References
- BHUSHAN, B. 2001. Modern Handbook of Tribology. Boca Raton : CRC Press, 1760 pp. ISBN 0-8493-8403-6.
- BIJELIĆA, I. – MOR, N. – ŽIVKOVIĆ, M. – TUBIN, V. – STOŽINIĆ, T. 2017. The influence of the contact pressure on the value of the coefficient of friction. In Tribology in Industry, vol. 39, no. 2, pp. 255–259.
- BIRKAVS, A. – SMIGINS, R. 2018. Experimental research on compatibility of mineral and biobased hydraulic oils. In Agronomy Research, vol. 16, no. S1, pp. 968–976.
- BUJNA, M. – PRÍSTAVKA, M. – DOSTÁL, P. – KORENKO, M. – KADNÁR M. 2016. Influence of roughness on quality molybdenum deposit layer by thermal spraying. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 64, no. 1, pp. 9–14.
- CHOTĚBORSKÝ, R. – KUČERA, M. – HERÁK, D. 2013. Effect of the welding parameters on the hardfacing abrasive wear. In Scientia Agriculturae Bohemica, vol. 44, no. 4, pp. 232–236.
- KOPILÁKOVÁ, B. – TURZA, J. – HUJO, Ľ. – KOSIBA, J. 2017. Evaluation of hydraulic resistance in various liquids and temperature. In Tribology in Industry, vol. 39, no. 1, pp. 129–135.
- KOSIBA, J. – ČORNÁK, Š. – GLOS, J. – JABLONICKÝ, J. – VOZÁROVÁ, V. – PETROVIĆ, A. – CSILLAG, J. 2016. Monitoring oil degradation during operating tests. In Agronomy Research, vol. 14, no. 5, pp. 1626–1634.
- KOSIBA, J. – HUJO, Ľ. – TULÍK, J. – RAŠO, M. 2013. Study of the impact of synthetic fluid on the lifetime of hydraulic pump. In Advanced Materials Research, vol. 801, pp. 7–12.
- KUČERA, M. – ALEŠ, Z. 2017. Morphology analysis of friction particles generated in tractor transmission oils. In Acta Technologica Agriculturae, vol. 20, no. 3, pp. 57–62.
- KUČERA, M. – CHOTĚBORSKÝ, R. 2013. Analysis of the process of abrasive wear under experimental conditions. In Scientia Agriculturae Bohemica, vol. 44, no. 2, pp. 102–106.
- KUČERA, M. – ALEŠ, Z. – PAVLŮ, J. – HNILICOVÁ, M. 2016. Applying of automatic laser particle counter as technique to morphology assessment and distribution of wear particles during lifetime of transmission oils. In Key Engineering Materials, vol. 669, pp. 417–425.
- KUČERA, M. – TKÁČ, Z. 2010. Analysis of biodegradable oil on synthetic basis in a variable displacement axial piston pump of swash plate. In Acta Facultatis Technicae, vol. 15, no. 1, pp. 81–88.
- MAJDAN, R. – TKÁČ, Z. – TULÍK, J. – KOSIBA, J. – ZIGIŇ, P. – BUREŠ, L. 2010. Evaluation of ecological hydraulic fluid tests based on the flow efficiency of the hydrogenator. In Acta Technologica Agriculturae, vol. 13, no. 3, pp. 61–64.
- MANG, T. – DRESEL, W. 2017. Lubricants and Lubrication. Weinheim : WILEY-VCH Verlag GmbH & Co. KGaA, 1262 pp. ISBN 3-540-41909-8.
- STACHOWIAK, G. – BATCHELOR, A. 2014. Engineering Tribology. Oxford : Butterworth-Heinemann, 884 pp. ISBN 0-7506-7836-4.
- STOJILKOVIĆ, M. – KOLB, M. 2016. Tribological properties of biodegradable universal tractor transmission oil. In Tribology in Industry, vol. 38, no. 2, pp. 229–234.
- STN EN 10027-1. 2018. Designation systems for steels. Part 1: Steel names.
- TILLMANN, W. – HAGEN, L. – KOKALJ, D. 2017. Spray characteristics and tribo-mechanical properties of high-velocity arc-sprayed WCW2C iron-based coatings. In Journal of Thermal Spray Technology, vol. 26, no. 7, pp. 1685–1700.
- TÓTH, F. – RUSNÁK, J. – BELOEV, H. I. – KADNÁR, M. – PÁLEŠ, D. 2014. The study of geometrical changes of a given sliding couple caused by the influence of operation. Ruse : Angel Kanchev University of Ruse, 82 pp. ISBN 978-954-712-628-2.