The Possibilities of Using Ecological Liquids in Tribological Gliding Systems with a Selected Surface Created by the Radial Welding Technology

Tóth, František; Fürstenzeller, Adam; Rusnák, Juraj; Bošanský, Miroslav; Kadnár, Milan

doi:10.2478/ata-2019-0024

Abstract

Presented paper deals with the issue of lubricating tribological systems formed by a double pair operating under mixed conditions of mixed friction before and after experimental tests, which were conducted in accordance with the selected methodology using Tribotestor M‘06 test machine. The lubricating media included ecological oils Plantohyd 46 S by Fuchs and EAL Hydraulic 46 manufactured by the Mobil company. Applied ecological oils can be used in agricultural mobile machines as a replacement for conventional lubricants. The tests were conducted on designated material double pairs. The shaft was made of steel 16MnCr5. The second observed friction element in terms of glide angle test was a steel plate made of S235JR, gliding surface of which was produced utilizing flame powder coating technology. The results were statistically processed and are presented in the form of graphs, tables and figures.

References

BHUSHAN, B. 2001. Modern Handbook of Tribology. Boca Raton : CRC Press, 1760 pp. ISBN 0-8493-8403-6.
Search in Google Scholar Back to article
BIJELIĆA, I. – MOR, N. – ŽIVKOVIĆ, M. – TUBIN, V. – STOŽINIĆ, T. 2017. The influence of the contact pressure on the value of the coefficient of friction. In Tribology in Industry, vol. 39, no. 2, pp. 255–259.10.24874/ti.2017.39.02.13
Search in Google Scholar Back to article
BIRKAVS, A. – SMIGINS, R. 2018. Experimental research on compatibility of mineral and biobased hydraulic oils. In Agronomy Research, vol. 16, no. S1, pp. 968–976.
Search in Google Scholar Back to article
BUJNA, M. – PRÍSTAVKA, M. – DOSTÁL, P. – KORENKO, M. – KADNÁR M. 2016. Influence of roughness on quality molybdenum deposit layer by thermal spraying. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 64, no. 1, pp. 9–14.10.11118/actaun201664010009
Search in Google Scholar Back to article
CHOTĚBORSKÝ, R. – KUČERA, M. – HERÁK, D. 2013. Effect of the welding parameters on the hardfacing abrasive wear. In Scientia Agriculturae Bohemica, vol. 44, no. 4, pp. 232–236.10.7160/sab.2013.440406
Search in Google Scholar Back to article
KOPILÁKOVÁ, B. – TURZA, J. – HUJO, Ľ. – KOSIBA, J. 2017. Evaluation of hydraulic resistance in various liquids and temperature. In Tribology in Industry, vol. 39, no. 1, pp. 129–135.10.24874/ti.2017.39.01.14
Search in Google Scholar Back to article
KOSIBA, J. – ČORNÁK, Š. – GLOS, J. – JABLONICKÝ, J. – VOZÁROVÁ, V. – PETROVIĆ, A. – CSILLAG, J. 2016. Monitoring oil degradation during operating tests. In Agronomy Research, vol. 14, no. 5, pp. 1626–1634.
Search in Google Scholar Back to article
KOSIBA, J. – HUJO, Ľ. – TULÍK, J. – RAŠO, M. 2013. Study of the impact of synthetic fluid on the lifetime of hydraulic pump. In Advanced Materials Research, vol. 801, pp. 7–12.10.4028/www.scientific.net/AMR.801.7
Search in Google Scholar Back to article
KUČERA, M. – ALEŠ, Z. 2017. Morphology analysis of friction particles generated in tractor transmission oils. In Acta Technologica Agriculturae, vol. 20, no. 3, pp. 57–62.10.1515/ata-2017-0012
Search in Google Scholar Back to article
KUČERA, M. – CHOTĚBORSKÝ, R. 2013. Analysis of the process of abrasive wear under experimental conditions. In Scientia Agriculturae Bohemica, vol. 44, no. 2, pp. 102–106.10.7160/sab.2013.440206
Search in Google Scholar Back to article
KUČERA, M. – ALEŠ, Z. – PAVLŮ, J. – HNILICOVÁ, M. 2016. Applying of automatic laser particle counter as technique to morphology assessment and distribution of wear particles during lifetime of transmission oils. In Key Engineering Materials, vol. 669, pp. 417–425.10.4028/www.scientific.net/KEM.669.417
Search in Google Scholar Back to article
KUČERA, M. – TKÁČ, Z. 2010. Analysis of biodegradable oil on synthetic basis in a variable displacement axial piston pump of swash plate. In Acta Facultatis Technicae, vol. 15, no. 1, pp. 81–88.
Search in Google Scholar Back to article
MAJDAN, R. – TKÁČ, Z. – TULÍK, J. – KOSIBA, J. – ZIGIŇ, P. – BUREŠ, L. 2010. Evaluation of ecological hydraulic fluid tests based on the flow efficiency of the hydrogenator. In Acta Technologica Agriculturae, vol. 13, no. 3, pp. 61–64.
Search in Google Scholar Back to article
MANG, T. – DRESEL, W. 2017. Lubricants and Lubrication. Weinheim : WILEY-VCH Verlag GmbH & Co. KGaA, 1262 pp. ISBN 3-540-41909-8.10.1002/9783527645565
Search in Google Scholar Back to article
STACHOWIAK, G. – BATCHELOR, A. 2014. Engineering Tribology. Oxford : Butterworth-Heinemann, 884 pp. ISBN 0-7506-7836-4.
Search in Google Scholar Back to article
STOJILKOVIĆ, M. – KOLB, M. 2016. Tribological properties of biodegradable universal tractor transmission oil. In Tribology in Industry, vol. 38, no. 2, pp. 229–234.
Search in Google Scholar Back to article
STN EN 10027-1. 2018. Designation systems for steels. Part 1: Steel names.
Search in Google Scholar Back to article
TILLMANN, W. – HAGEN, L. – KOKALJ, D. 2017. Spray characteristics and tribo-mechanical properties of high-velocity arc-sprayed WCW2C iron-based coatings. In Journal of Thermal Spray Technology, vol. 26, no. 7, pp. 1685–1700.10.1007/s11666-017-0605-y
Search in Google Scholar Back to article
TÓTH, F. – RUSNÁK, J. – BELOEV, H. I. – KADNÁR, M. – PÁLEŠ, D. 2014. The study of geometrical changes of a given sliding couple caused by the influence of operation. Ruse : Angel Kanchev University of Ruse, 82 pp. ISBN 978-954-712-628-2.
Search in Google Scholar Back to article

The Possibilities of Using Ecological Liquids in Tribological Gliding Systems with a Selected Surface Created by the Radial Welding Technology

Abstract

Paradigm

My account