References
- Directive (EU) 2019/1161 of the European Parliament and of the Council of 20 June 2019 amending Directive 2009/33/EC on the promotion of clean and energy-efficient road transport vehicles. Off J Eur Union. 2019;L 188:116-130
- Karbasian H, Tekkaya AE. A review on hot stamping. J Mater Process Technol. 2010;210(15):2103-18. doi:10.1016/j.jmatpro-tec.2010.07.019
- Jeswiet J, Geiger M, Engel U, Kleiner M, Schikorra M, Duflou J, et al. Metal forming progress since 2000. CIRP J Manuf Sci Technol. 2008;1(1):2-17. doi:10.1016/j.cirpj.2008.06.005
- Huang G, Tihay K, Sriram S, Weber B, Dietsch P, Cornette D. Fracture characterization of AHSS using two different experimental methods. IOP Conf Ser Mater Sci Eng. 2016;418:012080. doi:10.1088/1757-899X/418/1/012080
- Turetta A, Bruschi S, Ghiotti A. Investigation of 22MnB5 formability in hot stamping operations. J Mater Process Technol. 2006;177 (1-3):396-400. doi:10.1016/j.jmatprotec.2006.04.041
- Horvath CD. Advanced steels for lightweight automotive structures. In: Mallick PK, editor. Materials, design and manufacturing for lightweight vehicles. Cambridge: Woodhead Publishing; 2010. p. 35-78. doi:10.1533/9781845697822.1.35
- Feuser P, Schweiker T, Merklein M. Partially hot-formed parts from 22MnB5—process window, material characteristics and component test results. In: Proceedings of the 10th International Conference on Technology of Plasticity; 2011 Sep 25-30; Aachen, Germany. Aachen: ICTP; 2011: 408-13.
- Palmieri ME, Lorusso DV, Tricarico L. Investigation of material properties of tailored press hardening parts using numerical and physical simulation. Procedia Manuf. 2020;50:104-9. doi:10.1016/j.promfg.2020.08.019
- Chen X, Xiao N, Li D, Li G, Sun G. The finite element analysis of austenite decomposition during continuous cooling in 22MnB5 steel. Model Simul Mater Sci Eng. 2014;22(6):065005. doi:10.1088/0965-0393/22/6/065005
- Liu H, Xing Z, Bao J, Song B. Investigation of the hot-stamping process for advanced high-strength steel sheet by numerical simulation. J Mater Eng Perform. 2010;19(3):325-34. doi:10.1007/s11665-009-9510-y
- Kim H, Park JK, Lee MG. Phase transformation-based finite element modeling to predict strength and deformation of press-hardened tubular automotive part. Int J Adv Manuf Technol. 2014;70 (9-12):1787-801. doi:10.1007/s00170-013-5424-9
- Wróbel I. Numerical and experimental analysis of hardening distortions of drawpieces produced in hot stamping process. Metals (Basel). 2021;11(3):457. doi:10.3390/met11030457
- Palmieri ME, Tricarico L. Comparison of flow behaviors at high temperature of two press hardening boron steels with different hardenability. Metals (Basel). 2022;12(11):1935. doi:10.3390/met12111935
- Wróbel I, Danielczyk P. Control system for automated technological process of hot stamping—a case study. Materials (Basel). 2023;16(10):3658. doi:10.3390/ma16103658