Regime Mixing Ratio in Vacuum Dilute Phase Pneumatic Conveying Systems

Tanase Tanase

doi:10.2478/aucft-2014-0004

.blurhash-client-img { display: none !important; }

Regime Mixing Ratio in Vacuum Dilute Phase Pneumatic Conveying Systems

Acta Universitatis Cibiniensis. Series E: Food Technology

Volume 18 (2014): Issue 1 (June 2014)

By: Tanase Tanase

Open Access

|Jan 2015

Read online

Abstract

This paper analyses some aspects of regime mixing ratio (RMR) in Vacuum Dilute Phase Pneumatic Conveying Systems in order to measure the energy efficiency of these systems. RMR variation curve profile is determined and the proportionality between Theoretical Mixing Ratio (TMR) and RMR is evaluated. The equation of the Characteristic Curve of the Ventilator type APRG-902/C is given. The profile of the RMR variation curve by specific load of the pipe is determined.

1. Gerecke K. H. ( 1991). Technische Werte der Getraideverarbeitung und Futtermitteltechnick - Teil 3: Fordertechnick. Detmold, Germany: Verlag Moritz - Schafer
Search in Google Scholar
2. Meissner, W. ( 2008). Fordertechnick in Silo und Muhle. Agrimedia Gmbh, Handbuch Mehl - und Schalmullerei ( pp. 61-92) . Clenze, Germany: Erling Verlag GmbH & Co.
Search in Google Scholar
3. Costin, I. (1983). Tehnologii de Prelucrare a Cerealelor in Industria Moraritului. Bucuresti: Editura Tehnica
Search in Google Scholar
4. Klinzing, G. (2009). Historical Review of Pneumatic Conveying and Solids Processing World Wide. Pittsburgh AIChE Paper, University of Pittsburgh: http://www.engineering.pitt.edu/GeorgeKlinzing/
Search in Google Scholar
5. Bulat, A. (1962). Instalatii de Transport Pneumatic. Bucuresti: Editura Tehnica
Search in Google Scholar
6. Klinzing, G. E., Rizk, F., Marcus, R. & Leung, L.S. (2010). Pneumatic Conveying of Solids - A Theoretical and Practical Approach, third edition. London, England: Springer Dordrecht Heidelberg London.10.1007/978-90-481-3609-4
Open DOI Search in Google Scholar
7. Tanase, T (2012). Cercetari Privind Eficientizarea Transportului Pneumatic in Industria Moraritului. Sibiu: Universitatea “Lucian Blaga” (MECTS, 6149/07.11.2012)
Search in Google Scholar
8. Tănase, T. (2012). Defining of the limit condition for the in-vacuum dilute phase pneumatic conveying systems - Clogging Constant. Acta Universitatis Cibiniensis, series E: Food Technology, Vol. XVI, no. 2, ISSN 1221-4973, 33-42
Search in Google Scholar
9. Euroventilatori ( 2006). Elettroventilatori Centrifughi. Catalogo Edizione Gennaio 2006, from: http://www.euroventilatori-nt.com/prodotti/default.asp?idObject =52& lang=2
Search in Google Scholar
10. Eck, B. (2003). Ventilatoren.Entwurf un Betrieb der Radial-, Axial- und Querstromventilatoren. Berlin: Verlag Springer10.1007/978-3-642-55650-0
Open DOI Search in Google Scholar
11. Greenheck Fan Corp., (June 2005). Fan Fundamentals: Fundamentals, Fan Selection, Application Based Selection, Performance Theory. Rev 2, from: http://www.greenheck.com/media/pdf/otherinfo/FanFundamentalsMay2005.pdf
Search in Google Scholar
12. LMNO Engineering, Research and Software Ltd., (2013). Circular Pressurized Water Pipes with Pump Curve Hazen-Williams. Ohio, USA. From: http://www.lmnoeng.com/Pipes/HWpump.htm
Search in Google Scholar