References
- Suh SH, Kang SK, Chung DH, Stroud I. Theory and Design of CNC Systems. Springer Series in Advanced Manufacturing. London: Springer London; 2008. https://doi.org/10.1007/978-1-84800-336-1
- Timar SD, Farouki RT. Time-optimal traversal of curved paths by Cartesian CNC machines under both constant and speed-dependent axis acceleration bounds. Robotics and Computer-Integrated Manufacturing. 2007;23(5):563–79. https://doi.org/10.1016/j.rcim.2006.07.002
- Rong ZX, Xie L, Cong XL, Dao SD. Adaptive parametric interpolation scheme with limited acceleration and jerk values for NC machining. International journal, advanced manufacturing technology. 2006;36(3-4):343–54. https://doi.org/10.1007/s00170-006-0834-6
- Erwinski K, Wawrzak A, Paprocki M. Real-time jerk limited feedrate profiling and interpolation for linear motor multiaxis machines using NURBS toolpaths. IEEE Transactions on Industrial Informatics. 2022; 18(11):7560-7571. https://doi.org/10.1109/TII.2022.3147806
- Erwinski K, Paprocki M, Karasek G. Comparison of NURBS trajectory interpolation algorithms for high-speed motion control systems. 2021 IEEE 19th International Power Electronics and Motion Control Conference (PEMC); 2021. https://doi.org/10.1109/PEMC48073.2021.9432561
- Piegl L, Tiller W. The NURBS book. Berlin: Springer; 1997.
- Zhang J, Song DN, Ma J, Hu G, Sui W. A NURBS interpolator with constant speed at feedrate-sensitive regions under drive and contour-error constraints. International Journal of Machine Tools & Manufacture. 2017;116:1–17. https://doi.org/10.1016/j.ijmachtools.2016.12.007
- Ni H, Zhang C, Chen C, Hu T, Liu Y. A parametric interpolation method based on prediction and iterative compensation. International Journal of Advanced Robotic Systems. 2019;16(1): 172988141982818-172988141982818. https://doi.org/10.1177/1729881419828188
- Zhao H, Zhu L, Ding H. A real-time look-ahead interpolation methodology with curvature-continuous B-spline transition scheme for CNC machining of short line segments. International Journal of Machine Tools and Manufacture. 2013;65:88–98. https://doi.org/10.1016/j.ijmachtools.2012.10.005
- Lu TC, Chen S, Eileen Chih-Ying Yang. Near Time-Optimal S-Curve Velocity Planning for Multiple Line Segments Under Axis Constraints. IEEE Transactions on Industrial Electronics. 2018;65(12):9582–92. https://doi.org/10.1109/TIE.2018.2818669
- Sun Y, Chen M, Jia J, Lee YS, Guo D. Jerk-limited feedrate scheduling and optimization for five-axis machining using new piecewise linear programming approach. Science China Technological sciences/Science China Technological Sciences. 2019;62(7):1067–81. https://doi.org/10.1007/s11431-018-9404-9
- Annoni M, Bardine A, Campanelli S, Foglia P, Prete CA. A real-time configurable NURBS interpolator with bounded acceleration, jerk and chord error. Computer-Aided Design. 2012;44(6):509–21. https://doi.org/10.1016/j.cad.2012.01.009
- Clerc M, Kennedy J. The particle swarm - explosion, stability, and convergence in a multidimensional complex space. IEEE Transactions on Evolutionary Computation. 2002;6(1):58–73. https://doi.org/10.1109/4235.985692
- Eberhart RC, Yuhui Shi, Kennedy JF. Swarm intelligence. Morgan Kaufmann; 2001.
- Birgin EG, Martínez JM. Improving ultimate convergence of an augmented Lagrangian method. Optimization methods & software. 2008;23(2):177–95. https://doi.org/10.1080/10556780701577730
- Paprocki M, Erwinski K, Zivanovic S. CNC machine laboratory stand with H-Bot parallel kinematics using the EtherCAT bus. 43rd JUPITER conference, 39th symposium NC-Robots-FTS : Proceedings, 2022, 3.39-3.46. https://machinery.mas.bg.ac.rs/handle/123456789/4637
- Sedlaczek K, Eberhard P. Using augmented Lagrangian particle swarm optimization for constrained problems in engineering. Using augmented Lagrangian particle swarm optimization for constrained problems in engineering. Structural and Multidisciplinary Optimization. 2006;32(4):277–86. https://doi.org/10.1007/s00158-006-0032-z
- Szczepanski R, Tomasz Tarczewski, Krystian Erwinski, Grzesiak LM. Comparison of Constraint-handling Techniques Used in Artificial Bee Colony Algorithm for Auto-Tuning of State Feedback Speed Controller for PMSM. Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics; 2018.
- Sang Y, Yao C, Yiqian Lv, He G. An improved feedrate scheduling method for NURBS interpolation in five-axis machining. Precision Engineering. 2020;64:70–90. https://doi.org/10.1016/j.precisioneng.2020.03.012
- Nie M, Zou L, Zhu T. Jerk-Continuous Feedrate Optimization Method for NURBS Interpolation. IEEE Access. 2023;11:25664–81. https://doi.org/10.1109/ACCESS.2023.3248081
- Fang Y, Qi J, Hu J, Wang W, Peng Y. An approach for jerk-continuous trajectory generation of robotic manipulators with kinematical constraints. Mechanism and Machine Theory. 2020;153:103957. https://doi.org/10.1016/j.precisioneng.2020.03.012
- Erwinski K, Szczepanski R, Tarczewski T. Nature inspired optimization of jerk limited feedrate profile for NURBS toolpaths in CNC machines. IOP Conference Series: Materials Science and Engineering. 2021;1140(1):012031. https://iopscience.iop.org/article/10.1088/1757-899X/1140/1/012031
- Ren X, Fan J, Pan R. A novel and efficient jerk-smooth feedrate scheduling algorithm for NURBS interpolation. The International Journal of Advanced Manufacturing Technology. 2023;130(3): 1221-1239. https://doi.org/10.1007/s00170-023-12732-z
- Chen M, Sun Y, Xu J, Liu J. Snap-bounded and time-optimal feedrate scheduling for robotic milling of complex surface parts with analytical solution. IEEE Transactions on Industrial Informatics. 2025;21(5):3880-3889. https://doi.org/10.1109/TII.2025.3528566