Evaluation of Service Brake Braking of Selected Group of Vehicles Depending on Wear of Brake System‘s Parts

Kožuch, Peter; Hujo, Ľubomír; Kaszkowiak, Jerzy; Markiewicz-Patalon, Marietta

doi:10.2478/ata-2024-0014

Abstract

The paper deals with the evaluation of service brake braking of a selected group of vehicles depending on the wear of brake system‘s parts. During the research, the technical condition of brake systems, the degree of wear of brake discs, brake pads, and the measurement of braking forces using a roller brake tester was monitored and evaluated on a sample of 16 intercity buses for a period of three years. The measurement was carried out on 2 selected intercity buses SOR C 10.5 and IVECO Crossway. The maximum braking forces on both axles of buses were measured using a roller brake tester. Then, the percentage braking of the vehicle was calculated and compared with the minimum required braking according to applicable legislation. Based on the inspection of technical condition of brake pads and discs, it was possible to detect the wear and tear of these elements of the brake system (which was manifested during the inspection of the vehicle on the roller brake tester), and it was also possible to record the insufficient value of the required minimum braking during the calculation.

References

BELOEV, I. 2021. Development and evaluation of personal urban concept vehicle powered by a hydrogen fuel cell. In Acta Technologica Agriculturae, vol. 24, no. 3, pp. 112–118. DOI: https://doi.org/10.2478/ata-2021-0019
Search in Google Scholar Back to article
BOGOMOLOV, V. – KLIMENKO, V. – LEONTIEV, D. – RYZYH, L. – SMYRNOV, O. – KHOLODOV, M. 2020. Improving the brake control effectiveness of vehicles equipped with a pneumatic brake actuator. In Science & Technique, vol. 19, no. 1, pp. 55–62. DOI: https://doi.org/10.21122/2227-1031-2020-19-1-55-62
Search in Google Scholar Back to article
GERLICI, J. – KRAVCHENKO, K. – HAUSER, V. – GORBUNOV, M. – LACK, T. – MOGILA, V. 2020. Innovative technical solutions to improve the cooling efficiency of friction brake elements. In GOPALAKRISHNAN, K. – PRENTKOVSKIS, O. – JACKIVA, I. – JUNEVIČIUS, R. (eds). TRANSBALTICA XI: Transportation Science and Technology. TRANSBALTICA 2019. Lecture Notes in Intelligent Transportation and Infrastructure. Cham : Springer, pp. 341–349. DOI: https://doi.org/10.1007/978-3-030-38666-5_36
Search in Google Scholar Back to article
HE, Y. – WANG, Y. – WU, F. – YANG, R. – WANG, P. – SHE, S. – REN, D. 2023. Temperature monitoring of vehicle brake drum based on dual light fusion and deep learning. In Infrared Physics and Technology, vol. 133, article no. 104823. DOI: https://doi.org/10.1016/j.infrared.2023.104823
Search in Google Scholar Back to article
HUANG, W. – FAN, Y. – YU, M. 2020. Research on loaded brake performance test of trucks. In International Journal of Heavy Vehicle Systems, vol. 27, no. 5, pp. 648–662. DOI: https://doi.org/10.1504/IJHVS.2020.111256
Search in Google Scholar Back to article
KOLLA, E. – ONDRUŠ, J. – GOGOLA, M. – ŠARIĆ, Z. 2020. Braking characteristics of the specified modern electric vehicle during intensive braking. In Advances in Science and Technology Research Journal, vol. 14, no. 3, pp. 125–134. DOI: https://doi.org/10.12913/22998624/122197
Search in Google Scholar Back to article
KUCHAR, P. – JANOŠKO, I. – HOLÚBEK, M. – ČEDÍK, J. – PEXA, M. 2022. The accuracy assessment of devices used for distance measuring in dynamic vehicle tests. In Acta Technologica Agriculturae, vol. 25, no. 3, pp. 150–156. DOI: https://doi.org/10.2478/ata-2022-0023
Search in Google Scholar Back to article
LEONTIEV, D. N. – BOGOMOLOV, V. A. – KLYMENKO, V. I. – RYZHYH, L. A. – LOMAKA, S. I. – SUHOMLIN, A. V. – KURIPKA, A. V. – FROLOV, A. A. 2022. About braking of wheeled vehicle equipped with automated brake control system. In Science & Technique, vol. 21, no. 1, pp. 63–72. DOI: https://doi.org/10.21122/2227-1031-2022-21-1-63-72
Search in Google Scholar Back to article
MAČUŽIĆ, S. – SAVELJIĆ, I. – LUKIĆ, J. – GLIŠOVIĆ, J. – FILIPOVIĆ, N. 2015 Thermal analysis of solid and vented disc brake during the braking process. In Journal of Serbian Society for Computational Machines, vol. 9, no. 2, pp. 19–26. DOI: https://doi.org/10.5937/jsscm1502019M
Search in Google Scholar Back to article
Mădălin-Florin, P. – NICOLAE, V. 2019. Study of brake system parameters for commercial vehicles. In BURNETE, N. – VARGA, B. (eds). Proceedings of the 4th International Congress of Automotive and Transport Engineering (AMMA 2018). Cham : Springer, pp. 686–694. DOI: https://doi.org/10.1007/978-3-319-94409-8_80
Search in Google Scholar Back to article
