References
- DUN, X.: An Experimental and Computational Investigation of Secondary Bending in Double Layer Gridshell Assemblies, University of Limerick, School of Engineering, Master Thesis, Limerick, 2023, 204 pp.
- GERE, J.M. – TIMOSHENKO, S.: Mechanics of Materials, 4th ed., Boston, MA: PWS. 1997.
- ASHBY, M.F.: Materials selection in mechanical design, Pergamon Press: London, ISBN 0 7506 6168 2, London, 2005, 662 pp https://ftp.idu.ac.id/wp-content/uploads/ebook/tdg/TEKNOLOGI%20REKAYASA%20MATERIAL%20PERTAHANAN/Materials%20selection%20textbook.pdf
- LIENHARD, J. – ALPERMANN, H. – GENGNAGEL, C. – KNIPPPERS, J.: Active bending, a review on structures where bending is used as a self-formation process, In: International Journal of Space Structures, 28(3-4), 2013, 187-196 pp. https://doi.org/10.1260/0266-3511.28.3-4.187
- GENGNAGEL, CH. – BÄUMER, R. – HERNÁNDEZ, E.: Natural – fibre – reinforced plastic in actively bent structures, In: Construction Materials, ISSN 1747-650X, 2013, 365-377 pp. https://doi.org/10.1680/coma.12.00026
- TIMOSHENKO, S.P.: Strength of Materials, Part II: Advanced theory and problems, 2 ed., D. Van Nostrand Company, 1948. https://civiltechnicalguruji.wordpress.com/wp-content/uploads/2018/07/strength-of-materials-parts-i-ii.pdf
- YOUNG, C.W. – BUDYNAS, G. R.: Roark´s Formulas for Stress and Strain, A division of The McGraw-Hill Companies, United States of America, ISBN 0-07-072542-X, 2002, 854 pp https://jackson.engr.tamu.edu/wp-content/uploads/sites/229/2023/03/Roarks-formulas-for-stress-and-strain.pdf
- TIMOSHENKO, S. P.: History of Strength of Materials. McGraw-Hill, New York, U.S.A. 1953. 231 pp. https://fst.univ-biskra.dz/images/docs/Stephen%20P%20Timoshenko-History%20of%20Strength%20of%20Materials-Dover%20Publications%20(1983).pdf
- BORESI, A.P. – Schmidt, R.J. – Sidebottom, O.M.: Advanced mechanics of materials, ISBN 0-471-55157-0, 827pp., United States of America, 1993.
- EN 10002-1: Metallic materials – Tensile testing – Part 1: Method of test at ambient temperature, European standard, 1990. 57 pp.
- ISO 7438: Metallic materials – Bend test, International Standard, 2016-9 pp
- SONAVANE. T.: Analysis of Arches, Department of Civil, Enviromental and Architectural Engineering, Master Thesis, 2014. 160 pp. https://ceae.colorado.edu/~saouma/wp-content/uploads/pdf-files/Arches-Trupti.100eca1e.pdf
- HAPPOLD, E. – LIDDELL, W.I.: Timber lattice roof for the Mannheim Bundesgartenschau, In: The Institution of Structural Engineers, 1975. https://www.istructe.org/journal/volumes/volume-53-(published-in-1975)/issue-3/timber-lattice-roof-for-the-mannheim-bundesgartens/
- HARRIS, R. – HASKINS, S. – ROYNON, J.: The Savill Garden gridshell: design and construction, In: The Structural Engineer 86(17),, 2008, 27-34 pp. https://www.researchgate.net/publication/279585750_The_Savill_Garden_Gridshell_Design_and_Construction
- ROMER, J. – KELLY, O. – JOHNSON., S.: Design and construction of the Downland Gridshell, In: Building Research & Information 31(6), 2003, 427-454 pp. https://doi.org/10.1080/0961321032000088007
- HERDA, R. – SLIVANSKÝ, M. – SANDANUS, J.: Modeling of active bending by the method Newton-Raphson and the modified Newton-Raphson, In: Civil and Environmental Engineering, 2024, 862-870 pp. https://doi.org/10.2478/cee-2024-0063
- HAMED, Z.R. – HASSAN, F.H: Structural behavior of GFRP - RC slender columns under various eccentricity loading conditions, In: Civil and Environmental Engineering, 2023, 1-16 pp. https://doi.org/10.2478/cee-2023-0001