References
- Baguinho, F., Biscaya, A., Pedro, J. O. (2022). The Reduced Stress Method with stress shedding for designing S690 high strength steel slender plated girders. Ce/papers, 5(4), 667–674. DOI: 10.1002/cepa.1805
- EN 1995-1-5: Eurocode 3: Design of steel structures - Part 1-5: General rules - Plated structural elements. CEN, Brussels, 2004.
- EN 1990: Eurocode: Basis of structural design. CEN, Brussels, 2002.
- EN 1991-2: Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges. CEN, Brussels, 2003.
- Hobst L. et al. (1999). Temporary bridges for transport construction (Provizoria dopravních staveb). ČKAIT, Czechia. (in Czech).
- Ižvolt, L., Dobeš, P., Mečár, M. (2023). Diagnostics of the Deformation Resistance of the Track Bed in the Inter -Station Section Palárikovo - Nové Zámky - Track No. 1. Civil and Environmental Engineering, 19(1), 280-287. DOI: 10.2478/cee-2023-0025
- Johansson, B., Maquoi, R., Sedlacek, G., Müller, C., Beg. D. (2007). Commentary and worked examples to EN 1993-1-5 “plated structural elements” First edition. Scientific and Technical Research Reports, EUR 22898 EN, Luxembourg, OPOCE. (online)
- Koteš, P., Vičan, J. (2012). Reliability levels for existing bridges evaluation according to Eurocodes. Procedia Engineering, 40, 211–216. DOI: 10.1016/j.proeng.2012.07.082
- Odrobiňák, J., Farbák, M., Prokop, J., Vičan, J., Vavák, B. (2023). Analysis of the impact of the ribbon track on unconventional fixing on a steel multi-span bridge. Ce/papers, 6(5), 1198–1207. DOI: 10.1002/cepa.2133
- Samvin, D., Skoglund. O. (2016). Design of slender steel members – A comparison between the reduced stress method and the effective width method. Dissertation, KTH Royal Institute of Technology, Stockholm. (online)
- Schafer, B.W. (2008). Review the Direct Strength Method of cold-formed steel member design. Journal of Constructional Steel Research, 64, 766–778. DOI: 10.1016/j.jcsr.2008.01.022
- Slovak Railways. (2016). Determination of the load capacity of railway bridge structures. Guideline, (Vičan et al.), Slovakia. (in Slovak).
- Szabo, I.F., Ungureanu, V., Dubina, D. (2004). Recent research advances on ECBL approach. Part II: Interactive buckling of perforated sections. Thin-Walled Structures, 42 (2), 195–210. DOI: 10.1016/S0263-8231(03)00057-0
- Tawfeeq, A.A, Popa, N. (2021). The reduced stress method (EN-1993-1-5) in designing of the plated structural elements. IOP Conference Series, 664(1), 012067. DOI: 10.1088/1755-1315/664/1/012067
- Vaszilievits-Sömjén, B. (2021). Efficient application of the Reduced Stress Method for built-up I sections. Proceedings of the 8th International Conference CIMS 2021, Lodz, Poland, 9 p. DOI: 10.2139/ssrn.3868169
- Vičan, J., Odrobiňák, J., Koteš, P. (2016). Determination of Load-Carrying Capacity of Railway Steel and Concrete Composite Bridges. Key Engineering Materials, 691, 172–184. DOI: 10.4028/www.scientific.net/KEM.691.172