References
- BERNÁT, R. – ZÁLEŽÁK, Z. – KECSKÉS, N. – BLAŠKO, P. 2013. Assessing the weld quality of manganese steel. In Acta Technologica Agriculturae, vol. 16, no. 4, pp. 99–102.
- BOYER, R. R. 1996. An overview on the use of titanium in the aerospace industry. In Materials Science and Engineering, vol. 213, no. 1–2, pp. 103–114.
- ČERNÝ, M. – DOSTÁL, P. – MAZAL, P. – ŠUSTR, M. 2016a. Verification of the quality of the weld when utilising the MAG/CO 2 method. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 64, no. 1, pp. 31–42.
- ČERNÝ, M. – DOSTÁL, P. – ŠUSTR, M. 2016b. Visualization of the coated electrode welding. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 64, no. 1, pp. 43–51.
- ČSN EN 10088-1: 2015. Stainless Steel – Part 1: Stainless Steel Overview. Praha: Český normalizační institut. (In Czech: Korozivzdorné oceli – Část 1: Přehled korozivzdorných ocelí).
- FUJII, H. – TAKAHASHI, K. – YAMASHITA, Y. 2003. Application of titanium and its alloys for automobile parts. In Nippon steel technical report, Shinnittetsu giho, vol. 378, no. 88, pp. 62–67.
- HLUCHÝ, M. – KOLOUCH, J. 2002. Engineering Technology 1 – Part 1: Materials Science. 1st ed., Praha : Scientia, spol. s r. o. 266 pp. ISBN 8071832626. (In Czech: Strojírenská technologie 1 – 1. díl Nauka o materiálu).
- HLUCHÝ, M. – MODRÁČEK, O. – PAŇÁK, R. 2002. Engineering Technology 1 – Part 2: Metallography and Heat Treatment. Praha : Scientia, spol. s r. o., 173 pp. ISBN 8071832650. (In Czech Strojírenská technologie 1 – 2. Díl: Metalografie a tepelné zpracování).
- CHEN, S. – ZHANG, M. – HUANG, J. – CUI, C. – ZHANG, H. – ZHAO, X. 2014. Microstructures and mechanical property of laser butt welding of titanium alloy to stainless steel. In Materials & Design, vol. 53, pp. 504–511.
- MATSUI, H. 1998. Arc welding technologies of galvanized steel sheet for automotive underbody. In Proceedings of 4th International Conference on Zinc and Zinc Alloy Coated Steel Sheet. Japan : The Iron and Steel Institute, pp. 778–784.
- MORAVEC, J. – DIKOVITS, M. – BEAL, M. C. – NOVAKOVA, I. – CHANDEZON, R. – SOBOTKA, J. 2017. Selection of the proper diffusion welding parameters for the heterogeneous joint Ti grade 2/AISI 316L. In Manufacturing Technology, vol. 2, pp. 231–237.
- MOUSAVI, S. A. – SARTANGI, P. F. 2008. Effect of post-weld heat treatment on the interface microstructure of explosively welded titanium–stainless steel composite. In Materials Science and Engineering: vol. 494, no. 1–2, pp. 329–336.
- PARDAL, G. – GANGULY, S. – WILLIAMS, S. – VAJA, J. 2016. Dissimilar metal joining of stainless steel and titanium using copper as transition metal. In The International Journal of Advanced Manufacturing Technology, vol. 86, no. 5–8, pp. 1139–1150.
- POLÁKOVÁ, N. – DOSTÁL, P. – ČERNÝ, M. – VOTAVA, J. – DOBROCKY, D. 2017. Effect of heat treatment of CMT weld on its mechanical properties. In: MendelNet Proceedings of International PhD Students Conference. Mendel University in Brno, pp. 802–807. ISBN 9788075095299.
- SAGAR, D. B. A. – VIKAS, B. – SAHA, B. – NARASIAH, N. – JAYAPAL, P. – RAM, G. D. J. – RAO, M. S. K. 2018. Study of microstructure and mechanical properties of friction welded metastable beta titanium alloy titan 1023. In Materials Today Proceedings, vol. 5, no. 9, pp. 20760–20768.
- ŠUSTR, M. – DOSTÁL, P. – ZAČAL, J. 2016. The acoustic emission for monitoring the hardness of the cold metal transfer weld. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 64, no. 2, pp. 543–547.
- TALBOT, D. E. J. – TALBOT, J. D. R. 2019. Corrosion Science and Technology. 2nd ed., Florida : CRC Press LLC. 432 pp. ISBN 1420049887.