References
- A 615/A 615M - 15a. (2015). Standard Specification for Deformed and Plain Carbon Steel Bars for Concrete. American Society for Testing and Materials.
- Addenbrooke, T. I. (1994). A flexibility number for the displacement controlled design of multi propped retaining walls. Ground Engrg., London, September, 41–45.
- Al-Rubaye, M. M., Yousef, R. F., Muteb, H. H., & Al-Rubaye, M. M. (2020). Experimental evaluation of bond strength performance between normal concrete substrate and different overlay materials. Journal of Engineering Science and Technology, 15(6), 4367–4382.
- ASTM C469. (2011). Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. In American Society for Testing and Materials (ASTM) International (pp. 1–5). https://doi.org/doi:10.1520/C0496.
- ASTM C78/C78M-22. (2010). Standard test method for flexural strength of concrete (using simple beam with third-point loading). American Society for Testing and Materials, 100, 12959–19428.
- ASTM Standard C496. (2011). Standard test method for splitting tensile strength of cylindrical concrete specimens. ASTM international.
- Barka, M., Taleb, O., Tedjditi, A. K., Soualhi, H., Benosman, A. S., & Mouli, M. (2024). Impact of polypropylene fibers on the rheological, mechanical, and thermal properties of self-compacting concrete. MRS Advances, 9(14), 1128–1136. https://doi.org/10.1557/s43580-024-00905-1
- Bleyhl, A. (2018). Experimental Study on a New Type of Transverse Connection for Nebraska County Bridge System.
- BS EN 12390-3. (2009). Testing hardened concrete. Compressive strength of test specimens. British Standards Institution, UK.
- Clough, G. W., and O’Rourke, T. D. (1990). Construction induced movements of insitu walls. In Specialty Conference on Design and Performance of Earth Retaining Structures (pp. 439–470). https://doi.org/10.1061/(ASCE)0733-9410(1992)118:4(662.2)
- Comodromos, E. M., Papadopoulou, M. C., & Konstantinidis, G. K. (2013). Effects from diaphragm wall installation to surrounding soil and adjacent buildings. Computers and Geotechnics, 53, 106–121. https://doi.org/10.1016/j.compgeo.2013.05.003
- de Alencar Monteiro, V. M., Lima, L. R., & de Andrade Silva, F. (2018). On the mechanical behavior of polypropylene, steel and hybrid fiber reinforced self-consolidating concrete. Construction and Building Materials, 188, 280–291. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.08.103
- Deng, H.-S., Fu, H.-L., Yimin, wu, Zhao, Y.-B., & Yi, H.-D. (2023). Fatigue fracture experiment of concrete members with cold joints under low stress and low stress amplitude fatigue load. Theoretical and Applied Fracture Mechanics, 127, 104041. https://doi.org/10.1016/j.tafmec.2023.104041
- EFNARC. (2005). The European Guidelines for Self-Compacting Concrete,Specification and Production and Use. Association House, UK.
- Feng, P., Cheng, S., Bai, Y., & Ye, L. (2015). Mechanical behavior of concrete-filled square steel tube with FRP-confined concrete core subjected to axial compression. Composite Structures, 123. https://doi.org/10.1016/j.compstruct.2014.12.053
- Feng, P., Qiang, H., & Ye, L.-P. (2017). Discussion and definition on yield points of materials, members and structures. Gongcheng Lixue/Engineering Mechanics, 34, 36–46. https://doi.org/10.6052/j.issn.1000-4750.2016.03.0192
- Gaba, A. R., Simpson, B., Beadman, D. R., & Powrie, W. (2003). Embedded retaining walls: Guidance for economic design. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 156(1), 13–15. https://doi.org/10.1680/geng.2003.156.1.13
- Houhou, M. N., Emeriault, F., & Belounar, A. (2019). Three-dimensional numerical back-analysis of a monitored deep excavation retained by strutted diaphragm walls. Tunnelling and Underground Space Technology, 83, 153–164.
- Iraqi Specification No.5. (2019). Cement Portland (pp. 21–23). National Center for Structural Laboratory, Planning Council, Baghdad, Iraq.
- Iraqi specification requirements IQ.S 45. (2016). Aggregates of Natural Resources used for Concrete and Construction. National Center for Structural Laboratory, Planning Council, Baghdad, Iraq.
- John Newman, B. S. C. (2003). Advanced_Concrete_Technology_3_Processes.pdf. Amsterdam : Elsevier, 2003.
- Kisan, M., Sangathan, S., & Nehru, J. (1996). Design And Construction of Diaphragms for Under-Seepage Control - Code of Practice. In Indian Standard.
- Li, K., Chen, S., Pei, R., & Li, Y. (2024). Theoretical Study on Diaphragm Wall and Surface Deformation Due to Foundation Excavation Based on Three-Parameter Kerr Model. In Sustainability (Switzerland) (Vol. 16, Issue 6). https://doi.org/10.3390/su16062295
- Lim, A., Ou, C.-Y., & Hsieh, P.-G. (2018). Investigation of the integrated retaining system to limit deformations induced by deep excavation. Acta Geotechnica, 13. https://doi.org/10.1007/s11440-017-0613-6
- Liu, Y., Yang, G., Qi, C., Zhang, P., Cui, T., & Song, R. (2025). Experimental and Numerical Research on the Mechanical Properties of a Novel Prefabricated Diaphragm Wall–Beam Joint. Buildings, 15(7), 1–19. https://doi.org/10.3390/buildings15071158
- Mana, A. I., and C. (1981). Prediction of movements for braced cuts in clay. Journal of Geotechnical and Geoenvironmental Engineering, 107(6), 759–777. https://doi.org/http://ojps.aip.org/gto
- Mana, A. I., & Clough, G. W. (1981). PREDICTION OF MOVEMENTS FOR BRACED CUTS IN CLAY. Journal of the Geotechnical Engineering Division, 107(6), 759–777. https://doi.org/10.1061/ajgeb6.0001150
- Mhawish, A. H., & Risan, H. K. (2024). The Behavior of Concrete Cantilever Retaining Walls During Far-Field and Near-Fault Earthquakes. Civil and Environmental Engineering, 20(1), 14–26. https://doi.org/10.2478/cee-2024-0002
- Mohod, M. V. (2015). Performance of polypropylene fibre reinforced concrete. IOSR Journal of Mechanical and Civil Engineering, 12(1), 28–36.
