References
- de Silva C. Vibration and Shock Handbook. Boca Raton: Taylor & Francis; 2005.
- Noga S. Analytical and Numerical Problems of Systems with Circular Symmetry Vibrations. Rzeszów: Publishing House of Rzeszow University of Technology; 2015.
- Drago RJ, Brown FW. The analytical and experimental evaluation of resonant response in high – speed, lightweight, highly loaded gearing. Journal of Mechanical Desing. 1981;103:346-356. https://doi.org/10.1115/1.3254914
- Friswell M, Mottershead J. Finite Element Model Updating in Structural Dynamics. Dordrecht: Kluwer Academic Publishers; 1995.
- Rao SS. Vibration of Continuous Systems. Hoboken: Wiley; 2007.
- Noga S, Maciejowska K, Rogalski T., Vibration analysis of an aviation engine turbine shaft shield. Aircraft Engineering and Aerospace Technology. 2021;93(9):1478-1487. https://doi.org/10.1108/AEAT-11-2020-0274
- Davar A, Azarafza R. Free vibration analysis of functionally graded annular circular plates using classical thin plate theory based on physical neutral surface. Journal of Vibration Engineering & Technologies. 2024;12:3873-3896. https://doi.org/10.1007/s42417-023-01092-3
- Bogacz R, Noga S. Free transverse vibration analysis of a toothed gear. Archive of Applied Mechanics. 2012;82(9):1158 – 1168. https://doi.org/10.1007/s00419-012-0608-6
- Noga S, Markowski T. Vibration analysis of a low – power reduction gear. Strength of Materials. 2016;48(4):507-514. https://doi.org/10.1007/s11223-016-9792-x
- Petrov EP. A method for use of cyclic symmetry properties in analysis of nonlinear multiharmonic vibrations of bladed discs. Proceedings of ASME Turbo Expo 2003. June 16 – 19. Atlanta. Georgia. USA. GT – 2003 – 38480. https://doi.org/10.1115/1.1644558
- Naseralavi SS, Salajegheh E, Salajegheh J, Fadaee MJ. Detection of damage in cyclic structures using an eigenpair sensivity matrix. Computers & Structures. 2012; 110 -111: 43-59. https://doi.org/10.1016/j.compstruc.2012.06.003
- Dong B. Modal Analysis of General Cyclically Symmetric Systems with Applications to Multi-Stage Structures. PhD Dissertation. Blacksburg: Virginia Polytechnic Institute and State University; 2019. http://hdl.handle.net/10919/102605
- Noga S. Transverse vibration analysis of a compound plate with using cyclic symmetry modelling. Vibration in Physical System. 2014; 26: 211-216.
- Noga S. Numerical and experimental analyses of vibrations of annular plates with multiple eccentric holes. Strength of Materials. 2016; 48(4): 524-532. https://doi.org/10.1007/s11223-016-9794-8
- Gao N, Wei Z, Wang Ch, Zhu D, Wang S. Experimental and analytical studies on eliminating natural frequency splitting of an axisymmetric structure with cyclically symmetric feature groups. Journal of Sound and Vibration. 2023; 562: 117829. https://doi.org/10.1016/j.jsv.2023.117829
- Shi X, Li Ch, Wei F. Unified approach for vibration analyses of annular sector and annular plates with general boundary conditions. Journal of Shanghai Jiaotong University (Science). 2017,22:449 – 458. https://doi.org/10.1007/s12204-017-1848-y
- Noga S, Bogacz R, Frischmuth K. Vibration analysis of toothed gear with cyclic symmetry modelling. Vibration in Physical System. 2012; 25:299-304.
- Noga S, Kwolek K. Free vibration analysis of aviation toothed gear with using cyclic symmetry modelling. Mechanical Overview. 2018; 11:47-51. https://doi.org/10.15199/148.2018.11.10
- Fudali P, Jagielowicz PE, Kalina A, Polowniak P, Sobolak M, Witkowski W. A novel method for determining the contact pattern area in gear meshing based on computer processing of pressure measurement film images. Materials. 2025;18(14): 3230 – 3272. https://doi.org/10.3390/ma18143230
- Fudali P, Markowski T, Pacana J, Machining simulation of Novikov profile gear models for analysis and computational calculations. Materials. 2025, 18(5):1155-1170. https://doi.org/10.3390/ma18051155
- Wang S, Xiu J, Cao S, Liu J. Analytical treatment with rigid – elastic vibration of permanent magnet motors with expanding application to cyclically symmetric power – transmission systems. ASME Journal of Vibration and Acoustics. 2014; 136(2): 021014. https://doi.org/10.1115/1.4025993
- Kaveh A, Hamedani KB, Joudaki A, Kamalinejad M. Optimal analysis for optimal design of cyclic symmetric structures subject to frequency constraints. Structures. 2021; 33: 3122-3136. https://doi.org/10.1016/j.istruc.2021.06.054
- Laxalde D, Lombard JP, Thouverez F. Dynamics of multistage bladed disks systems. Journal of Engineering for Gas Turbines and Power. 2007; 121:1058-1064. https://doi.org/10.1115/1.2747641
- Voldrich J, Polach P, Lazar J, Misek T. Use of cyclic symmetry properties in vibration analysis of bladed disks with friction contacts between blades. Procedia Engineering. 2014; 96:500-509. https://doi.org/10.1016/j.proeng.2014.12.122
-
25.
Min JB, Reddy TSR, Bakhle MA, Coroneos RM, Stefko GL, Provenza AJ, Duffy KP. Cyclic symmetry finite element forced response analysis of a distortion – tolerant fan with boundary layer ingestion. AIAA Paper 2018 – 1890. AIAA Aerospace Sciences Meeting. Kissimmee. Florida; 2018.
https://doi.org/10.2514/6.2018-1890
Min JB, Reddy TSR, Bakhle MA, Coroneos RM, Stefko GL, Provenza AJ, Duffy KP. Cyclic symmetry finite element forced response analysis of a distortion - tolerant fan with boundary layer ingestion. AIAA Paper 2018 - 1890. AIAA Aerospace Sciences Meeting Kissimmee. Florida; 2018 https://doi.org/10.2514/6.2018-1890
- Martin A, Thouverez F. Dynamic analysis and reduction of a cyclic symmetric system subjected to geometric nonlinearities. Journal of Engineering for Gas Turbines and Power. 2019;141:041027. https://doi.org/10.1115/1.4041001