Comparison of PVD Coatings Nacro4 and TIALN + DLC Deposited on High Contact Ratio Gearing Interacting With Conventional and Ecological Lubricants

Fürstenzeller, Adam; Tóth, František; Kadnár, Milan; Rusnák, Juraj; Bošanský, Miroslav

doi:10.2478/ata-2019-0009

Abstract

Proposed paper deals with experimental tests performed on the Nieman M01 FZG test rig. Experiments were carried out in accordance with STN 65 6280 standard for FZG scuffing tests, from which load values for each load level were obtained. HCR gears made of 16MnCr5 material were utilized during experimental tests. Gear surface was deposited by PVD coatings of nACRo⁴ and TiAlN + DLC. Conventional lubricant MADIT PP 90H and biological lubricant OMW Biogear S150 were selected for lubrication environments. Aim of the experimental tests lied in application and comparison of PVD coatings deposited on HCR gears. Values of the maximum height of the assessed profile Rz for tip and reference diameters were measured after each load level. Results of experimental tests were statistically processed and relations between the maximum height of assessed profile Rz and load levels for both utilized coatings in both environments were established on the basis of these results.

References

BOBZIN, K. – BAGCIVAN, N. – GOEBBELS, N. – YILMAZ, K. – HOEHN, B. R. – MICHAELIS, K. – HOCHMANN, M. 2009. Lubricated PVD coatings for automotive applications. In Surface and Coatings Technology, vol. 204, pp. 1097–1101.10.1016/j.surfcoat.2009.07.045
Search in Google Scholar Back to article
BOŠANSKÝ, M. – VEREŠ, M. – TÖKÖLY, P. – VANYA, A. 2012. Non-standard Gears. Bratislava : SUT in Bratislava, 159 pp. ISBN 9788022737135. (In Slovak: Neštandardné ozubené prevody).
Search in Google Scholar Back to article
BOŠANSKÝ, M. – VANYA, A. – ČAPLOVIČ, Ľ. – HUDÁKOVÁ, M. – SONDOR, J. 2013a. Evaluation of properties of selected coatings on Aisi Grade 18Ni(250) maraging steel in terms of their use in gears. In Advanced Materials Research, vol. 746, pp. 179–185.10.4028/www.scientific.net/AMR.746.179
Search in Google Scholar Back to article
BOŠANSKÝ, M. – VANYA, A. – VEREŠ, M. 2013b. Evaluation of properties of selected coatings on steel C60E in terms of their use in gearing. In Advanced Materials Research, no. 25, pp. 81–85.10.4028/www.scientific.net/AMR.716.166
Search in Google Scholar Back to article
BOŠANSKÝ, M. – RUSNÁK, J. 2017. Assessment of options for applications TICN-MP + movic deposited on the convex-concave gearing working in interaction with the ecological lubricant. In Proceedings of 58^th International Conference of Machine Design Departments. ICMD 2017. Prague : Czech University of Life Sciences Prague, pp. 44–49.
Search in Google Scholar Back to article
BROMARK, M. – LARSSON, M. – HEDENQVIST, P. – OLSSON, M. – HOGMARK, S. 1992. Influence of substrate and surface topography on the critical surface force in scratch adhesion testing of TiN-coated steels. In Surface Coating Technology, vol. 52 pp. 195–203.10.1016/0257-8972(92)90046-D
Search in Google Scholar Back to article
DOSTÁL, P. – ROZLIVKA, J. – KUMBÁR, V. 2019. Operational degradation of engine oil in agricultural technology. In Acta Technologica Agriculturae, vol. 22, no. 1, pp. 17–21.10.2478/ata-2019-0004
Search in Google Scholar Back to article
HATAMLEH, O. – SMITH, J. – COHEN, D. – BRADLEY, R. 2009. Surface roughness and friction coefficient in peened friction stir welded 2195 aluminum alloy. In Applied Surface Science, vol. 255, no. 16, pp. 7414–742610.1016/j.apsusc.2009.04.011
Search in Google Scholar Back to article
