References
- Banat D, Mania RJ. Failure assessment of thin-walled FML profiles during buckling and postbuckling response. Compos Part B Eng. 2017;112:278–89.
- Różyło P, Rosłaniec K, Kuciej M. Buckling of Compressed Thin-Walled Composite Structures with Closed Sections. Advances in Science and Technology Research Journal. 2023;17(6):63-72.
- Rozylo P, Rogala M, Pasnik J. Buckling Analysis of Thin-Walled Composite Structures with Rectangular Cross-Sections under Compressive Load. Materials. 2023;16:6835.
- Li ZM, Qiao P. Buckling and postbuckling behavior of shear deformable anisotropic laminated beams with initial geometric imperfections subjected to axial compression. Engineering Structures. 2015;85: 277-292.
- Bazant ZP, Cedolin L. Stability of structures. elastic, inelastic, fracture and damage theories. UK: Oxford University Press. 2010.
- Singer J, Arbocz J, Weller T. Buckling experiments. Experimental methods in buckling of thin-walled structure. Basic concepts, columns, beams, and plates. New York: John Wiley & Sons Inc. 2002.
- Kamarudin MNB, Ali JSM, Aabid A, Ibrahim YE. Buckling Analysis of a Thin-Walled Structure Using Finite Element and Design of Experiments Methods. Aerospace. 2022;9:541.
- Paszkiewicz M, Kubiak T. Selected problems concerning determination of the buckling load of channel section beams and columns. Thin-Walled Struct. 2015;93:112–121.
- Rozylo P, Debski H. Stability and load-carrying capacity of short composite Z-profiles under eccentric compression. Thin-Walled Struct. 2020;157:107019.
- Różyło P, Dębski H. Failure study of compressed thin-walled composite columns with top-hat cross-section. Thin-Walled Structures. 2022;180:109869.
- Li W, Cai H, Li C, Wang K, Fang L. Progressive failure of laminated composites with a hole under compressive loading based on micro-mechanics. Adv. Compos. Mater. 2014;23:477–490.
- Rozylo P, Falkowicz K. Stability and failure analysis of compressed thin-walled composite structures with central cut-out, using three advanced independent damage models. Compos. Struct. 2021;273:114298.
- Kubiak T, Samborski S, Teter A. Experimental investigation of failure process in compressed channel-section GFRP laminate columns assisted with the acoustic emission method. Compos. Struct. 2015;133:921–929.
- Reddy JN, Pandey AK. A first-ply failure analysis of composite laminates. Comput. Struct. 1987;25:371–393.
- Gliszczynski A, Kubiak T. Progressive failure analysis of thin-walled composite columns subjected to uniaxial compression. Compos. Struct. 2017;169:52–61.
- Li Z, Cen S, Wu CJ, Shang Y, Li CF. High-performance geometric non-linear analysis with the unsymmetric 4-node, 8-DOF plane element US-ATFQ4. Int. J. Numer. Meth. Eng. 2018;114:931–954.
- Drozdziel M, Podolak P, Czapski P, Zgorniak P, Jakubczak P. Failure analysis of GFRP columns subjected to axial compression manufactured under various curing-process conditions. Composite Structures. 2021;262:113342.
- Czapski P, Kubiak T. Numerical and experimental investigations of the post-buckling behaviour of square cross-section composite tubes. Composite Structures. 2015;132:1160–1167.
- Rozylo P. Stability and failure of compressed thin-walled composite columns using experimental tests and advanced numerical damage models. Int. J. Numer. Meth. Eng. 2021;122:5076–5099.
- Rozylo P. Limit states of thin-walled composite structures with closed sections under axial compression. Composites Part B. 2024; 287:111813.
- Podolak P, Drozdziel M, Czapski P, Kubiak T, Bienias J. The failure mode variation in post-buckled GFRP columns with different stacking sequences - Experimental damage analysis and numerical prediction. International Journal of Mechanical Sciences. 2021;210:106747.
- Rozylo P, Smagowski W, Pasnik J. Experimental Research in the Aspect of Determining the Mechanical and Strength Properties of the Composite Material Made of Carbon-Epoxy Composite. Advances in Science and Technology Research Journal. 2023;17(2):232–246.
- Wysmulski P. Non-linear analysis of the postbuckling behaviour of eccentrically compressed composite channel-section columns. Composite Structures. 2023;305:116446.
- Samborski S, Rzeczkowski J, Korzec-Strzalka I. Experimental study of delamination process in elastically coupled laminates with the acoustic emission technique. Engineering Structures. 2024;300:117196.
- Rozylo P. Failure analysis of beam composite elements subjected to three-point bending using advanced numerical damage models. Acta Mechanica et Automatica. 2023;17(1):133-144.
- Rozylo P, Debski H. Stability and load carrying capacity of thin-walled composite columns with square cross-section under axial compression. Composite Structures. 2024;329:117795.
- Lapczyk I, Hurtado JA. Progressive damage modeling in fiber-reinforced materials. Compos A Appl Sci Manuf. 2007;38:2333-2341.
- Hashin Z, Rotem A. A Fatigue Failure Criterion for Fiber Reinforced Materials. Journal of Composite Materials. 1973;7(4):448–464.
- Hashin Z. Failure Criteria for Unidirectional Fiber Composites. Journal of Applied Mechanics. 1980;47(2):329-334.
- Benzeggagh ML, Kenane M. Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus. Compos. Sci. Technol. 1996;56:439– 449.
- Turon A, Camanho PP, Costa J, Dávila CG. A damage model for the simulation of delamination in advanced composites under variable-mode loading. Mech. Mater. 2006;38(11):1072–1089.
- Camanho PP, Davila CG, de Moura MF. Numerical simulation of mixed-mode progressive delamination in the composite materials. J. Compos. Mater. 2003;37(16):1415–1438.
- Alhawamdeh M, Alajarmeh O, Aravinthan T, Shelley T, Schubel P, Kemp M, Zeng X. Modelling hollow pultruded FRP profiles under axial compression: Local buckling and progressive failure. Composite Structures. 2021;262:113650.
- Ali HQ, Wagner HNR, Akalın C, Tabrizi IE, Hühne C, Yildiz M. Buckling and fracture analysis of thick and long composite cylinders with cutouts under axial Compression: An experimental and numerical campaign. Composite Structures. 2023;324:117530.