi:10.2478/cqpi-2019-0048

Abstract

Shainin's component search procedure uses variability source detection based on specific median test. This approach has only two triple subsets and the certainty of inference can be weak for this reason. This paper checks this approach by series of numerical simulations.

References

Bhote, K., 2000. World Class Quality: Using Design of Experiments to Make It Happen, Amacom, New York.
Search in Google Scholar Back to article
Gadek-Moszczak, A., 2017. History of stereology. Image Analysis & Stereology, 36, 151-152. DOI: 10.5566/ias.186710.5566/ias.1867
Open DOI Search in Google Scholar Back to article
Gadek-Moszczak, A., Matusiewicz, P., 2017. Polish stereology - a historical review. Image Analysis & Stereology, 36, 207-221. DOI: 10.5566/ias.180810.5566/ias.1808
Open DOI Search in Google Scholar Back to article
Gadek-Moszczak, A., Radek, N., Wronski, S., Tarasiuk, J., 2014. Application the 3D image analysis techniques for assessment the quality of material surface layer before and after laser treatment. Adv. Mat. Res. Switz., 874, 133-138. DOI: 10.4028/www.scientific.net/AMR.874.13310.4028/www.scientific.net/AMR.874.133
Open DOI Search in Google Scholar Back to article
Karpisz, D., Kielbus, A., 2019. The Revitalization of Radar System as a Case of Functional and Information Security Problems. System Safety: Human - Technical Facility – Environment, 1, 692-699. DOI: 10.2478/czoto-2019-008810.2478/czoto-2019-0088
Open DOI Search in Google Scholar Back to article
Lisiecka, B., Dudek, A., 2018. The Surface Treatment of Sintered Stainless Steel. Materials Research Proceeding, 5, 148-153. DOI: 10.21741/9781945291814-2610.21741/9781945291814-26
Open DOI Search in Google Scholar Back to article
Orman, L.J., Radek, N., Broncek, J., 2018a. Sintered Mesh Layers for the Production of Efficient Phase - Change Heat Exchangers. Materials Research Proceedings, 5, 189-193. DOI: 10.21741/9781945291814-3310.21741/9781945291814-33
Open DOI Search in Google Scholar Back to article
Orman, L.J., Radek, N., Kapjor, A., 2018b. Surface Treatment Technologies for Boiling Heat Transfer Augmentation. Materials Research Proceedings, 5, 216-219. DOI: 10.21741/9781945291814-3810.21741/9781945291814-38
Open DOI Search in Google Scholar Back to article
Osocha, P., 2018. Calculation of Residual Life for P91 Material Based on Creep Rate and Time to Rupture. Materials Research Proceedings, 5, 177-182. DOI: 10.21741/9781945291814-3110.21741/9781945291814-31
Open DOI Search in Google Scholar Back to article
Pacana, J., Pacana, A., 2018. Analysis of Possibilities of Using Polymeric Materials for Testing Prototypes of Harmonic Drive. Materials Research Proceedings, 5, 61-66. DOI: 10.21741/9781945291814-1110.21741/9781945291814-11
Open DOI Search in Google Scholar Back to article
Pasieczynski, L., Radek, N., Klonica, M., Kaminski, J., Swiderski, J., 2018. Properties of BO100-AGR Clearcoat Anti-Graffiti Coating Systems used in the Railway Industry. Materials Research Proceedings, 5, 225-230. DOI: 10.21741/9781945291814-4010.21741/9781945291814-40
Open DOI Search in Google Scholar Back to article
Pietraszek, J., Kolomycki, M., Szczotok, A., Dwornicka, R., 2016. The fuzzy approach to assessment of ANOVA results. ICCCI 2016: Conf. on Comp. Collective Intell. Springer, 260-268. DOI: 10.1007/978-3-319-45243-2_2410.1007/978-3-319-45243-2_24
Open DOI Search in Google Scholar Back to article
Pliszka, I., Radek, N., Gadek-Moszczak, A., Fabian, P., Paraska, O., 2018. Surface Improvement by WC-Cu Electro-Spark Coatings with Laser Modification. Materials Research Proceedings, 5, 237-242. DOI: 10.21741/9781945291814-4210.21741/9781945291814-42
Open DOI Search in Google Scholar Back to article
Radek, N., Pietraszek, J., Antoszewski, B., 2014. The Average Friction Coefficient of Laser Textured Surfaces of Silicon Carbide Identified by RSM Methodology. Adv. Mat. Res.-Switz., 874, 29-34. DOI: 10.4028/www.scientific.net/AMR.874.2910.4028/www.scientific.net/AMR.874.29
Open DOI Search in Google Scholar Back to article
Ulewicz, R., Selejdak, R., 2018. Impact of Laser Machining on the Structure and Properties of Tool Steels. Materials Research Proceeding, 5, 37-40. DOI: DOI: 10.21741/9781945291814-710.21741/9781945291814-7
Open DOI Search in Google Scholar Back to article
Strzelczak, K., Dudek, A., 2018. Characteristics of Multimaterial Joints of Nickel-Based Superalloys. Materials Research Proceedings, 5, 166-171. DOI: 10.21741/9781945291814-2910.21741/9781945291814-29
Open DOI Search in Google Scholar Back to article

Reliability of Variability Source Detection in Shainin's Component Search Procedure

Abstract

Paradigm

My account