References
- MAYS, G. C. - BARNES, R.: Performance of lightweight aggregate concrete structures in service, Struct. Eng., vol. 69, pp. 351–361, 1991.
- MANGURIU, N. - MUTKU, G. N. - RAPHAEL, O. - WALTER, O. - SILVESTRE, O. A.: Properties of pumice lightweight aggregate, Civil and Environmental Research, vol. 2, iss. 10, pp. 58–67, 2012.
- LI, J. jun - WAN, C. jun - NIU, J. gang - WU, L. feng - WU, Y. chao: Investigation on flexural toughness evaluation method of steel fiber reinforced lightweight aggregate concrete, Construction and Building Materials, 2017.
- MUFEED ABD-AL-GHAFOOR, L. - HARBA, I. S. I.: Behavior of lightweight aggregate wide reinforced concrete beams with shear steel plates under repeated loading, Civil and Environmental Engineering, vol. 20, iss. 1, pp. 555–570, 2024, DOI: 10.2478/cee-2024-0042.
- KUMAR, A. D. - POLURAJU, P. - KASAGANI, H.: Experimental investigation on mechanical properties of lightweight aggregate concrete, Civil and Environmental Engineering, vol. 18, iss. 2, pp. 666–677, DOI: 10.2478/cee-2022-0061.
- MIRZAEI, Y.: Post-punching behavior of reinforced concrete slabs, EPFL, 2010.
- AMERICAN CONCRETE INSTITUTE [ACI] (2014b): Guide for structural lightweight-aggregate concrete (ACI 213R-14), Farmington Hills, MI: American Concrete Institute.
- LI, J. - ZHAO, E. - NIU, J. - WAN, C.: Study on mixture design method and mechanical properties of steel fiber reinforced self-compacting lightweight aggregate concrete, Constr. Build. Mater., vol. 267, p. 121019, 2021.
- HAMOUSH, S. - ABU-LEBDEH, T. - CUMMINS, T.: Deflection behavior of concrete beams reinforced with PVA micro-fibers, Constr. Build. Mater., vol. 24, no. 11, pp. 2285–2293, 2010.
- HSIE, M. - TU, C. - SONG, P. S.: Mechanical properties of polypropylene hybrid fiber-reinforced concrete, Mater. Sci. Eng. A, vol. 494, no. 1–2, pp. 153–157, 2008, doi: 10.1016/j.msea.2008.05.037.
- AHMED, H. K. - KHALIL, W. I. - SUBHI, M. D.: Mechanical properties of fiberous high performance lightweight aggregate concrete, Eng. Technol. J., vol. 35, no. 3, pp. 229–238, 2017, doi: 10.30684/etj.35.3a.7.
- YANG, K. H. - KIM, H. Y. - LEE, H. J.: Mechanical properties of lightweight aggregate concrete reinforced with various steel fibers, Int. J. Concr. Struct. Mater., vol. 16, no. 1, 2022, doi: 10.1186/s40069-022-00538-4.
- ISSA, A. S. - AL-ASADI, A. K.: Mechanical properties of lightweight expanded clay aggregate (Leca) concrete, Sci. Rev. Eng. Environ. Sci., vol. 31, no. 3, pp. 161–175, 2022, doi: 10.22630/srees.3150.
- ZAEZUE, S. J. - HADI, W. K.: Influence of hybrid steel–polypropylene fibers on the mechanical properties of normal concrete, Univ. Thi-Qar J. Eng. Sci., vol. 13, no. 1, pp. 34–39, 2023.
- ASTM INTERNATIONAL [ASTM] (2021): Standard specification for portland cement (ASTM C150/C150M-21), West Conshohocken, PA: ASTM International.
- AL-KHAFAJI, N. H. A. - HARBA, I. S. I.: Shear and flexural behavior of lightweight concrete beams containing hybrid fibers, Civil and Environmental Engineering, vol. 19, iss. 1, pp. 206–217, DOI: 10.2478/cee-2023-0018.
- ASTM INTERNATIONAL [ASTM] (2019): Standard specification for chemical admixtures for concrete (ASTM C494/C494M-19), West Conshohocken, PA: ASTM International.
- ASTM INTERNATIONAL [ASTM] (2013): Standard specification for concrete aggregates (ASTM C33/C33M-13), West Conshohocken, PA: ASTM International.
- ASTM INTERNATIONAL [ASTM] (2005): Standard specification for silica fume used in cementitious mixtures (ASTM C1240-05), West Conshohocken, PA: ASTM International.