References
- [1] UNDP, ETHIOPIA: Country Economic Brief, UNDP Ethiop. Policy Advis. Unit, no. 1, 2014,.pp. 1–15.
- [2] Asian Development Bank, Urbanization, and Sustainability in Asia: Case Studies of Good Practice, Adb, 2006, p. 516.
- [3] UNIDO, OCCASION, This publication has been made available to the public on the occasion of the 50. 2007.
- [4] KASTHURBA, A.K. - SANTHANAM, M. - MATHEWS, M. S.: Investigation of laterite stones for building purpose from Malabar region, Kerala state, SW India – Part 1: Field studies and profile characterization, Vol. 21, 2007, pp. 73–82.
- [5] RAHMAN, M.A.: The potentials of lateritic soil-Clay and clay-sand mixes in the manufacturing of bricks for masonry units. Build. Environ., Vol. 22, No. 4, 1987, pp. 325–330.
- [6] MUDI, M. - ALIYU, A.A.: An Examination of the Properties of Literate and Clay as Construction Materials for Sustainable Buildings in Kano and Kaduna Metropolis. Nigeria, July 2012, pp. 1–7.
- [7] ADAZABRA, A.N. - VIRUTHAGIRI, G. - SHANMUGAM, N.: An assessment on the sustainable production of construction clay bricks with spent shea waste as renewable ecological material. Vol. 1, No. 2, 2018.
- [8] LOZANO-MIRALLES, J.A. - HERMOSO-ORZÁEZ, M.J. - MARTÍNEZ-GARCÍA, C. - ROJAS-SOLA, J.I.: Comparative study on the environmental impact of traditional clay bricks mixed with organic waste using life cycle analysis, Sustain., Vol. 10, No. 8, 2018.
- [9] MARY, M.L. - PETER, C. - MOHAN, K. - GREENS, S.- GEORGE, S.: Energy-efficient production of clay bricks using industrial waste.Heliyon, Vol. 4, No. 10, 2018, p. e00891.
- [10] ZULTINIAR, A. - FADLI, S.R. –DRASTINAWATI, Y. - THARIQ, M.R.A.: Fabrication of brick without burning process.IOP Conf. Ser. Mater. Sci. Eng., Vol. 345, No. 1, 2018.
- [11] KARIYAWASAM, K.K.G.K.D.- JAYASINGHE, C.: Cement stabilized rammed earth as a sustainable construction material.Constr. Build. Mater., Vol. 105, 2016, pp. 519–527.
- [12] KAKALE, A.U.: Sustainable Environment: Lateriteas Sustainable.No. 2, 2016, pp. 70–73.
- [13] GALLEN, S.: SKAT Swiss Centre for Development Cooperation in Technology and Management. 1993.
- [14] AKADIRI, P.O. - CHINYIO, E.A. - OLOMOLAIYE, P.O.: Design of a Sustainable Building: A Conceptual Framework for Implementing Sustainability in the Building Sector. 2012, pp. 126–152.
- [15] BAYIZITLIOĞLU, B.: The Historic Environment: Policy & Practice Conservation and Maintenance of Earth Constructions: Yesterday and Today Conservation and Maintenance of Earth Constructions: Yesterday and Today.Hist. Environ. Policy Pract., Vol. 7505, December 2017, pp. 1–32.
- [16] DEBOUCHA, S.- HASHIM, R.: Correlation between total water absorption and wet compressive strength of compressed stabilized peat bricks.Vol. 6, No. 10, 2011, pp. 2432–2438.
- [17] GETACHEW, K.- MOSISA, A.: Laboratory Investigation of Locally Produced Clay Brick Quality and Suitability for Load Bearing Element in Jimma Area. Ethiopia Alemu Mosisa, Int. J. Eng. Res. Technol., Vol. 6, No. 5, 2017, pp. 809–817.
- [18] IS-1077, Common Burnt Clay Building Bricks -Specification, Bur. Indian Stand., 2007.
- [19] ASTM C67-90, Standard test method for the properties of fired clay bricks, Annual Book of American Society for Testing and Materials, 1996.
- [20] Ethiopian Standards Agency (ESA). Solid clay bricks, ES 86:2001, Ethiopian Standard, Second edition 2001-06-27, 2011.