Effect of Type of Cutting Tips on Cutting Forces in Turning

Pavel Polák; Ján Žitňanský; Martina Ferancová

doi:10.2478/ata-2014-0013

.blurhash-client-img { display: none !important; }

Effect of Type of Cutting Tips on Cutting Forces in Turning

Acta Technologica Agriculturae

Volume 17 (2014): Issue 3 (September 2014)

By: Pavel Polák, Ján Žitňanský and Martina Ferancová

Open Access

|Oct 2014

Abstract

The aim of this article is to demonstrate the efect of cutting materials and geometry of cutting tips on cutting forces in turning as well as the quality and precision of machined surface. The experiment focuses on measuring cutting forces when turning a sample of steel 11 523 at a constant feed rate and cut depth and at varying speeds of a spindle. Measurements were made using exchangeable cutting tips of diferent types. The results will be evaluated in terms of the impact of diferent characteristics of cutting tips and variable spindle speeds.

References

BÁTORA, B. - VASILKO, K. 2000. Obrobené povrchy. Technologická dedičnost', funkčnost'. Trenčín: TU, 2000, 184 pp. ISBN 80-88914-19-1.
Search in Google Scholar
GELETA, V. 2010. Machining technology. Bratislava: STU, 2010, 165 pp. ISBN 978-80-227-3335-9.
Search in Google Scholar
JANÁČ, A. - LIPA, Z. - PETERKA, J. 2006. Teória obrábania. Bratislava: STU, 2006, 199 pp. ISBN 80-227-2347-9.
Search in Google Scholar
KREIDL, M. 2005. Měření teploty - senzory a měřicí obvody. Praha: Marten, 2005, 240 pp. ISBN 80-7300-145-4.
Search in Google Scholar
NESLUŠAN, M. 2009. Sústruženie kalených ocelí. Žilina: Edis, 2009, 253 pp. ISBN 978-80-554-104-1.
Search in Google Scholar
PETRÍK, M. - KOTUS, M. 2009. Automatizácia tlakového liatia vo výrobnom procese. In Bezpečnost' - kvalita - spol'ahlivost' Košice: TU, 2009, pp. 173-177. ISBN 978-80-553-0137-2.
Search in Google Scholar
VYSOČANSKÁ, M. - SKLENÁR, M. - PETRÍK, M. - KOTUS, M. 2009. Hodnotenie spôsobilosti meracieho zariadenia. In Najnovšie trendy v pol'nohospodárstve, v strojárstve a v odpadovom hospodárstve. Nitra: SUA, 2009, pp. 327-332. ISBN 978-80-552-0208-2.
Search in Google Scholar
ŽITŇANSKÝ, J. - ŽARNOVSKÝ, J. - KOVÁČ, I. 2012. Rezné materiály a ich vplyv na proces sústruženia. In Kvalita a spol'ahlivost' technických systémov. Nitra: SUA, 2012, pp. 181-185. ISBN 978-80-552-0798-8.
Search in Google Scholar

Articles in this issue

DOI: https://doi.org/10.2478/ata-2014-0013 | Journal eISSN: 1338-5267

Journal RSS Feed

Language: English

Page range: 57 - 60

Published on: Oct 23, 2014

Published by: Slovak University of Agriculture in Nitra

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

turning,

Related subjects:

Introductions and overviews,

Engineering, other

© 2014 Pavel Polák, Ján Žitňanský, Martina Ferancová, published by Slovak University of Agriculture in Nitra
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 17 (2014): Issue 3 (September 2014)