References
- ACI Standard and Report. (2014). Building Code Requirements for Structural Concrete. In American Concrete Institute, (p. 6858).
- Afefy, H. M., & Fawzy, T. M. (2013). Strengthening of RC one-way slabs including cut-out using different techniques. Engineering Structures, 57, 23–36. https://doi.org/10.1016/j.engstruct.2013.09.013
- Al-Issawi, A. S. H., & Kamonna, H. H. (2020). Experimental study of RC deep beams strengthened by NSM steel bars. Materials Today: Proceedings, 20(xxxx), 540–547. https://doi.org/10.1016/j.matpr.2019.09.186
- Al-Obaidi, S., Saeed, Y. M., & Rad, F. N. (2020). Flexural strengthening of reinforced concrete beams with NSM-CFRP bars using mechanical interlocking. Journal of Building Engineering, 31(August 2019), 101422. https://doi.org/10.1016/j.jobe.2020.101422
- Aljidda, O. (2024). Flexural Performance of Reinforced Concrete Slabs Strengthened with Near-Surface Mounted Bars (NSM) Technique.
- American Concrete Institute (ACI) Committee 318. Building code requirements for structural concrete (ACI 318-08) and commentary. Farmington Hills, Michigan, USA; 2008. (n.d.).
- Blaschko, M., and Zilch, K. _1999_. “Rehabilitation of concrete structures with CFRP strips glued into slits.” Proc., 12th Int. Conf. on Composite Materials _CD-ROM_, Organization of the Int. Conf. on Composite Materials, Paris, 7. (n.d.).
- Bonaldo, E., de Barros, J. A., & Lourenço, P. B. (2008). Efficient Strengthening Technique to Increase the Flexural Resistance of Existing RC Slabs. Journal of Composites for Construction, 12(2), 149–159. https://doi.org/10.1061/(asce)1090-0268(2008)12:2(149)
- Carolin, A. (2003). Carbon Fibre Reinforced Polymers for Strengthening of Structural Elements. In Thesis (Vol. 1992, Issue 10).
- Dalfré, G. M., & Barros, J. A. O. (2013). NSM technique to increase the load carrying capacity of continuous RC slabs. Engineering Structures, 56, 137–153. https://doi.org/10.1016/j.engstruct.2013.04.021
- Farghal, O. A. (2014). Resistance of Existing RC Slabs. Ain Shams Engineering Journal, 5(3), 667–680. https://doi.org/10.1016/j.asej.2014.03.007
- Fédération Internationale du Béton _FIB_. _2001_. “Externally bonded FRP reinforcement for RC structures.” Bulletin 14, Lausanne, Switzerland. (n.d.).
- GB/T 50152, Standard for Test Method of Concrete Structure, Ministry of Housing and Urban-Rural Construction, China, 2012, in Chinese. (n.d.).
- Hameed, M. O., & Daud, R. A. (2024). Behavior of Fatigue Damaged Reinforced Concrete One-Way Slabs Repaired With CFRP Sheets. Civil and Environmental Engineering, 20(1), 364–376. https://doi.org/10.2478/cee-2024-0028
- Hassan, N. Z., Ismael, H. M., & Salman, A. M. (2018). Study behavior of hollow reinforced concrete beams. Int. J. Curr. Eng. Technol, 8(6), 1640–1651.
- Henrik, T., Enrico, S., Suchart, L., & Guido, C. (2004). Failure Mode Analyses of Reinforced Concrete Beams Strengthened in Flexure with Externally Bonded Fiber-Reinforced Polymers. Journal of Composites for Construction, 8(2), 123–131. https://doi.org/10.1061/(ASCE)1090-0268(2004)8:2(123)
- Kazem, Z. U. M., & Al-Zahra, B. A. I. (2025). Performance Enhancement of Reinforced Concrete One-Way Slabs With Maximum-Moment Openings Using Cfrp Strengthening Techniques: Experimental and Numerical Analysis. Civil and Environmental Engineering, 28(1), 475–498. https://doi.org/10.2478/cee-2025-0036
- Ling, J. H., Lim, Y., & Jusli, E. (2023). Methods to Determine Ductility of Structural Members: A Review. Journal of the Civil Engineering Forum, Vol. 9.(2), 181–194. https://doi.org/10.22146/jcef.6631
- Liu, R., & Yang, Y. (2021). Research on fatigue performance of steel-plate-concrete composite slab. Thin-Walled Structures, 160(July 2020), 107339. https://doi.org/10.1016/j.tws.2020.107339
- Mostakhdemin Hosseini, M. R., Dias, S. J. E., & Barros, J. A. O. (2022). Fatigue behavior of RC slabs flexurally strengthened with prestressed NSM CFRP laminates. Structural Concrete, 23(3), 1780–1793. https://doi.org/10.1002/suco.202100289
- Schläfli, M., & Brühwiler, E. (1998). Fatigue of existing reinforced concrete bridge deck slabs. Engineering Structures, 20(11), 991–998. https://doi.org/10.1016/S0141-0296(97)00194-6
- Spadea, G., Swamy, R., & Bencardino, F. (2001). Strength and Ductility of RC Beams Repaired with Bonded CFRP Laminates. Journal of Bridge Engineering - J BRIDGE ENG, 6, 349–355. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:5(349)
- Tann, D. B., Davies, P., & Delpak, R. (2003). A review of ductility determination of FRP strengthened flexural RC elements. Fibre-Reinforced Polymer Reinforcement for Concrete Structures: (In 2 Volumes), 347–356.
- Tian, S., Zhang, X., & Hu, W. (2022). Fatigue Analysis of CFRP-Reinforced Concrete Ribbed Girder Bridge Deck Slabs. Polymers, 14(18). https://doi.org/10.3390/polym14183814
- Xie, J. H., Huang, P. Y., & Guo, Y. C. (2012). Fatigue behavior of reinforced concrete beams strengthened with prestressed fiber reinforced polymer. Construction and Building Materials, 27(1), 149–157. https://doi.org/10.1016/j.conbuildmat.2011.08.002
- Zhang, G., Zhang, Y., & Zhou, Y. (2018). Fatigue Tests of Concrete Slabs Reinforced with Stainless Steel Bars. Advances in Materials Science and Engineering, 2018. https://doi.org/10.1155/2018/5451398
- Zou, P. X. W. (2003). Flexural behavior and deformability of fiber reinforced polymer prestressed concrete beams. Journal of Composites for Construction, 7(4), 275–284.