- Moormann, C. (2004). Analysis of wall and ground movement due to deep exavation in soft soil based on a new worldwide data ase. Soil and Foundation, 44(1), 87–98.
- Ouedraogo, I., Ouadif, L., & Bahi, A. (2025). Diaphragm Wall Behaviour Under Thick Alluvium Layer Conditions. Civil and Environmental Engineering, 21(1), 51–64. https://doi.org/10.2478/cee-2025-0005
- Park, R., & Paulay, T. (1991). Reinforced concrete structures. John Wiley & Sons.
- Pereira, J. R., Palma E Silva, J. B. L., Gachet, L. A., Dos Santos, A. C., & Lintz, R. C. C. (2023). Evaluation of the Addition of Polypropylene (PP) Fibers in Self-compacting Concrete (SCC) to Control Cracking and Plastic Shrinkage between Different Methods. In Materials Research (Vol. 26). https://doi.org/10.1590/1980-5373-MR-2022-0567
- Potts, D. M., and Day, R. A. (1990). Discussion. Use of Sheet Pile Retaining Walls for Deep Excavations in Stiff Clay. Proceedings of the Institution of Civil Engineers, London, Part 1, 88, 899–927. https://doi.org/10.1680/iicep.1991.17394
- Qiu, T., Zhang, J., Chen, X., Xu, Z., Su, D., Song, R., & Cui, T. (2023). Experimental investigation and mechanical model for assembled joints of prefabricated two-wall-in-one diaphragm walls. Engineering Structures, 275, 115285.
- Reddy, T., & Reddy, D. (2023). Destructive and Non-Destructive Analysis of Polypropylene Fibre Reinforced Concrete. International Journal of Scientific Research in Science and Technology, 79–88. https://doi.org/10.32628/IJSRST52310313
- Roesler, J. (2019). Effect of Macrofibers on Behavior and Performance of Concrete Slabs and Overlays. In National Concrete Consortium.
- Sika’s ViscoCrete 180G. (2022). https://irq.sika.com/en/construction/concrete-admixtures/sika-viscocrete-180g.html (p. Version 04.02).
- Spruit, R., van Tol, F., Broere, W., Doornenbal, P., & Hopman, V. (2017). Distributed temperature sensing applied during diaphragm wall construction. Canadian Geotechnical Journal, 54(2), 219–233.
- Spruit, R., van Tol, F., Broere, W., Slob, E., & Niederleithinger, E. (2014). Detection of anomalies in diaphragm walls with crosshole sonic logging. Canadian Geotechnical Journal, 51(4), 369–380.
- Superczyńska, M., Józefiak, K., & Zbiciak, A. (2016). Numerical Analysis of Diaphragm Wall Model Executed in Poznań Clay Formation Applying Selected FEM Codes. Archives of Civil Engineering, 62, 207–224. https://doi.org/10.1515/ace-2015-0093
- Wang, J., Xiong, W., & Cai, C. S. (2024). Flexural performance of rigid joints for diaphragm walls: Experimental investigation and numerical analysis. Case Studies in Construction Materials, 20, e02936. https://doi.org/https://doi.org/10.1016/j.cscm.2024.e02936
- Yan, N., Li, G., Qin, F., Qiao, X., Lu, B., Liang, N., & Zhao, S. (2025). Study on the deformation characteristics of diaphragm walls in deep excavations within the Ningbo soft soil region. Scientific Reports, 15(1), 15036. https://doi.org/doi.org/10.1038/s41598-025-95878-y
- Yang, M., Wu, R., Tong, C., Chen, J., & Tang, B. (2024). Displacement Analyses of Diaphragm Wall in Small-Scale Deep Excavation Considering Joints between Panels. In Buildings (Vol. 14, Issue 5). https://doi.org/10.3390/buildings14051449
- Yousef, R. F., Al-Rubaye, M. M., & Muteb, H. H. (2022). Mechanical and chemical bond for composite action of precast beams. In Curved and Layered Structures (Vol. 9, Issue 1, pp. 304–319). https://doi.org/10.1515/cls-2022-0024
- Yousef, R. F., Muteb, H. H., & Ibrahim, A. A. (2023). Studying the effect of embedded length strength of concrete and diameter of anchor on shear performance between old and new concrete. In Curved and Layered Structures (Vol. 10, Issue 1). https://doi.org/10.1515/cls-2022-0184
- Zhang, W., Hong, L., Li, Y., Zhang, R., Goh, A. T. C., & Liu, H. (2021). Effects of jet grouting slabs on responses for deep braced excavations. Underground Space, 6(2), 185–194. https://doi.org/https://doi.org/10.1016/j.undsp.2020.02.002