Trends in Rapid Prototyping and Smart Engineering for Central Europe Based on the 3DCentral Project

Karpisz, Dariusz; Kiełbus, Anna; Brunner, Johannes

doi:10.2478/cqpi-2019-0049

Abstract

The article presents the main trends in Rapid Prototyping and Smart Engineering. The potential of Central European regions was demonstrated and characterized on the mentioned basis of which e-learning trainings were developed. Based on the implemented international project “3DCentral – Catalyzing Smart Engineering and Rapid Prototyping”, selected conclusions from the implementation of the training program are presented.

References

Deliverable D.T1.1.1, 2018. Report on knowledge, transfer and case management for the project core group and their stakeholders. 3DCentral project documentation.
Search in Google Scholar Back to article
Deliverable D.T2.3.1, 2016. Curriculum & recruiting scheme for KITTS - Knowledge Innovation Technology Transfer Scouts network. 3DCentral project documentation.
Search in Google Scholar Back to article
Deliverable D.T2.3.3, 2018. Report On KITTS Network. 3DCentral project documentation.
Search in Google Scholar Back to article
Deliverable D.T2.3.4, 2018. Report on CE Brain Base. 3DCentral project documentation.
Search in Google Scholar Back to article
Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a. Simulation of Cavitation Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 1-6. DOI: 10.21741/9781945291814-110.21741/9781945291814-1
Open DOI Search in Google Scholar Back to article
Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b. Simulation of Particle Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 17-24. DOI: 10.21741/9781945291814-410.21741/9781945291814-4
Open DOI Search in Google Scholar Back to article
Fabis-Domagala, J., Filo, G., Momeni, H., Domagala, M., 2018. Instruments of identification of hydraulic components potential failures. MATEC Web Conf., 183, art. 03008. DOI: 10.1051/matecconf/20181830300810.1051/matecconf/201818303008
Open DOI Search in Google Scholar Back to article
Filo, G., Lisowski, E., Domagala, M., Fabis-Domagala, J., Momeni, H., 2018. Modelling of pressure pulse generator with the use of a flow control valve and a fuzzy logic controller. AIP Conf. Proc., 2029, art. 020015. DOI: 10.1063/1.506647710.1063/1.5066477
Open DOI Search in Google Scholar Back to article
Gadek-Moszczak, A., Radek, N., Wronski, S., Tarasiuk, J., 2014. Application the 3D image analysis techniques for assessment the quality of material surface layer before and after laser treatment. Adv. Mat. Res. Switz., 874, 133-138. DOI: 10.4028/www.scientific.net/AMR.874.13310.4028/www.scientific.net/AMR.874.133
Open DOI Search in Google Scholar Back to article
Goffin K., Mitchell R., 2016. Innovation Management: Efective strategy & implementation. Macmillan Education, London.
Search in Google Scholar Back to article
Jashapara, A., 2010. Knowledge Management. Pearson Education Limited, London.
Search in Google Scholar Back to article
Kozien, E., 2017. Identification of stage phase growth in the checklist method using different statistical parameters. 20^th Int. Sci. Conf. Economic and Social Development, Prague, Varazdin, 538-545.
Search in Google Scholar Back to article
Kozien, E., Kozien, A., 2017. Commercialization of scientific research results and transfer knowledge and technologies to economy as determinants of development of universities and enterprises in Poland - legal and economic perspective. 26^th Int. Sci. Conf. Economic and Social Development, Zagreb, Varazdin, 326-335.
Search in Google Scholar Back to article
Lipinski, T., 2010. The structure and mechanical properties of Al-7%SiMg alloy treated with a homogeneous modifier. Solid State Phenomena, 163, 183-186. DOI: 10.4028/www.scientific.net/SSP.163.18310.4028/www.scientific.net/SSP.163.183
Open DOI Search in Google Scholar Back to article
Osocha, P., 2018. Calculation of Residual Life for P91 Material Based on Creep Rate and Time to Rupture. Materials Research Proceedings, 5, 177-182. DOI: 10.21741/9781945291814-3110.21741/9781945291814-31
Open DOI Search in Google Scholar Back to article
Ouma-Onyango, R., 2018. Information resources and technology transfer management in developing countries. Routledge Library Editions.10.4324/9781351131230
Search in Google Scholar Back to article
Pacana, J., Pacana, A., 2018. Analysis of Possibilities of Using Polymeric Materials for Testing Prototypes of Harmonic Drive. Materials Research Proceedings, 5, 61-66. DOI: 10.21741/9781945291814-1110.21741/9781945291814-11
Open DOI Search in Google Scholar Back to article
Pasieczynski, L., Radek, N., Klonica, M., Kaminski, J., Swiderski, J., 2018. Properties of BO100-AGR Clearcoat Anti-Graffiti Coating Systems used in the Railway Industry. Materials Research Proceedings, 5, 225-230. DOI: 10.21741/9781945291814-4010.21741/9781945291814-40
Open DOI Search in Google Scholar Back to article
Pietraszek, J., Kolomycki, M., Szczotok, A., Dwornicka, R., 2016. The fuzzy approach to assessment of ANOVA results. ICCCI 2016: Conf. on Comp. Collective Intell. Springer, 260-268. DOI: 10.1007/978-3-319-45243-2_2410.1007/978-3-319-45243-2_24
Open DOI Search in Google Scholar Back to article
Pliszka, I., Radek, N., Gadek-Moszczak, A., Fabian, P., Paraska, O., 2018. Surface Improvement by WC-Cu Electro-Spark Coatings with Laser Modification. Materials Research Proceedings, 5, 237-242. DOI: 10.21741/9781945291814-4210.21741/9781945291814-42
Open DOI Search in Google Scholar Back to article
Radek, N., Pietraszek, J., Szczotok, A., 2018a. Microstructure and Tribological Properties of ESD Coatings after Laser Processing. Materials Research Proceedings, 5, 206-209. DOI: 10.21741/9781945291814-3610.21741/9781945291814-36
Open DOI Search in Google Scholar Back to article
Radek, N., Szczotok, A., Gadek-Moszczak, A., Dwornicka, R., Broncek, J., Pietraszek, J., 2018b. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Arch. Metall. Mater., 63, 809-816. DOI: 10.24425/12240710.24425/122407
Open DOI Search in Google Scholar Back to article
Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE 2018, 13, art. e0202556. DOI: 10.1371/journal.pone.020255610.1371/journal.pone.020255610.1371/journal.pone.0202556
Search in Google Scholar Back to article
Szczotok, A., Radek, N., Dwornicka, R., 2018. Effect of the induction hardening on microstructures of the selected steels. METAL 2018: 27th Int. Conf. Metallurgy and Materials. Ostrava, Tanger, 1264-1269.
Search in Google Scholar Back to article
Ulewicz, R., Selejdak, R., 2018. Impact of Laser Machining on the Structure and Properties of Tool Steels. Materials Research Proceeding, 5, 37-40. DOI: 10.21741/9781945291814-710.21741/9781945291814-7
Open DOI Search in Google Scholar Back to article
Work Package T1, 2016. BUILD! Transnational hub for common knowledge. MINDCONSULT, 3DCentral project documentation.
Search in Google Scholar Back to article

Trends in Rapid Prototyping and Smart Engineering for Central Europe Based on the 3DCentral Project

Abstract

Paradigm

My account