Effect of Stochastics of Dimensional Parameters of Hauling Laminated Bushless Chain Elements of Improved Structure on Their Bearing Strength

Petro Kryvyi; Oleg Lyashuk; Petro Kryvins‘kyi; Maroš Korenko

doi:10.2478/ata-2014-0014

.blurhash-client-img { display: none !important; }

Effect of Stochastics of Dimensional Parameters of Hauling Laminated Bushless Chain Elements of Improved Structure on Their Bearing Strength

Acta Technologica Agriculturae

Volume 17 (2014): Issue 3 (September 2014)

By: Petro Kryvyi, Oleg Lyashuk, Petro Kryvins‘kyi and Maroš Korenko

Open Access

|Oct 2014

Abstract

The distribution densities of dimensional parameters of a hauling laminated bushless chain of improved structure were investigated in this paper. The authors suggest calculating the non-uniform load of internal and external links plates by probability coefcient K_m, for which the minimum, the most probable and the maximum values were determined. The formula for K_m determination depending on plate size variety due to a gap random value Δ and plate elastic deformation value under permitted payload was obtained. The efect of stochastics of dimensional parameters of hauling laminated bushless chain elements on their bearing strength is proved.

References

HLUSHCHENKO, I. P. 1953. About dependence of gesture of hauling laminated chain bone from its step. Scientifc messages of LPCh, vol. 17, 1953, Mechanical series, sb. 4.
Search in Google Scholar
IVASHKOV, I. I. 1960. Laminated chains. Constructing and calculation. Moscow: State Publishing. 1960, 264 pp.
Search in Google Scholar
KADNÁR, M. et al. 2011. The design and verifcation of experimental machine for real journal bearng testing. In Technički vjestnik, vol. 18, 2011, no. 1, p. 95–98. ISSN 1330-3651.
Search in Google Scholar
KADNÁR, M. – RUSNÁK, J. – KUČERA, M. 2007. Analýza kritických frekvencií pri skúškach na skúšobnom stroji Tribotestor. In Acta technologica agriculturae, roč. 10, 2007, č. 3–4, s. 66–69. ISSN 1335-2555.
Search in Google Scholar
KRYVYI, P. – DUBYNIAK, S. – KUTSEVYCH, A. 1999. Bearing strength of two-contour parallel-row chain-drives. In Announcer of the Ternopil State Technical University, vol. 4, 1999, no. 3, pp.102–108.
Search in Google Scholar
KRYVYI, P. – LYASHUK, O. – KRYVINS‘KYI, P. et al. 2013. Patent no. 81033. Ukraine laminated towing sleeveless chain. 2013. Digest no. 12, 6 pp.
Search in Google Scholar
RASKIN, R. M. – KRONHAUS, V. S. – KIN, J. B. 1972. Chain-drives of chisel settings. Moscow: Niedra. 1972, 168 pp.
Search in Google Scholar
RESHETOV, D. N. 1989. Details of machines (Textbook for students of machine building and mechanical specialities). Moscow: Engineer. 1989, 496 pp.
Search in Google Scholar
SERENSEN, S. V. – KOCHAIEV, V. P. – SHNEIDEROVYCH, R. I. 1975. Bearing strength and calculations of machine parts on durability. Moscow: Engineer. 1975, 488 pp.
Search in Google Scholar
SUKHARIEV, I. P. 1977. Durability of hinged joints of machines. Certifcate manual. Moscow: Engineer. 1977, 168 pp.
Search in Google Scholar
VENTTSEL‘, Y. S. 1969. Probability theory. Moscow: Publishing «Science». 1969, 576 pp.
Search in Google Scholar

Articles in this issue

DOI: https://doi.org/10.2478/ata-2014-0014 | Journal eISSN: 1338-5267

Journal RSS Feed

Language: English

Page range: 61 - 65

Published on: Oct 23, 2014

Published by: Slovak University of Agriculture in Nitra

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

hauling laminated chain,

mathematical expectation,

Related subjects:

Introductions and overviews,

Engineering, other

© 2014 Petro Kryvyi, Oleg Lyashuk, Petro Kryvins‘kyi, Maroš Korenko, published by Slovak University of Agriculture in Nitra
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 17 (2014): Issue 3 (September 2014)