References
- Ahmad M.N., Ishak M.R., Mohammad Taha M., Mustapha F., Leman Z., Anak Lukista D.D., Irianto Ghazali I., Application of Taguchi method to optimize the parameter of fused deposition modeling (FDM) using oil palm fiber reinforced thermoplastic composites, Polymers, 14(11), 2140 (2022), DOI: 10.3390/polym14112140.
- Alzahrani F.J., Patel S., Lee J., An Investigation of the Effect of Layer‑Building Time on the Interlayer Adhesion Strength in Polymer Additive Manufacturing, ASME IMECE, 2024.
- Ali D.A., Huayier A.F., Enzi A., Parametric prediction of FDM process to improve tensile properties using Taguchi method and artificial neural network, Advances in Science and Technology Research Journal, 17(4), 130-138 (2023), DOI: 10.12913/22998624/169340.
- Chacon J.M., Caminero M.Á., García‑Plaza E., Núñez‑López P.J., Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection, Materials & Design, 131, 68-83 (2017), DOI: 10.1016/j.matdes.2017.06.005.
- Chin Ang K., Fai Leong K., Kai Chua C., Chandrasekaran M., Investigation of the mechanical properties and porosity relationships in fused deposition modelling‐ fabricated porous structures, Rapid Prototyping Journal, 12(2), 100-105 (2006).
- Ermolai V., Sover A., Nagîț G., Boca M.A., Irimia A.I., Influence of Fused Filament Fabrication Raster Parameters over the Top Surface Topography, Acta Technica Napocensis-Series: Applied Mathematics, Mechanics, And Engineering, 66(5), (2023).
- Gordeev E.G., Galushko A.S., Ananikov V.P., Improvement of quality of 3D printed objects by elimination of microscopic structural defects in fused deposition modeling. PloS one, 13(6), e0198370 (2018).
- Heidari-Rarani M., Ezati N., Sadeghi P., Badrossamay M., Optimization of FDM process parameters for tensile properties of polylactic acid specimens using Taguchi design of experiment method, Journal of Thermoplastic Composite Materials, 2020;35(12):2435-2452, doi:10.1177/089270572096456.
- Kam M., İpekçi A., Şengül Ö., Investigation of the effect of FDM process parameters on mechanical properties of 3D printed PA12 samples using Taguchi method, Journal of Thermoplastic Composite Materials, 36(3), 273-290 (2021), DOI: 10.1177/08927057211006459.
- Khusheef A. A., Shahbazi M., Optimizing FDM process parameters: predictive insights through Taguchi, regression and neural networks, Progress in Additive Manufacturing, 10, 112-125 (2024), DOI: 10.1007/s40940-023-00270-1.
- Kyratsis P., Kontou E., Anagnostopoulos D., Quality performance evaluation of thin-walled PLA 3D printed parts using the Taguchi method and Grey relational analysis, Journal of Manufacturing Processes, 52, 234-244 (2020), DOI: 10.1016/j.jmapro.2020.01.028.
- Liparoti S., Sofia D., Romano A., Marra F., Pantani R., Fused filament deposition of PLA: The role of interlayer adhesion in the mechanical performances. Polymers, 13(3), 399 (2021).
- Peng X., Zhang X., Song X., Zhang S., Yan C., Effect of process parameters on tensile strength of FDM printed composite parts, Applied Sciences, 12(12), 6028 (2022), DOI: 10.3390/app12126028.
- Rahman M.M., Sultana J., Rayhan S.B. et al., Optimization of FDM manufacturing parameters for the compressive behavior of cubic lattice cores: an experimental approach by Taguchi method, Int J Adv Manuf Technol 129, 1329-1343 (2023), https://doi.org/10.1007/s00170-023-12342-9.
- Sahoo S.K., Nayak S., Naik B.N., Investigation of the influence of fused deposition modeling 3D printing parameters on tensile and hardness properties, Materials, 17(23), 5951 (2022), DOI: 10.3390/ma17235951.
- Turner B.N., Gold S.A., A review on 3D printing with fused deposition modeling (FDM), Rapid Prototyping Journal, 21(3), 250-261, doi:10.1108/RPJ-01-2013-0017 (2015).
- Verim Ö., Saeed O., Eid M.H., Mahmoud S.F., Elwakeel A.E., Investigation of the effects of 3D printing parameters on mechanical tests of PLA parts produced by MEX 3D printing using Taguchi method, Scientific Reports, 15, 15008 (2025), DOI: 10.1038/s41598-025-98832-0.
- Zhang A., Singh V., Paulsen J.A., Microscale imaging of leak pathways in FDM 3D printed fluidics, EngrXiv preprint (2024), DOI: 10.31224/4104.