Example of Matlab/Simulink Tool Usage for Evaluation of Wind Turbine Operation During Voltage Regulation and Reactive Power Regulation

Vinko Kalfić; Goran Kujundžić

doi:10.2478/bhee-2023-0012

.blurhash-client-img { display: none !important; }

Example of Matlab/Simulink Tool Usage for Evaluation of Wind Turbine Operation During Voltage Regulation and Reactive Power Regulation

B&H Electrical Engineering

Volume 17 (2023): Issue s1 (December 2023)

By: Vinko Kalfić and Goran Kujundžić

Open Access

|Dec 2023

Abstract

In this paper, the types of wind turbines are listed and described, with the emphasis on horizontal-axis wind turbines. The parts are explained in more detail, the criteria for the selection of the wind turbine generator and the methods of managing the wind turbine are defined. In the Matlab/Simulink programming environment, a model of an electric power network with a wind farm was created, and the characteristics of the operation of wind turbines under normal and fault conditions were presented.

References

A. S. Siddiqui et al., “Experimental Investigations of Hybrid Vertical Axis Wind Turbine”, in 4th International Conference on Energy, Environment and Sustainable Development 2016 (EESD 2016), Jamshoro, Pakistan, November 1-3, 2016.
Search in Google Scholar Back to article
J. V. Akwa, H.A. Vielmo, and A.P. Petry, “A review on the performance of Savonius wind turbines,” Renewable and sustainable energy reviews, vol. 16, pp. 3054-3064, June 2012.
Search in Google Scholar Back to article
X. Liu et al., “Vibration-induced aerodynamic loads on large horizontal axis wind turbine blades,” Appl. Energy, vol. 185, pp. 1109-1119, January 2017.
Search in Google Scholar Back to article
R.H. Crawford, “Life cycle energy and greenhouse emissions analysis of wind turbines and the effect of size on energy yield,” Renewable and Sustainable Energy Reviews, vol. 13, pp. 2653-2660, July 2009.
Search in Google Scholar Back to article
Vries, “A new approach to big wind turbines,” New Energy, vol.4, pp. 40-42, 2001.
Search in Google Scholar Back to article
X. Tanga et al., “A Direct Approach of Design Optimization for Small Horizontal Axis Wind Turbine Blades,” Procedia CIRP, vol. 36, pp.12-16, December 2015.
Search in Google Scholar Back to article
IEC Power Transformers – Transformers for Wind Turbine Applications, IEC 60076-16, 2011.
Search in Google Scholar Back to article
G. Jose and R. Chaco, “A review on wind turbine transformer,” in International Conference on Magnetics, Machines & Drives (AICERA2014 iCMMD). Kottayam, India, July 24-26, 2014.
Search in Google Scholar Back to article
J. Larsen, et al., “Experiences from Middelgrunden 40 MW offshore wind farm,” Copenhagen offshore wind conference. Denmark: Copenhagen, October 26-28, 2005.
Search in Google Scholar Back to article
O. Wasynczuk, D. T. Man and J. P. Sullivan, “Dynamic behavior of a class of wind turbine generators during random wind fluctuations,” IEEE Transactions on Power Apparatus and Systems, vol. 6, pp. 2837-2845, June 1981.
Search in Google Scholar Back to article
J. G. Slootweg, et al., “General model for representing variable speed wind turbines in power system dynamics simulations,” IEEE Transactions on power systems, vol. 18, pp. 144-151, February 2003.
Search in Google Scholar Back to article
G. K. Singh, “Self-excited induction generator research-a survey,” Electric power system research, vol. 69, pp. 107-114, May 2004.
Search in Google Scholar Back to article
V. Yaramasu et al., “High-Power Wind Energy Conversion Systems: State-of-the-Art and Emerging Technologies,” Proceedings of IEEE, vol. 103, pp. 740-788, May 2015.
Search in Google Scholar Back to article
J. Guo, X. Cai, and Y. Gong, “Decoupled control of active and reactive power for a grid-connected doubly-fed induction generator,” in Third International Conference on Electric Utility Deregulation and Restructuring and Power Technologies, Nanjing, China, April 6-9, 2008.
Search in Google Scholar Back to article
G. Tapia, and A. Tapia, “Wind generation optimization algorithm for a doubly fed induction generator,” IEE Proc-Gener. Transm. Distrib., vol. 152, pp. 253-263, March 2005.
Search in Google Scholar Back to article
S. Müller, M. Deicke, and R. W. Doncker, “Doubly fed induction generator system for wind turbines,” IEEE Industry Application Magazine, vol. 8, pp. 26-33, May 2002.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/bhee-2023-0012 | Journal eISSN: 2566-3151 | Journal ISSN: 2566-3143

Journal RSS Feed

Language: English

Page range: 1 - 9

Submitted on: Aug 23, 2023

Accepted on: Oct 25, 2023

Published on: Dec 2, 2023

Published by: Bosnia and Herzegovina National Committee CIGRÉ

In partnership with: Paradigm Publishing Services

Publication frequency: 2 issues per year

Keywords:

Related subjects:

Computer sciences, other,

Engineering,

Electrical engineering,

Fundamentals of electrical engineering,

Mechanical engineering,

Mechatronics and automotive

© 2023 Vinko Kalfić, Goran Kujundžić, published by Bosnia and Herzegovina National Committee CIGRÉ
This work is licensed under the Creative Commons Attribution 4.0 License.

Volume 17 (2023): Issue s1 (December 2023)