References
- Al-Kharat, R., & Rogers, C. A. (2019). Experimental investigation of strengthened screw connection and application in cold formed steel shear walls. Thin-Walled Structures, 141, 539–552. https://doi.org/10.1016/j.tws.2019.05.004
- Alshamsi, G. (2022, October). Experimental & numerical investigation of an innovative, high capacity cold formed steel shear wall [Conference presentation]. Cold-Formed Steel Research Consortium (CFSRC) Colloquium, St. Louis, MO, United States.
- Ahmed, M. A., Jaber, H. T., & Al-Haydary, M. M. (2024). The effectiveness of innovative systems technologies in smart building structures. Civil and Environmental Engineering, 20(1), 194–203. https://doi.org/10.2478/cee-2024-0016
- American Institute of Steel Construction (AISC). (2022). Specification for structural steel buildings. Chicago, IL: American Institute of Steel Construction.
- American Iron and Steel Institute. (2016). North American specification for the design of cold-formed steel structural members (AISI S100-16). Washington, DC: American Iron and Steel Institute.
- American Iron and Steel Institute. (2020). North American standard for seismic design of cold-formed steel structural systems (AISI S400-20). Washington, DC: American Iron and Steel Institute.
- Attari, N. K. A., Alizadeh, S., & Hadidi, S. (2016). Investigation of CFS shear walls with one and two-sided steel sheeting. Journal of Constructional Steel Research, 122, 292–307. https://doi.org/10.1016/j.jcsr.2016.03.025
- ASTM International. (2006). Standard test methods and definitions for mechanical testing of steel products (ASTM A370-06). West Conshohocken, PA: ASTM International.
- Balh, N. (2010). Development of Canadian seismic design provisions for steel sheathed shear walls (Research Report RP10-1). American Iron and Steel Institute. https://scholarsmine.mst.edu/ccfss-aisi-spec/36
- Bitarafan, M., Hussein-Zadeh, Y., Pichkah, F., & Lale Arefi, S. (2012). Finite elements modeling and analysis of cold-formed steel frame shear walls. International Journal of Engineering and Technology, 4(6), 719–722.
- Borzoo, S., Ghaderi, S. R. M., Mohebi, S., & Rahimzadeh, A. (2016). Nonlinear finite element modeling of steel-sheathed cold-formed steel shear walls. Steel and Composite Structures, 22(1), 79–89. https://doi.org/10.12989/scs.2016.22.1.079
- Canadian Standards Association. (2020). North American specification for the design of cold-formed steel structural members (CSA S136-20). Mississauga, Canada: Canadian Standards Association.
- DaBreo, J., Balh, N., Ong-Tone, C., & Rogers, C. A. (2014). Steel sheathed cold-formed steel framed shear walls subjected to lateral and gravity loading. Thin-Walled Structures, 74, 232–245. https://doi.org/10.1016/j.tws.2013.10.006
- Dassault Systèmes. (2009). ABAQUS/Standard version 6.9-2 [Computer software]. Providence, RI: Dassault Systèmes.
- Esmaeili Niari, S., Rafezy, B., & Abedi, K. (2015). Seismic behavior of steel sheathed cold-formed steel shear wall: Experimental investigation and numerical modeling. Thin-Walled Structures, 96, 337–347. https://doi.org/10.1016/j.tws.2015.08.024
- European Convention for Constructional Steelwork (ECCS). (2009). The testing of connections with mechanical fasteners in steel sheeting and sections (2nd ed., ECCS TC7 TWG 7.10). Brussels, Belgium: ECCS.
- Hatami, S., & Gholikhani, M. (2017). Lateral behavior of cold formed steel framed shear walls with steel sheet sheathing using FE method. Journal of Materials and Engineering Structures, 4(4), 393–402. https://doi.org/10.22075/jme.2017.1709.1091
- Javaheri-Tafti, M. R., Ronagh, H. R., Behnamfar, F., & Memarzadeh, P. (2014). An experimental investigation on the seismic behavior of cold-formed steel walls sheathed by thin steel plates. Thin-Walled Structures, 80, 66–79. https://doi.org/10.1016/j.tws.2014.02.018
- Kechidi, S., & Iuorio, O. (2022). Numerical investigation into the performance of cold formed steel framed shear walls with openings under in-plane lateral loads. Thin-Walled Structures, 175, Article 109136.
- Koutilya, B., & Narayan, S. (2023). Numerical investigation of steel sheathed cold-formed steel shear wall under cyclic loading using ABAQUS. In Lecture Notes in Civil Engineering (Vol. 330, pp. 55–65). Springer. https://doi.org/10.1007/978-981-99-1604-7_5
- Li, X., Xu, W., Zhang, H., Li, Y., & Chen, Z. (2024). Experimental and numerical investigation on the flexural–compression behavior of a novel prefabricated steel tube–concrete composite shear wall. Civil and Environmental Engineering, 20(2), 124–138. https://doi.org/10.2478/cee-2024-0012
- Martínez, J., & Xu, L. (2021). Experimental behavior of a full-scale housing section built with cold-formed steel shear wall panels under horizontal monotonic and cyclic loading. Applied Sciences, 11(22), Article 10934. https://doi.org/10.3390/app112210934
- Martinez, A. (2023). Behavior of bolted connections in CFS shear walls under lateral loads. Journal of Structural Engineering, 152(3), 04023091. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003439
- Mohebbi, S., Mirghaderi, R., Farahbod, F., & Bagheri Sabbagh, A. (2015). Experimental work on single and double-sided steel sheathed cold-formed steel shear walls for seismic actions. Thin-Walled Structures, 91, 50–62. https://doi.org/10.1016/j.tws.2015.02.007
- Medriosa, H., Zaidir, Z., Tanjung, J., & Maidiawati, M. (2024). An analytical model of walls with openings variation using the diagonal strut method. Civil and Environmental Engineering, 20(1), 137–147. https://doi.org/10.2478/cee-2024-0012
- Niari, S. E., Rafezy, B., & Abedi, K. (2012). Numerical modeling and finite element analysis of steel sheathed cold-formed steel shear walls. Conference Proceedings of the International Colloquium on Stability and Ductility of Steel Structures (SDSS 2012), 1–8.
