References
- Artioli, E., R. Battaglia, and A. Tralli. 2013. “Effects of May 2012 Emilia earthquake on industrial buildings of early ’900 on the Po river line.” Engineering Structures 56: 1220-1233.
- Biondini, F., A. Titi, and G. Toniolo. 2012. “Pseudodynamic Tests and Numerical Simulations on a Full-Scale Prototype of a Multi-Storey Precast Structure.” 15WCEE. Lisboa.
- Bournas, Dionysios A., Paolo Negro, and Francisco J. Molina. 2013. “Pseudodynamic tests on a full-scale 3-storey precast concrete building: Behavior of the mechanical connections and floor diaphragms.” Engineering Structures 57: 609-627.
- Buratti, Nicola, Fabio Minghini, Elena Ongaretto, Marco Savoia, and Nerio Tullini. 2017. “Empirical seismic fragility for the precast RC industrial buildings damaged by the 2012 Emilia (Italy) earthquakes.” Earthquake Engng Struct. Dyn. 46 (14): 2317-2335.
- Capozzi, V., G. Magliulo, and G. Manfredi. 2012. “Nonlinear Mechanical Model of Seismic Behaviour of Beam-Column Pin Connections.” 15WCEE. Lisboa.
- Carydis, P., I. Psycharis, and H. Mouzakis. 2007. PRECAST EC8: seismic behaviour of precast concrete structures with respect to Eurocode 8. Final Report of the contribution of LEE/NTUA. FP5 Project No G6RD-CT-2002-00857.
- CEN (Comité Européen de Normalisation). 2004. Eurocode 8: Design of structures for earthquake resistance – Part 1: General rules, seismic actions and rules for buildings (EN 1998-1). Brussels: CEN.
- Cruz, Ana Maria, and Laura J. Steinberg. 2005. “Industry Preparedness for Earthquakes and Earthquake-Triggered Hazmat Accidents in the 1999 Kocaeli Earthquake.” Earthquake Spectra 21 (2): 285-303.
- Demartino, Cristoforo, Ivo Vanzi, Giorgio Monti, and Concetta Sulpizio. 2018. “Precast industrial buildings in Southern Europe: loss of support at frictional beam-to-column connections under seismic actions.” Bull Earthquake Eng 16: 259–294.
- Deyanova, Manya, Stefano Pampanin, and Roberto Nascimbene. 2014. “Assessment Of Single-Storey Precast Concrete Industrial Buildings With Hinged Beam-Column Connections With And Without Dowels.” Second European conference on earthquake engineering and seismology. Istanbul.
- Ercolino, M., G. Magliulo, and G. Manfredi. 2016. “Failure of a precast RC building due to Emilia-Romagna earthquakes.” Failure of a precast RC building due to Emilia-Romagna earthquakes 118: 262-273.
- European Comision. 2012. Design Guidelines for Connections of Precast Structures under Seismic Actions. Luxembourg: Joint Research Centre of the European Commission.
- European Commission. 1999. COST Action C1 - Control of the semi-rigid behaviour of civil engineering structural connections. Luxembourg : Office for Official Publications of the European Communities.
- Fischinger, Matej, Blazˇ Zoubek, and Tatjana Isakovic. 2014. “Chapter 4: Seismic Response of Precast Industrial Buildings.” Perspectives on European Earthquake Engineering and Seismology (Springer Cham Heidelberg New York Dordrecht London) 1 (34): 131-194.
- Grimaz, Stefano, and Alberto Maiolo. 2010. “The Impact of the 6th April 2009 L’aquila Earthquake (italy) on the Industrial Facilities and Life Lines. Considerations in Terms of Natech Risk.” Chemical Engineering Transactions 19: 279-284.
- Karadogan, F, E Yuksel, and I E Bal. 2012. “The Seismic Behavior of An Asymmetric Exterior Precast Beam-Column Connection.” 15 WCEE. Lisboa.
- Keronen, A., and J. Hietala. 1998. “TESTS AND ANALYSIS OF THE CONNECTIONS IN PRECAST CONCRETE PORTAL FRAME.” COST C1 : Control of the semi-rigid behaviour of civil engineering structural connections. Liège.
- Kremmyda, Georgia D., Yasin M. Fahjan, and Spyros G. Tsoukantas. 2014. “Nonlinear FE analysis of precast RC pinned beam-to-column connections under monotonic and cyclic shear loading.” Bulletin of Earthquake Engineering 12: 1615-1638.
