References
- ALIBOEV, B. A. 2016. Performance characteristics and wear pattern of precision parts of cotton tractor hydraulics. In Journal of Friction and Wear, vol. 37, pp. 83–85. DOI: https://doi.org/10.3103/S1068366616010025
- BAROŠKA, J. 2012. Hydrostatic Mechanisms. Žilina : Hydropneutech, s. r. o., 388 pp. ISBN 9788097089726. (In Slovak)
- BERGADA, J. M. – KUMAR, S. – DAVIES, D. L. – WATTON, J. 2012. A complete analysis of axial piston pump leakage and output flow ripples. In Applied Mathematical Modelling, vol. 36, no. 4, pp. 1731–1751. DOI: https://doi.org/10.1016/j.apm.2011.09.016
- CASOLI, P. – VACCA, A. – FRANZONI, G. 2005. A numerical model for the simulation of external gear pumps. In Proceedings of the JFPS International Symposium on Fluid Power, vol. 2005, no. 6, pp. 705–710. DOI: https://doi.org/10.5739/isfp.2005.705
- DOBROTA, D. – LALIĆ, B. – ORŠULIĆ, M. 2010. Experimental modeling of volumetric efficiency of high-pressure external gear pump. In Naše more, vol. 57, no. 5–6, pp. 235–240.
- FANGWEI, X. – RUI, X. – GANG, S. – CUNTANG, W. 2017. Flow characteristics of accelerating pump in hydraulic-type wind power generation system under different wind speeds. In International Journal of Advanced Manufacturing Technology, vol. 92, pp. 189–196. DOI: https://doi.org/10.1007/s00170-017-0122-7
- HAO, X. – ZHOU, X. – LIU, X. – SANG, X. 2016. Flow characteristics of external gear pumps considering trapped volume. In Advances in Mechanical Engineering, vol. 8, no. 10, pp. 1–10. DOI: https://doi.org/10.1177/1687814016674100
- HUJO, Ľ. – NOSIAN, J. – BOROWSKI, S. – MARKIEWICZ-PATALON, M. – TOMIĆ, M. – KOŽUCH, P. 2022. Design of a laboratory test equipment for measuring and testing mobile energy means with simulation of operating conditions. In Processes, vol. 10, no. 8, article no. 1435. DOI: https://doi.org/10.3390/pr10081435
- HRYCIÓW, Z. – RYBAK, P. – GIELETA, R. 2021. The influence of temperature on the damping characteristic of hydraulic shock absorbers. In Eksploatacja i Niezawodność – Maintenance and Reliability, vol. 23, no. 2, pp. 346–351. DOI: https://doi.org/10.17531/ein.2021.2.14
- CHANGBIN, G. – ZONGXIA, J. – CHOUZHAN, H. 2014. Theoretical study of flow ripple for an aviation axial-piston pump with damping holes in the valve plate. In Chinese Journal of Aeronautics, vol. 27, no. 1, pp. 169–181. DOI: https://doi.org/10.1016/j.cja.2013.07.044
- INAGUMA, Y. – YOSHIDA, N. 2013. Mathematical analysis of influence of oil temperature on efficiencies in hydraulic pumps for automatic transmissions. In SAE International Journal of Passenger Cars: Mechanical Systems, vol. 6, no. 2, pp. 786–797. DOI: https://doi.org/10.4271/2013-01-0820
- INAGUMA, Y. 2012. Oil temperature influence on friction torque characteristics in hydraulic pumps. In Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 226, no. 9, pp. 2267–2280. DOI: https://doi.org/10.1177/0954406211430572
- KIM, J. H. – KIM, S. G. 2013. The flow rate characteristics of external gear pump for EHPS. In 2013 4th International Conference on Intelligent Systems, Modelling and Simulation, 29–31 January, Bangkok, Thailand, pp. 346–349. DOI: https://doi.org/10.1109/ISMS.2013.113
- KOSIBA, J. 2017. Evaluation of Degradation Processes of Biodegradable Fluids. Habilitation thesis. Nitra : Slovak University of Agriculture in Nitra, 146 pp.