MILLER, J. I. – CEBON, D. 2010. A high performance pneumatic braking system for heavy vehicles. In Vehicle System Dynamics, vol. 48, no. 1, pp. 373–392. DOI: https://doi.org/10.1080/00423111003774472
Search in Google Scholar Back to article
MIN, K. – YEON, K. – JO, Y. – SIM, G. – SUNWOO, M. – HAN, M. 2020. Vehicle deceleration prediction based on deep neural network at braking conditions. In International Journal of Automotive Technology, vol. 21, pp. 91–102. DOI: https://doi.org/10.1007/s12239-020-0010-2
Search in Google Scholar Back to article
MOHAMMED, A. Q. – HUSSAIN, I. Y. – ALI, A. H. – ABDULLAH, O. I. 2023. Experimental and numerical analysis for thermal problem of frictional brake system. In Computational Thermal Sciences: An International Journal, vol. 15, no. 4, pp. 55–68. DOI: https://doi.org/10.1615/ComputThermalScien.v15.i4.50
Search in Google Scholar Back to article
MONDAL, S. – NANDI, A. 2023. Improvement of braking system towards maintaining constant brake pedal feel during vehicle deceleration. In Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 45, article no. 237. DOI: https://doi.org/10.1007/s40430-023-04146-5
Search in Google Scholar Back to article
POPA, M. F. – CAPĂTĂ, M. S. D. – BURNETE, N. 2020. Experimental research on brake behavior for different types of commercial vehicles. In DUMITRU, I. – COVACIU, D. – RACILA, L. – ROSCA, A. (eds). 30th SIAR International Congress of Automotive and Transport Engineering. SMAT 2019. Cham : Springer, 406–413. DOI: https://doi.org/10.1007/978-3-030-32564-0_48
Search in Google Scholar Back to article
KUMAR, V. V. – KUMARAN, S. S. 2019. Friction material composite: types of brake friction material formulations and effects of various ingredients on brake performance – a review. In Materials Research Express, vol. 6, article no. 082005. DOI: https://doi.org/10.1088/2053-1591/ab2404
Search in Google Scholar Back to article
SLOVAK REPUBLIC. Act no. 74/2018 Methodical instruction for carrying out inspections of brake systems of vehicles of categories M2, M3, N2, N3, O3 and O4 during technical inspections.
Search in Google Scholar Back to article
STRAKY, H. – KOCHEM, M. – SCHMITT, J. – ISERMANN, R. 2003. Influences of braking system faults on vehicle dynamics. In Control Engineering Practice, vol. 11, no. 3, pp. 337–343. DOI: https://doi.org/10.1016/S0967-0661(02)00301-5
Search in Google Scholar Back to article
ŚWIDERSKI, A. – BORUCKA, A. – JACYNA-GOŁDA, I. – SZCZEPAŃSKI, E. 2019. Wear of brake system components in various operating conditions of vehicle in the transport company. In Eksploatacja i Niezawodność – Maintenance and Reliability, vol. 21, no. 1, pp.1–9. DOI: https://doi.org/10.17531/ein.2019.1.1
Search in Google Scholar Back to article
TOMA, M. – ANDREESCU, C. – MICU, D. 2017. Comparative study on the lateral run-out of friction surfaces measurement of brake discs using a brake roller tester and a dial gauge. In MATEC Web of Conferences. 21st Innovative Manufacturing Engineering & Energy International Conference – IManE&E 2017, vol. 112, article no. 07010. DOI: https://doi.org/10.1051/matecconf/201711207010
Search in Google Scholar Back to article
WEI, L. – WANG, X. – LIU, H. – LI, L. 2022. System modeling, experimental validation and pressure estimation of the pneumatic braking system. In Mechanical Systems and Signal Processing, vol. 187, article no. 109938. DOI: https://doi.org/10.1016/j.ymssp.2022.109938
Search in Google Scholar Back to article
ZHANG, Z. – SUN, N. – CHEN, Y. – AHMADIAN, M. 2021. Detailed modeling of pneumatic braking in long combination vehicles. In SAE International Journal of Commercial Vehicles, vol. 14, no. 3, pp. 245–258. DOI: https://doi.org/10.4271/02-14-03-0020
Search in Google Scholar Back to article
ZHENG, H. – MA, S. – LIU, Y. 2018. Vehicle braking force distribution with electronic pneumatic braking and hierarchical structure for commercial vehicle. In Proceedings of the Institution of Mechanical Engineers, Part 1: Journal of Systems and Control Engineering, vol. 232, no. 4, pp. 481–493. DOI: https://doi.org/10.1177/0959651818757877
Search in Google Scholar Back to article
ZULHILMI, I. M. – HEERWAN, M. P. – ASYRAF, S. M. – SOLLEHUDIN, I. M. – ISHAK, I. M. 2020. Experimental study on the effect of emergency braking without anti-lock braking system to vehicle dynamics behaviour. In International Journal of Automotive and Mechanical Engineering (IJAME), vol. 17, no. 2, pp. 7832–7841. DOI: https://doi.org/10.15282/ijame.17.2.2020.02.0583
Search in Google Scholar Back to article

Evaluation of Service Brake Braking of Selected Group of Vehicles Depending on Wear of Brake System‘s Parts

Abstract

Paradigm

My account