Effect of Alternating Hybridisation of Fibres on the Physico - Mechanical Behaviour of Composite Materials
References
- BERTHOLOT, J. M.: Composite materials,mechanical behavior and analysis of structures. 5th edition Lavoisier, Paris, 2012.
- GAY, D.: Composite materials. Edition LAVOISIER, Paris, 2005.
- Glossary of composite materials. Regional animation center for advanced materials, C.A.R.M.A. 2006.
- HARRIS, B.: Fatigue in composites: sciences and technology of the fatigue respense of fiber reinforced plastics. Edition B. Harris, University of Bath, UK, 1983.
- KAWAI, M. – MORISHITA, M. – FUZI, K. – SAKURAI, T.: Effect of matrix ductility and progressive damage on fatigue strength of unnotched and notched carbon fibre plain woven roving laminates. Compos Part A, 27, 1996, pp. 493–502.
- QAIS, J. - FRAYYEH MUSHTAQ, H. – KAMIL: The effect of adding fibers on dry shrinkage of geopolymer concrete. Civil Engineering Journal, Vol. 7, No. 12, 2021.
- LAYTH, A. AL-JABERI - ZINAH WALEED ABBAS - OSAMAH M. AL-KERTTANI - MAZIN M. SARHAN: Flexural behavior of geopolymer mortar-reinforced fiberglass textile panels. Civil and Environmental Engineering, Vol. 18, Iss. 1, 2022, pp. 280-291, doi: 10.2478/cee-2022-0026.
- JIN ZHANG - KHUNLAVIT CHAISOMBAT - SHUAI HE - CHUN H. Wang: Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures. Materials and Design, Vol. 36, 2012, pp. 75–80.
- KIN, L. – SCHULTHEISZ, C. R. – HUNSTON, D. L. – BRINSON, L. C.: Long-term durability of fibre-reinforced polymer-matrix composite materials for infrastructure applications a review. J Adv Mater, 30, 1998, pp. 3–30.
- CHAFRA – CHEVALIER: Oriented damage and failure of composite materials under cyclic loading. XV French mechanical congress, 3-7 Sept., Nancy, 2001.
- HALIMI, R. – BEZZAZI, B. – BADIDIBOUDA, A. M. - Djelloul Abbou - Mimouni, O.: Study and analysis of mechanical and viscoelastic behavior in flexure of laminated composites. International journal of material research, Vol. 107, No.1, 2016, pp. 78-87.
- HALIMI, R.: PhD thesis’study of the damage behavior of laminated composite materials. University Boumerdes, Algeria, 2018.
- BOURBAN, P. E. – CAELSON, L. – MERCIER, J. P. – EMANSON, J. A. : Composite materials with organic matrix. 1st edition, Polytechnical and university Romandes, CH-1015, Lausanne, 2004.
- AFNOR NF T 57-105: Reinforced plastics - Determination of bending characteristics.
- ISO 178: Plastics - Determination of bending properties.
- NF EN ISO 527-4: Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fiber reinforced plastic composites.
- ASTMD 790: Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials.
- NF T 57-102: Measurement of the fiber content with the calcination test.
- ISO 1183-1: Plastics - Methods for determining the density of non-cellular plastics.
- MANDERS, P. W.: PhD thesis. The strength of mixed fibre composites. University of Surrey, 1979.
- KRETSIS, G.: A review of the tensile, compressive, flexural and shear properties of hybrid fibre-reinforced plastics. Composites, 18, 1987, pp. 13–23.
- NAIK, N. K. – RAMASIMHA, R. – ARYA, H. – PRABHU, S. V. – SHAMARAO, N.: Impact response and damage tolerance characteristics of glass–carbon/epoxy hybrid composite plates. Composites Part B, 32(7), 2001, pp. 565–74.
- BEZZAZI, A. R. - El MAHI, A. – BERTHOLOT, J. M. – BEZZAZI, B.: Flexural fatigue behavior of cross-plate laminates: an experimental approach. Strength of Materials, Vol. 35, No 2, 2003, pp. 149-161.
Language: English
Page range: 406 - 413
Published on: May 12, 2023
Published by: University of Žilina
In partnership with: Paradigm Publishing Services
Publication frequency: 2 times per year
Keywords:
Related subjects:
© 2023 Noura Harb, Hamid Dilmi, Boudjema Bezzazi, Kahina Hamitouche, published by University of Žilina
This work is licensed under the Creative Commons Attribution 4.0 License.