References
- [1] M. Dresselhaus and I. Thomas, “Alternative energy technologies,” Nature, vol. 414, no. 6861, pp. 332-337, 2001.
- [2] K. Chidambaram, L. Malhotra, and K. Chopra, “Spray-pyrolysed cobalt black as a high temperature selective absorber,” Thin Solid Films, vol. 87, no. 4, pp. 365-371, 1982.
- [3] U. Stimming, S. Singhal, and H. Tagawa, “Proceedings of the Fifth International Symposium on Solid Oxide Fuel Cells (SOFC-V),” 1997: The Electrochemical Society.
- [4] J. Cox, D. D. Wagman, V. A. Medvedev, and D. P. Wagman, CODATA key values for thermodynamics. Hemisphere Pub, 1989.
- [5] L. Mendoza Blanco, “Revêtements protecteurs à base d’oxyde de cobalt, de titane ou de cérium pour la cathode de nickel des piles à combustible à carbonates fondus,” Paris 6, 2003.
- [6] A. Gulino, P. Dapporto, P. Rossi, and I. Fragalà, “A novel self-generating liquid MOCVD precursor for Co3O4 thin films,” Chemistry of materials, vol. 15, no. 20, pp. 3748-3752, 2003.
- [7] D. Mardare and P. Hones, “Optical dispersion analysis of TiO2 thin films based on variable-angle spectroscopic ellipsometry measurements,” Materials Science and Engineering: B, vol. 68, no. 1, pp. 42-47, 1999.
- [8] T. Modes, B. Scheffel, C. Metzner, O. Zywitzki, and E. Reinhold, “Structure and properties of titanium oxide layers deposited by reactive plasma activated electron beam evaporation,” Surface and Coatings Technology, vol. 200, no. 1-4, pp. 306-309, 2005.
- [9] M. Zhang, G. Lin, C. Dong, and L. Wen, “Amorphous TiO2 films with high refractive index deposited by pulsed bias arc ion plating,” Surface and Coatings Technology, vol. 201, no. 16-17, pp. 7252-7258, 2007.
- [10] Z. Zhao, B. K. Tay, and G. Yu, “Room-temperature deposition of amorphous titanium dioxide thin film with high refractive index by a filtered cathodic vacuum arc technique,” Applied optics, vol. 43, no. 6, pp. 1281-1285, 2004.
- [11] A. Bougrine, A. El Hichou, M. Addou, J. Ebothé, A. Kachouane, and M. Troyon, “Structural, optical and cathodoluminescence characteristics of undoped and tin-doped ZnO thin films prepared by spray pyrolysis,” Materials Chemistry and Physics, vol. 80, no. 2, pp. 438-445, 2003.
- [12] R. Chamberlin and J. Skarman, “Chemical spray deposition process for inorganic films,” Journal of the Electrochemical Society, vol. 113, no. 1, p. 86, 1966.
- [13] S. Abbas, A. Aboud, M. Irfan, and S. Alam, “Ser,” Mater. Sci. Eng., vol. 60, p. 012058, 2014.
- [14] B. D. Cullity, “Elements of X-ray diffraction, Addison,” Wesley Mass, pp. 127-31, 1978.
- [15] L. Miao, P. Jin, K. Kaneko, A. Terai, N. Nabatova-Gabain, and S. Tanemura, “Preparation and characterization of polycrystalline anatase and rutile TiO2 thin films by rf magnetron sputtering,” Applied Surface Science, vol. 212, pp. 255-263, 2003.
- [16] M. Abdel-Aziz, I. Yahia, L. Wahab, M. Fadel, and M. Afifi, “Determination and analysis of dispersive optical constant of TiO2 and Ti2O3 thin films,” Applied surface science, vol. 252, no. 23, pp. 8163-8170, 2006.
- [17] N. Talebian and M. Kheiri, “Sol–gel derived nanostructured nickel oxide films: effect of solvent on crystallographic orientations,” Solid state sciences, vol. 27, pp. 79-83, 2014.
- [18] E. H. Putley, The Hall effect and related phenomena. Butterworths, 1960.
- [19] K. Klepper, O. Nilsen, and H. Fjellvåg, “Growth of thin films of Co3O4 by atomic layer deposition,” Thin Solid Films, vol. 515, no. 20-21, pp. 7772-7781, 2007.
- [20] Y. Jiang, Y. Wu, B. Xie, Y. Xie, and Y. Qian, “Moderate temperature synthesis of nanocrystalline Co3O4 via gel hydrothermal oxidation,” Materials chemistry and physics, vol. 74, no. 2, pp. 234-237, 2002.
- [21] F. Zhan, B. Geng, and Y. Guo, “Porous Co3O4 nanosheets with extraordinarily high discharge capacity for lithium batteries,” Chemistry–A European Journal, vol. 15, no. 25, pp. 6169-6174, 2009.
- [22] R. Manogowri, R. M. Mathelane, S. Valanarasu, I. Kulandaisamy, A. B. Fathima, and A. Kathalingam, “Effect of annealing temperature on the structural, morphological, optical and electrical properties of Co 3 O 4 thin film by nebulizer spray pyrolysis technique,” Journal of Materials Science: Materials in Electronics, vol. 27, no. 4, pp. 3860-3866, 2016.
- [23] A. Louardi, A. Rmili, F. Ouachtari, A. Bouaoud, B. Elidrissi, and H. Erguig, “Characterization of cobalt oxide thin films prepared by a facile spray pyrolysis technique using perfume atomizer,” Journal of Alloys and Compounds, vol. 509, no. 37, pp. 9183-9189, 2011.
- [24] A. U. Mane and S. Shivashankar, “MOCVD of cobalt oxide thin films: dependence of growth, microstructure, and optical properties on the source of oxidation,” Journal of crystal growth, vol. 254, no. 3-4, pp. 368-377, 2003.
- [25] O. Gençyılmaz, T. Taşköprü, F. Atay, and İ. Akyüz, “Synthesis, characterization and ellipsometric study of ultrasonically sprayed Co 3 O 4 films,” Applied Physics A, vol. 121, no. 1, pp. 245-254, 2015.
- [26] N. Kouidri, S. Rahmane, and A. Allag, “Substrate temperature-dependent properties of sprayed cobalt oxide thin films,” Journal of Materials Science: Materials in Electronics, vol. 30, no. 2, pp. 1153-1160, 2019.
- [27] J. Pal and P. Chauhan, “Study of physical properties of cobalt oxide (Co3O4) nanocrystals,” Materials characterization, vol. 61, no. 5, pp. 575-579, 2010.
- [28] L. Kadam and P. Patil, “Thickness-dependent properties of sprayed cobalt oxide thin films,” Materials chemistry and physics, vol. 68, no. 1-3, pp. 225-232, 2001.
- [29] S. J. Ikhmayies and R. N. Ahmad-Bitar, “A study of the optical bandgap energy and Urbach tail of spray-deposited CdS: In thin films,” Journal of Materials Research and Technology, vol. 2, no. 3, pp. 221-227, 2013.
- [30] P. Patil, L. Kadam, and C. Lokhande, “Preparation and characterization of spray pyrolysed cobalt oxide thin films,” Thin Solid Films, vol. 272, no. 1, pp. 29-32, 1996.