HOEHN, B. R. – OSTER, P. – TOBIE, T. – MICHAELIS, K. 2008. Test methods for gear lubricants. In Goriva i Maziva, vol. 47, no. 2, pp. 129–157.
Search in Google Scholar Back to article
KADNÁR, M. – RUSNÁK, J. – TKÁČ, Z. – BOŠANSKÝ, M. 2017. Tribological experiments in automobile industry. In Visnik Nacionaľnovo Techničnovo Universitetu „CHPI“, no. 25, pp. 81–85.
Search in Google Scholar Back to article
LÜMKEMANN, A. – BEUTNER, M. – MORSTEIN, M. – KÖCHIG, M. – WENGLER, M. – CSELLE, T. – KARPUSCHEWSKI, B. 2014. A New Generation of PVD Coatings for High-Performance Gear Hobbing. In Coatings Conference. Thessaloniki, Greece, Oct.1–3, 2014.
Search in Google Scholar Back to article
MÁCHAL, P. – TKÁČ, Z. – KOSIBA, J. – JABLONICKÝ, J. – HUJO, Ľ. – KUČERA, M. – TULÍK, J. 2013. Design of a laboratory hydraulic device for testing of hydraulic pumps. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 61, no. 5, pp. 1313–1319.10.11118/actaun201361051313
Search in Google Scholar Back to article
MICHALCZEWSKI, R. – KALBARCZYK, M. – MICHALAK, M. – PIEKOSZEWSKI, W. – SZCZEREK, M. – TUSZYNSKI, W. – WILCZYNSKI, J. 2013. New scuffing test methods for the determination of the scufing resistance of coated gears. In Tribology – Fundamentals and Advancements, vol. 12, no. 4, pp.187–215.10.5772/54569
Search in Google Scholar Back to article
MIŠÁNY, J. 2015. Influence of the building machine transmission and the possibility to increase its carrying capacity with a focus to reduce the environmental load of soil. Bratislava : SUT in Bratislava, 115 pp. (In Slovak: Vplyv prevodového ústrojenstva stavebného stroja a možnosti zvýšenia jeho únosnosti so zameraním na zníženie ekologického zaťaženia pôdy).
Search in Google Scholar Back to article
PENGBO, M. I. – JINING, H. E. – YANFANG, Q. – KAI, C. 2017. Nanostructure reactive plasma sprayed TiCN coating. In Surface and Coatings Technology, vol. 309, pp. 1–510.1016/j.surfcoat.2016.11.033
Search in Google Scholar Back to article
RACKOV, M. – MILOVANČEVIĆ, M. – KANOVIĆ, Ž. – VEREŠ, M. – RAFA, K. – BANIĆ, M. – MILTENOVIĆ, A. 2014. Optimalization of HCR gearing geometry using generalized particle swarm optimalization algorithm. In Modern Methods of Construction Design, vol. 109, no. 10, pp. 539–545.10.1007/978-3-319-05203-8_72
Search in Google Scholar Back to article
STN 656280: 1985 Lubricants. Mechanical testing of lubricants in the FZG gear ring test machine.
Search in Google Scholar Back to article
TULÍK, J. – HUJO, Ľ. – KOSIBA, J. – JABLONICKÝ J. – JÁNOŠOVÁ, M. 2017. Evaluation of new biodegradable fluid on the basis of accelerated durability test, FTIR and ICP spectroscopy. In Research in Agricultural Engineering, vol. 63, no. 1, pp. 1–9.10.17221/6/2015-RAE
Search in Google Scholar Back to article
TULÍK, J. – KOSIBA, J. – BUREŠ, Ľ. – ŠINSKÝ V. 2013. Analysis of synthetic oil samples during an operating test. In Acta Technologica Agriculturae, vol. 16, no. 1, pp. 21–2410.2478/ata-2013-0006
Search in Google Scholar Back to article
ZÁPOTOČNÝ, J. 2014. Analysis of qualitative and quantitative characteristics of placed films in the system ‘film – cog side’ from the tribological point of view. Bratislava : SUT in Bratislava. (In Slovak: Určenie kvalitatívnych a kvantitatívnych charakteristík deponovaných povlakov v systéme povlak bok zuba z tribologického hľadiska).
Search in Google Scholar Back to article

Comparison of PVD Coatings Nacro4 and TIALN + DLC Deposited on High Contact Ratio Gearing Interacting With Conventional and Ecological Lubricants

Abstract

Paradigm

My account