- KOSIBA, J. – HUJO, Ľ. – TULÍK, J. – RAŠO, M. 2013. Study of the impact of synthetic fluid on the lifetime of hydraulic pump. In Advanced Materials Research, vol. 801, pp. 7–12. DOI: https://doi.org/10.4028/www.scientific.net/AMR.801.7
- KOSIBA, J. – TKÁČ, Z. – JABLONICKÝ, J. – SHCHERBAK, V. – GANUSHCHAK-YEFIMENKO, L. – PAUMER, M. – BUKOROS, T. – ČURGALIOVÁ, G. – ZACHAR, M. 2022. Experimental testing of the influence of the operating loading on the flow characteristics of hydraulic pump. In Eksploatacja i Niezawodność – Maintenance and Reliability, vol. 24, no. 2, pp. 583–589. DOI: https://doi.org/10.17531/ein.2022.3.19
- KUČERA, M. – ALEŠ, Z. 2017. Morphology analysis of friction particles generated in tractor transmission oils. In Acta Technologica Agriculturae, vol. 20, no. 3, pp. 57–62. DOI: https://doi.org/10.1515/ata-2017-0012
- KUČERA, M. – HNILICOVÁ, M. 2022. Changes in the key physicochemical parameters and selected trace elements of oil due to its use in hydraulic system of woodworking equipment. In Acta Technologica Agriculturae, vol. 25, no. 3, pp. 137–143. DOI: https://doi.org/10.2478/ata-2022-0021
- MURRENFOFF, H. 2014. Showing the future-oriented new ways and solutions. In Ölhydraulik und Pneumatik, vol. 58, no. 1–2, pp. 10–13.
- RANA, D. A. 2015. Performance evaluation of external gear pump with the used of burnt oil. In International Journal of Advanced Technology in Engineering and Science, vol. 3, no. 1, pp. 466–473.
- NEDELJKOVIC, M. S. – CANTRAK, D. S. – JANKOVIC, N. Z. – ILIC, D. B. – MATIJEVIC, M. S. 2018. Virtual instruments and experiments in engineering education lab setup with hydraulic pump. In 2018 IEEE Global Engineering Education Conference (EDUCON), Santa Cruz de Tenerife, Spain, pp. 1139–1146. DOI: https://doi.org/10.1109/EDUCON.2018.8363358
- RENN, J. C. – TSAI, C. 2005 Development of an unconventional electro-hydraulic proportional valve with fuzzy-logic controller for hydraulic presses. In International Journal of Advanced Manufacturing Technology, vol. 26, pp. 10–16. DOI: https://doi.org/10.1007/s00170-003-1973-7
- SIGLOCH, H. 2009. Engineering Fluidmechanics. Berlin : Springer-Verlag, 581 pp. ISBN 978-3-642-03089-5 (In German: Technische Fluidmechanik)
- TKÁČ, Z. – KOSIBA, J. – HUJO, Ľ. – JABLONICKÝ, J. – NOSIAN, J. 2018. Experimental hydraulic device for the testing of hydraulic pumps and liquids. In Tribology in Industry, vol. 40, no. 1, pp. 149–155. DOI: https://doi.org/10.24874/ti.2018.40.01.14
- TRIVEDY, H. K. – BHATT, D. V. 2017. Effect of lubricating oil on tribological behaviour in pin on disc test rig. In Tribology in Industry, vol. 39, no. 1, pp. 90–99. DOI: https://doi.org/10.24874/ti.2017.39.01.10
- TOTTEM, G. E. – DE NEGRI, V. J. 2012. Handbook of Hydraulic Fluid Technology. Boca Raton, Florida : Taylor & Francis Group, 982 pp. ISBN 9780429092848
- WILL, D. – GEBHARDT, N. 2011. Hydraulics. Heidelberg : Springer Berlin, 511 pp. ISBN 978-3-642-17243-4. (In German: Hydraulik). DOI: https://doi.org/10.1007/978-3-642-17243-4
- WU, D. – YAO, J. – HUANG, Y. J. 2012. Study on the speed control system of hydraulic pump-motor based on PID neural network. In Advanced Materials Research, vol. 542–543, pp. 759–764. DOI: https://doi.org/10.4028/www.scientific.net/AMR.542-543.759