- Liberatore, Laura, Luigi Sorrentino, Domenico Liberatore, and Luis D. Decanini. 2013. “Failure of industrial structures induced by the Emilia (Italy) 2012 earthquakes.” Engineering Failure Analysis 34: 629-647.
- Magliulo, Gennaro, Davide Bellotti, Maddalena Cimmino, and Roberto Nascimbene. 2018. “Modeling and Seismic Response Analysis of RC Precast Italian Code-Conforming Buildings.” JOURNAL OF EARTHQUAKE ENGINEERING 22: 140-167.
- Magliulo, Gennaro, Giovanni Fabbrocino, and Gaetano Manfredi. 2008. “Seismic assessment of existing precast industrial buildings using static and dynamic nonlinear analyses.” Engineering Structures 30: 2580-2588.
- Magliulo, Gennaro, Marianna Ercolino, Crescenzo Petrone, Orsola Coppola, and Gaetano Manfredia. 2014. “The Emilia Earthquake: Seismic Performance of Precast Reinforced Concrete Buildings.” Earthquake Spectra 30 (2): 891-912.
- Magliulo, Gennaro, Marianna Ercolino, Maddalena Cimmino, Vittorio Capozzi, and Gaetano Manfredi. 2014. “FEM analysis of the strength of RC beam-to-column dowel connections under monotonic actions.” Construction and Building Materials 69: 271-284.
- Magliulo, Gennaro, Vittorio Capozzia, Giovanni Fabbrocino, and Gaetano Manfredi. 2011. “Neoprene–concrete friction relationships for seismic assessment of existing precast buildings.” Engineering Structures 33: 532-538.
- MSZ EN. 2014. “MSZ EN 12390-13:2014, Testing hardened concrete. Determination of secant modulus of elasticity in compression.”
- MSZ EN. 2015. “MSZ EN 12390-3:2015, Testing hardened concrete. Compressive strength of test specimens.”
- MSZ EN. 2009. “MSZ EN 12390-5:2009, Testing hardened concrete. Flexural strength of test specimens.”
- Nigel Priestley, M. J. 1996. “The PRESSS Program - Current Status and Proposed Plans for Phase Ill.” PCI Journal 44 (2): 22-40.
- Pollini, Andrea Vittorio, Nicola Buratti, and Claudio Mazzotti. 2021. “Behavior factor of concrete portal frames with dissipative devices based on carbon wrapped steel tubes.” Bulletin of Earthquake Engineering 19: 553–578.
- Psycharis, N. Ioannis, and P. Harris Mouzakis. 2012. “Shear resistance of pinned connections of precast members to monotonic and cyclic loading.” Engineering Structures 41: 413-427.
- Senel, Sevket Murat, and Ali Haydar Kayhan. 2010. “Fragility based damage assesment in existing precast industrial buildings: A case study for Turkey.” Structural Engineering and Mechanics 34 (1): 39-60.
- Sika Services AG. 2019. Product Data Sheet for Sika AnchorFix-3030. Zürich. https://industry.sika.com/en/home/renewable-energies/wind-energy/concrete-tower/anchoring/sika-anchorfix-3030.html.
- Sørensen, Jesper H., Linh C. Hoang, John F. Olesen, and Gregor Fischer. 2017. “Testing and modeling dowel and catenary action in rebars crossing shear joints in RC.” Engineering Structures 145: 234-245.
- Task Group 6.12: fib Design Handbook. 2014. Planing and design handbook on precast building structures. Lausanne: International Federation for Structural Concrete.
- Titi, Andrea, Fabio Biondini, and Giandomenico Toniolo. 2018. “Seismic assessment of existing precast structures with dry-friction beam-to-column joints.” Bull Earthquake Eng 16: 2067–2086.
- Toniolo, G. 2012. “European research on seismic behaviour of precast structures.” NZSEE. Lausanne.
- Zoubek, Blaž, Matej Fischinger, and Tatjana Isakovic. 2015. “Estimation of the cyclic capacity of beam-to-column dowel connections in precast industrial buildings.” Bulletin of Earthquake Engineering 13 (7).
- Zoubek, Blaz, Tatjana Isakovic, Yasin Fahjan, and Matej Fischinger. 2013. “Cyclic failure analysis of the beam-to-column dowel connections in precast industrial buildings.” Engineering Structures 52: 179–191.