The Calculus Method for Cogging from the Condition of Teeth Bending Strain

Radu Florea; Adriana Florea; Augustin Stoica; Claudiu Isarie; Laurențiu Prodea

doi:10.2478/aucts-2025-0009

.blurhash-client-img { display: none !important; }

The Calculus Method for Cogging from the Condition of Teeth Bending Strain

Acta Universitatis Cibiniensis. Technical Series

Volume 77 (2025): Issue 1 (December 2025)

By: Radu Florea, Adriana Florea, Augustin Stoica, Claudiu Isarie and Laurențiu Prodea

Open Access

|Dec 2025

Abstract

The paper presents a new toothing calculation procedure in the condition of the teeth bending deflections. Accepting the same hypothesis as in the case of the calculation at the tooth base bending, the method allows the toothing dimensioning by determining the distance between the axes, the module, or the checking, dependent on a maximum admissible arrow. Through the virtual or equivalent gear, the method can be extended to bevel or spur inclined gearings.

References

Costopoulos TN., Spitas CA., Optimum gear tooth geometry for minimum fillet stress using BEM and experimental verification with photoelasticity., Journal of Mechanical Design, 128(5): 1159-1164, (2016).
Search in Google Scholar Back to article
Florea, R., Florea, A.: Organe de maşini., Editura Tehnică, Bucureşti, (2007).
Search in Google Scholar Back to article
ISO 6336 – Calculation of load capacity of spur and helical gears - Application for industrial gears, (2002).
Search in Google Scholar Back to article
Lisle TJ., Shaw BA. Frazer, RC. Frazer., External spur gear root bending stress: A comparison of ISO 6336: 2006, AGMA 2101-D04, ANSYS finite element analysis and strain gauge techniques. Mechanism and Machine Theory, 111: 1-9, (2017).
Search in Google Scholar Back to article
Matek, W., Muhs, D., Maschinen-elemente., Viewegs Fachbucher der Technik, (2000).
Search in Google Scholar Back to article
Niemann, G., Winter, H.: Maschinen-elemente., Springer-Verlag, (2003).
Search in Google Scholar Back to article
Pedersen NL., Improving bending stress in spur gears using asymmetric gears and shape optimization., Mechanism and Machine Theory, 45: 1707-1720, (2010).
Search in Google Scholar Back to article
Thomas B., Sankaranarayanasamy K., Ramachandra S., Kumar SPS., Search method applied for gear tooth bending stress prediction in normal contact ratio asymmetric spur gears., Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232: 4647-4663, (2018).
Search in Google Scholar Back to article
Wen Q., Du Q., Zhai X. A new analytical model to calculate the maximum tooth root stress and critical section location of spur gear. Mechanism and Machine Theory, 128: 275-286, (2018).
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/aucts-2025-0009 | Journal eISSN: 2668-6449 | Journal ISSN: 1583-7149

Journal RSS Feed

Language: English

Page range: 65 - 71

Published on: Dec 31, 2025

Published by: Lucian Blaga University of Sibiu

In partnership with: Paradigm Publishing Services

Publication frequency: 1 issue per year

Keywords:

gear,

toothing calculation procedure,

teeth bending deflections,

outflank

Related subjects:

Engineering,

Electrical engineering,

Automation,

Mechanical engineering,

Production technology,

Process engineering and industrial engineering

© 2025 Radu Florea, Adriana Florea, Augustin Stoica, Claudiu Isarie, Laurențiu Prodea, published by Lucian Blaga University of Sibiu
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 77 (2025): Issue 1 (December 2025)