References
- [1] DROESCH, D. D.: Bonded Anchors in Concrete under Sustained Loading. M.Sc. Thesis, University of Massachusetts Amherst, USA, July 2015.
- [2] TAYEH, B. A. – EL DADA, Z. M. – SHIHADA, S. – YUSUF, M. O.: Pull-Out Behavior of Post Installed Rebar Connections Using Chemical Adhesives and Cement Based Binders. Journal of King Saud University, Engineering Sciences, 2017.
- [3] GONZÁLEZ, F. – FERNÁNDEZ, J. – AGRANATI, G. – VILLANUEVA, P.: Influence of Construction Conditions on Strength of Post Installed Bonded Anchors. Constr. Build. Mater, Vol. 165, 2018, pp. 272–283.10.1016/j.conbuildmat.2017.12.144
- [4] EPACKACHI, S. – ESMAILI, O. – MIRGHADERI, S. R. – BEHBAHANI, A. A. T.: Behavior of Adhesive Bonded Anchors under Tension and Shear Loads. Journal of Constructional Steel Research, Vol. 114, 2015, pp. 269–280.10.1016/j.jcsr.2015.07.022
- [5] ÇALISKAN, Ö. – ARAS, M.: Experimental Investigation of Behavior and Failure Modes of Chemical Anchorages Bonded to Concrete. Constr. Build. Mater, Vol. 156, 2017, pp. 362–375.10.1016/j.conbuildmat.2017.08.179
- [6] ASSAAD, J. J. – ISSA, C. A.: Bond Strength of Epoxy-Coated Bars in Underwater Concrete. Constr. Build. Mater, Vol. 30, 2012, pp. 667–674.10.1016/j.conbuildmat.2011.12.047
- [7] BRENCICH, A.: A Post-Installed Insert for Pull-Out Tests on Concrete up to 70 MPa. Constr. Build. Mater, Vol. 95, 2015, pp. 788–801.10.1016/j.conbuildmat.2015.07.055
- [8] ÇALIS KAN, Ö. – YILMAZ, S. – KAPLAN, H. – KIRAÇ, N.: Shear Strength of Epoxy Anchors Embedded into Low Strength Concrete. Constr. Build. Mater, Vol. 38, 2013, pp. 723–730.10.1016/j.conbuildmat.2012.09.020
- [9] COOK, R.: Behavior of Chemically Bonded Anchors. J. Struct. Eng., Vol. 119, Iss. 9, 1993, pp. 2744–2762.10.1061/(ASCE)0733-9445(1993)119:9(2744)
- [10] COOK, R. – KONZ, R.: Factors Influencing Bond Strength of Adhesive Anchors. Struct. J., Vol. 98, Iss. 1, 2001, pp. 76–86.10.14359/10149
- [11] ELIGEHAUSEN, R. – COOK, R. – APPL, J.: Behavior and Design of Adhesive Bonded Anchors. ACI Struct. J., Vol. 103, Iss. 6, p. 822.
- [12] FUJIKAKE, K. – NAKAYAMA, J. – SATO, H. – MINDESS, S. – ISHIBASHI, T.: Chemically Bonded Anchors Subjected to Rapid Pullout Loading. ACI Mater. J., Vol. 100, Iss. 3, 2003, pp. 246–252.10.14359/12626
- [13] GESOGLU, M. – ÖZTURAN, T. – ÖZEL, M. – GÜNEYISI, E.: Tensile Behavior of Post installed Anchors in Plain and Steel Fiber-Reinforced Normal-and High-Strength Concretes. ACI Struct. J., Vol. 102, Iss. 2, 2005, p. 224.10.14359/14273
- [14] KIM, J. – JUNG, W. – KWON, M. – JU, B.: Performance Evaluation of the Post-Installed anchor for Sign Structure in South Korea. Constr. Build. Mater, Vol. 44, 2013, pp. 496–506.10.1016/j.conbuildmat.2013.03.015
- [15] MAZILIGÜNEY, L.: Tensile Behavior of Chemically Bonded Post-Installed Anchors in Low Strength Reinforced Concretes. (MSc. Thesis). Middle East Technical University, pp. 28–33.
- [16] SHAH, A. – ALI, Q. – ALAM, B. – SHAHZADA, K. – KHAN, R. – AHMAD, N.: Study on Performance Evaluation of Adhesive Anchors in Concrete. Int. J. Adv. Struct. Geotech. Eng., Vol. 1, Iss. 2, 2012, pp. 74–78.
- [17] YILMAZ, S. – ÖZEN, M. – YARDIM, Y.: Tensile Behavior of Post-Installed Chemical Anchors Embedded to Low Strength Concrete. Constr. Build. Mater, Vol. 47, 2013, pp. 861–866.10.1016/j.conbuildmat.2013.05.032
- [18] KUT Epoxy Anchor. Product Data sheet: Epoxy Resin Based Anchoring Grouts. GAP-04-1110, Specialties Construction Chemicals Factory (ASPEC).
- [19] SIKAFLOOR-169, Product Data sheet: Part Epoxy Binder for Mortars, Screeds and Seal Coats, 2017.