References
- BARANOVSKY, V. M. – HEVKO, R. B. – DZYURA, V. O. – KLENDII, O. M. – KLENDII, M. B. – ROMANOVSKY, R. M. 2018. Justification of rational parameters of a pneumoconveyor screw feeder. In INMATEH: Agricultural Engineering, vol. 54, no. 1, pp. 15–24.
- FERNANDEZ, J. W. – CLEARY, P. W. – MCBRIDE, W. 2011. Effect of screw design on hopper draw dawn by a horizontal screw feeder. In Seventh International Conference on CFD in the Minerals and Process Industries CSIRO, Melbourne, Australia, 9–11 December, рр. 1–6.
- HEVKO, R. B. – ZALUTSKYI, S. Z. – TKACHENKO, I. G. – KLENDII, O. M. 2015. Development and investigation of reciprocating screw with flexible helical surface. In INMATEH: Agricultural Engineering, vol. 46, no. 2, pp. 133–138.
- HEVKO, B. M. – HEVKO, R. B. – KLENDII, O. M. – BURIAK, M. V. – DZYADYKEVYCH, Y. V. – ROZUM, R. I. 2018a. Improvement of machine safety devices. In Acta Polytechnica, Journal of Advanced Engineering, vol. 58, no. 1, pр. 17–25.
- HEVKO, R. B. – LIUBIN, M. V. – TOKARCHUK, O. A. – LYASHUK, O. L. – POHRISHCHUK, B. V. – KLENDII, O. M. 2018b. Determination of the parameters of transporting and mixing feed mixtures along the curvilinear paths of tubular conveyors. In INMATEH: Agricultural Engineering, vol. 55, no. 2, pp. 97–104.
- HOU, Q. – DONG, K. – YU, A. 2014. Dem study of the flow of cohesive particles in a screw feeder. In Powder Technology, vol. 256, рр. 529–539.
- HUI, L. – WANFU, L. 2013. The experimental research of screw conveyor feeding system. In New Trends in Mechanical Engineering and Materials. Book Series: Applied Mechanics and Materials, vol. 251, pp. 101–103.
- KLENDII, M. B. 2007. Substantiation of the parameters of a reloading branchpipe of a screw conveyer. Ternopil I. Puluj National Technical University, 137 pp.
- LYASHUK, O. L. – ROGATYNSKA, O. R. – SERILKO, D. L. 2015. Modelling of the vertical screw conveyer loading. In INMATEH: Agricultural Engineering. vol. 45, no.1, pp. 87–94.
- LOVEIKIN, V. – ROGATYNSKA, L. 2011. A model of loose material transportation by means of high-speed conveyers with elastic operating devices. In Bulletin of Ternopil I. Puluj National Technical University, vol. 16, pp. 66–70.
- LYASHUK, O. – SOKIL, M. – KLENDIY, V. – SKYBA, O. – DMYTRENKO, V. 2016. The study on nonlinear model of dynamics of a system ‘extruder elastic auger working body’. In Acta Technologica Agriculturae, vol. 19, no. 4, pp. 102–107.
- MONDAL, D. 2018. Study on filling factor of short length screw conveyor with flood-feeding condition. Materials Today: Proceedings, vol. 5, pp. 1286–1291.
- TRIPATHI, N. – SHARMA, A. – MALLICK, S. S. – WYPYCH P. W. 2015. Energy loss at bends in the pneumatic conveying of fly ash. In Particuology, vol. 21, pp. 65–73.
- OWEN, P. J. – CLEARY, P. W. 2010. Screw conveyor performance: comparison of discrete element modelling with laboratory experiments. In Progress in Computational Fluid Dynamics, vol. 10, no. 5–6, pp. 327–333.
- PEZO, L. – JOVANOVIC, A. – PEZO, M. – COLOVIC, R. 2015. Modified screw conveyor-mixers – discrete element modeling approach. In Advanced Powder Technology, vol. 26, рр. 1391–1399.
- ROGATYNSKA, О. – LYASHUK, О. – PELESHOK, Т. – LIUBACHIVSKYI, R. 2015. Investigation of the process of loose material transportation by means of inclined screw conveyers. In Bulletin of Ternopil I. Puluj National Technical University, vol. 79, pp. 137–143.
- ROGATINSKIY, R. – HEVKO, I. – GYPKA, A. – GARMATYK, O. – MARTSENKO, S. 2017. Feasibility study of the method choice of manufacturing screw cleaning elements with the development and use of software. In Acta Technologica Agriculturae, vol. 20, no. 2, pp. 36–41.
- SUN, X. X. – MENG, W. J. – YUAN, Y. 2017. Design method of a vertical screw conveyor based on Taylor-Couette-Poiseuille stable helical vortex. In Advances in Mechanical Engineering, vol. 9, no.7, рр. 123–132.
- ZAREIFOROUSH, H. – KOMARIZADEH, M. H. – ALIZADEH, M. R. 2010. Effect of crop-screw parameters on rough rice grain damage in handling with a horizontal screw conveyor. In Journal of Food Agriculture and Environment, vol. 8, no. 3–4, pp. 494–499.