References
- [1] ZHANG, B. - YU, J. - CHEN, W. - WANG, H. – XU, J.: Stress states and shear failure mechanisms of girders with corrugated steel webs. Thin Walled Struct., Vol. 157, 2020, 14 p.10.1016/j.tws.2020.106858
- [2] PAPANGELIS, J. - TRAHAIR, N. - HANCOCK, G.: Direct strength method for shear capacity of beams with corrugated webs. J Constr Steel Res., Vol. 137, 2017, pp. 152–160.10.1016/j.jcsr.2017.06.007
- [3] JAE-YUEL O. - DEUCK HANG LEE - KANG SU KIM: Accordion effect of prestressed steel beams with corrugated webs. Thin-Walled Structures, Vol. 57, 2012, pp. 49–61.10.1016/j.tws.2012.04.005
- [4] ZUBKOV, V. - LUKIN, A. - ALPATOV, V.: Experimental research of beams with corrugated web. MATEC Web of Conferences Vol. 196, 2018, 6 p.10.1051/matecconf/201819601005
- [5] CAO, Q. I. - JIANG, H. - WANG, H.: Shear behavior of corrugated steel webs in h shape bridge girders. Math Probl Eng., Vol. 2015, 2015, 15 p., https://doi.org/10.1155/2015/796786.
- [6] SADEEK, A. B. - TOHAMY, S. - MOHAMED, O. - IBRAHIM, A.: Behavior of plate girder with corrugated steel web subjected to shear loading. International Conference on Advances in Structural and Geotechnical Engineering, ICASGE 2015.
- [7] SAYED-AHMED, E. Y.: Design aspects of steel I-girders with corrugated steel webs. Electron J Struct Eng., Vol. 7. 2007, pp. 27-40.10.56748/ejse.772
- [8] SACHIN, K. G. - SOWJANYA G. V. – MURALIDHAR, N.: Behaviour of Plate Girder with Flat Web and Corrugated Web. Int. J. Struct., Vol. 2, Iss. 1, 2014, pp. 130–136.
- [9] HASSANEIN, M. F.: Shear strength of tubular flange plate girders with square web openings. Eng Struct., Vol. 58, 2014, pp. 92–104.10.1016/j.engstruct.2013.10.009
- [10] LINDNER, J. - HUANG, B.: Progress in the analysis of beams with trapezoidally corrugated webs. The 17th Czech and Slovak Intern. Conference on Steel Structures and Bridges, 1994, pp. 151–156.
- [11] ROMEIJN, A. - SARKHOSH, R. - HOOP, H.: Basic parametric study on corrugated web girders with cut outs. J Constr Steel Res., Vol. 65, 2009, pp. 395–407.10.1016/j.jcsr.2008.02.006
- [12] ADEL H. SALEM - MOHAMED A. EL AGHOURY - AHMED A. MATLOUB: Elastic Buckling Of Corrugated Webs with Openings. Twelfth International Colloquium on Structural and Geotechnical Engineering, 2007.
- [13] KUDRYAVTSEV, S.: Influence of web openings on bearing capacity of triangularly corrugated web beam. IOP Conf S Mater Sci Eng., Vol. 365, 2018, 9 p.10.1088/1757-899X/365/4/042034
- [14] ADEWOLE KAZEEM KAYODE, LEOPOLD MBEREYAHO: Finite Element Analysis of Double -Bolt Shear-Out Fracture Failure. Civil and Environmental Engineering, Vol. 16, Iss. 2, 2020, pp. 219-228, DOI: 10.2478/cee-2020-0021.
- [15] NARAYANAN, R.: Ultimate shear capacity of plate girder with openings in web. Plated steel structures, stability and strength, Chapter 2, 1983, pp. 39–76,
- [16] H. TALAAT ABDEL-LATEEF: Buckling of rectangular steel plates with holes. Bulletin of the Faculty of Engineering, Minia University, Vol. 12, 1993.
- [17] SAMADHAN G. MORKHADE - LAXMIKANT M. GUPTA: An experimental and parametric study on steel beams with web openings. Int J Adv Struct Eng., Vol. 7, 2015,pp. 249–260.10.1007/s40091-015-0095-4
- [18] KIYMAZ, G. - COSKUN, E. - COSGUN, C. - SECKIN, E. Transverse load carrying capacity of sinusoidally corrugated steel web beams with web openings Steel Compos Struct., Vol. 10, Iss. 1, 2010, pp. 69–85.10.12989/scs.2010.10.1.069
- [19] HISHAM GOMAA KOTB, Shear Buckling Behavior of Plate Girder with Corrugated Webs. Master Thesis. Minia University, 2016.
- [20] ANSYS Release 2020 R1, Inc., Canonsburg, 2020.