References
- AFNOR. (n.d.). NF P 98-250-1 – Hydrocarbon binders – Determination of rheological characteristics using a dynamic shear rheometer (DSR) – Part 1: Test method. Association Française de Normalisation.
- Aldagari, S., Kabir, S. F., & Fini, E. H. (2022). Functionalized waste plastic granules to enhance sustainability of bituminous composites. Construction and Building Materials, 320, 126234. https://doi.org/10.1016/j.conbuildmat.2021.126234
- Arabani, M., Tahami, S., & Hamedi, G. (2018). Performance evaluation of dry process crumb rubber-modified asphalt mixtures with nanomaterial. Road Materials and Pavement Design, 19, 1241–1258. https://doi.org/10.1080/14680629.2017.1302356
- Bueno, B. S., & Teixeira, A. R. (2024). Use of recycled plastics in asphalt mixtures: A bibliometric and systematic review. Civil and Environmental Engineering, 20(1), 15–28. https://doi.org/10.2478/cee-2024-0002
- Dalhat, M. A., & Al-Abdul Wahhab, H. I. (2015). Performance of recycled plastic waste modified asphalt binder in Saudi Arabia. International Journal of Pavement Research and Technology, 8(4), 251–260. https://doi.org/10.6135/ijprt.org.tw/2015.8(4).251
- European Committee for Standardization. (2018). EN 12697-26: Bituminous mixtures – Test methods for hot mix asphalt – Part 26: Stiffness. CEN
- European Committee for Standardization. (2020). EN 12697-22: Bituminous mixtures – Test methods – Part 22: Wheel tracking. CEN
- Ibrahim, H., Mohamed, A., & El-Sayed, K. (2024). Performance evaluation of polyethylene-modified hot mix asphalt using dynamic mechanical analysis. Civil and Environmental Engineering, 20(2), 55–66. https://doi.org/10.2478/cee-2024-0010
- Jiang, J., Leng, Z., Lan, J., Chen, R., & Yao, L. (2022). Environmental and economic assessment of collective recycling of waste plastic and reclaimed asphalt pavement into pavement construction: A case study in Hong Kong. Journal of Cleaner Production, 361, 130405. https://doi.org/10.1016/j.jclepro.2022.130405
- Leng, Z., Padhan, R. K., & Sreeram, A. (2021). Valorization of waste plastics in asphalt mixtures: A review. Construction and Building Materials, 290, 123225. https://doi.org/10.1016/j.conbuildmat.2021.123225
- Lu, X., & Isacsson, U. (1997). Chemical and rheological evaluation of ageing properties of SBS polymer modified bitumens. Fuel, 76(12), 1125–1132. https://doi.org/10.1016/S0016-2361(97)00110-1
- Manjunatha, M., Seth, D., Balaji, K. V. G. D., & A., B. (2022). Engineering properties and environmental impact assessment of green concrete prepared with PVC waste powder: A step towards a sustainable approach. Case Studies in Construction Materials, 17, e01404. https://doi.org/10.1016/j.cscm.2022.e01404
- Michel, Q., Orozco, G., & Carter, A. (2023). Influences of type and concentration of recycled mineral construction, renovation, and demolition waste on the linear viscoelastic behavior of bituminous mastics. Construction and Building Materials, 365, 130065. https://doi.org/10.1016/j.conbuildmat.2022.130065
- Movilla-Quesada, D., Raposeiras, A. C., Silva-Klein, L., Lastra-González, P., & Castro-Fresno, D. (2021). Use of plastic scrap in asphalt mixtures added by dry method as a partial aggregate replacement. Waste Management, 120, 112–121. https://doi.org/10.1016/j.wasman.2020.11.019
- OECD. (2022). Global plastics outlook: Policy scenarios to 2060. OECD Publishing. https://doi.org/10.1787/aa1edf33-en
- Radeef, H., Hassan, A., Abidin, A., Mahmud, M., Yusoffa, N., Satar, M., & Warid, M. (2021). Enhanced dry process method for modified asphalt containing plastic waste. Frontiers in Materials, 8, 700231. https://doi.org/10.3389/fmats.2021.700231
- Rahman, M. N., Ahmeduzzaman, M., Sobhan, M. A., & Ahmed, T. U. (2013). Performance evaluation of waste polyethylene and PVC on hot asphalt mixtures. American Journal of Civil Engineering and Architecture, 1(5), 97–102. https://doi.org/10.12691/ajcea-1-5-2
- Read, J., & Whiteoak, D. (2003). The Shell bitumen handbook (5th ed.). Thomas Telford.
- Santos, J., Pham, A., Stasinopoulos, P., & Giustozzi, F. (2022). Recycling waste plastics in roads: A life-cycle assessment of recycled plastic-modified asphalt. Journal of Cleaner Production, 377, 134536. https://doi.org/10.1016/j.jclepro.2022.134536
- Singh, R., & Gupta, P. (2024). Sustainable road pavements using waste plastics: Mechanical and environmental assessment. Civil and Environmental Engineering, 20(3), 101–115. https://doi.org/10.2478/cee-2024-0015
- Williams, M. L., Landel, R. F., & Ferry, J. D. (1955). The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. Journal of the American Chemical Society, 77(14), 3701–3707. https://doi.org/10.1021/ja01619a008
- Yin, F., Bahia, H., et al. (2015). Fundamentals of asphalt binder rheology. NCHRP Report 804. Transportation Research Board.
- Zhou, H., Zhang, Y., Zhang, M., Jiang, X., Xiao, R., Polaczyk, P., & Huang, B. (2021). The utilization of waste plastics in asphalt pavements: A review. Cleaner Materials, 2, 100031. https://doi.org/10.1016/j.clema.2021.100031