- Nguyen, T., & Tran, H. (2023). Influence of connection geometry on CFS wall performance. Construction and Building Materials, 319, 124512. https://doi.org/10.1016/j.conbuildmat.2021.124512
- Nie, X. (2020). Investigation on the design method of shear strength and lateral stiffness of the cold formed steel shear wall. Mathematical Problems in Engineering, 2020, Article 8845717. https://doi.org/10.1155/2020/8845717
- Pehlivan, B. M. (2023). Experimental investigation of structural systems made of sheathed cold formed steel wall panels [Master’s thesis, Middle East Technical University]. METU Theses Archive.
- Rizk, R. (2018). Higher strength cold-formed steel framed / steel shear walls for mid-rise construction (Research Report RP17-4). American Iron and Steel Institute. Available from McGill University, Department of Civil Engineering and Applied Mechanics.
- Rizk, R., Briere, V., Santos, V., & Rogers, C. (2018). Performance of cold-formed steel shear walls with frame blocking and double-sheathing. In Proceedings of the 24th International Conference on Cold-Formed Steel Structures (24ICCFFS), Missouri University of Science and Technology. https://scholarsmine.mst.edu/isccss/24iccfss/session9/6
- Rouaz, I., Bourahla, N., & Kechidi, S. (2018). Numerical evaluation of shear strength of CFS shear wall panels for different height-to-width ratios. Journal of Materials and Engineering Structures, 5, 51–60.
- Usefi, N., Ronagh, H. R., Kildashti, K., & Samali, B. (2018). Macro/micro analysis of cold-formed steel members using ABAQUS and OpenSees. Retrieved from https://www.researchgate.net/publication/322950842
- Xie, Z., Bi, Y., Fan, Y., Gao, C., Zhang, X., Feng, Y., Zhou, D., & Dong, L. (2024). Finite element investigation of a novel cold formed steel shear wall. Buildings, 14(6), Article 1691. https://doi.org/10.3390/buildings14061691
- Xie, Z., Yan, W., Yu, C., Mu, T., & Song, L. (2018). Experimental investigation of cold-formed steel shear walls with self-piercing riveted connections. Thin-Walled Structures, 131, 1–15. https://doi.org/10.1016/j.tws.2018.06.028
- Yu, C. (2010). Shear resistance of cold-formed steel framed shear walls with 0.686 mm, 0.762 mm, and 0.838 mm steel sheet sheathing. Engineering Structures, 32(6), 1522–1529. https://doi.org/10.1016/j.engstruct.2010.01.029
- Yu, C., & Chen, Y. (2009). Steel sheet sheathing options for cold-formed steel framed shear wall assemblies providing shear resistance – Phase 2 (Research Report RP09-2). American Iron and Steel Institute. https://scholarsmine.mst.edu/ccfss-aisi-spec/114
- Yu, C., & Chen, Y. (2011). Detailing recommendations for 1.83 m wide cold-formed steel shear walls with steel sheathing. Journal of Constructional Steel Research, 67(1), 93–101. https://doi.org/10.1016/j.jcsr.2010.07.009
- Yu, C., Vora, H., Dainard, T., Tucker, J., & Veetvkuri, P. (2007). Steel sheet sheathing options for cold-formed steel framed shear wall assemblies providing shear resistance (Research Report RP07-3). American Iron and Steel Institute. https://scholarsmine.mst.edu/ccfss-aisi-spec/33
- Zeynalian, M. (2012). Numerical study on seismic performance of cold-formed steel sheathed shear walls. Conference Proceedings of the International Conference on Steel Structures, 1–8.
- Zeynalian, M. (2017). Structural performance of cold-formed steel-sheathed shear walls under cyclic loads. Australian Journal of Structural Engineering, 18(2), 113–124. https://doi.org/10.1080/13287982.2017.1349533
- Zeynalian, M., Hamid, D., & Ronagh, R. (2012). Seismic performance of steel sheathed cold-formed steel shear walls. In Proceedings of the 21st International Conference on Cold-Formed Steel Structures (21ICCFFS), Missouri University of Science and Technology. https://scholarsmine.mst.edu/isccss/21iccfss-session10/3
- Zhang, A., Xie, Z., Shi, L., Zhang, Y., Zhou, D., & Zhang, X. (2022). Research on the simplified method of nonlinear finite element analysis for CFS-SPR connections. Buildings, 12(11), Article 1795. https://doi.org/10.3390/buildings12111925
- Zhang, Z., & Schafer, B. W. (2019). Simulation of steel sheet sheathed cold-formed steel framed shear walls. Proceedings of the Annual Stability Conference, Structural Stability Research Council (SSRC), 1–10.
- Zhang, Z., Eladly, M. M., Rogers, C. A., & Schafer, B. W. (2024). Cold-formed steel framed shear wall test database. Earthquake Spectra, 40(1), 871–884. https://doi.org/10.1177/87552930231202974