References
- Rajesh S, Ramnath BV, Elanchezhian C, Abhijith M, Riju RD, Kishan KK. Investigation of tensile behavior of Kevlar composite. Mater Today Proc. 2018; 5: 1156-1161
- Suthan R, Jayakumar V, Madhu S. Evaluation of mechanical properties of kevlar fibre epoxy composites: an experimental study. Int. J. Veh. Struct. Syst. 2018; 10: 389-394
- Yeung KH and Rao K. Mechanical properties of Kevlar-49 fibre reinforced thermoplastic composites. Polym Polym Compos. 2012; 20: 411-424
- Agarwal G, Johri N Experimental investigations on mechanical properties and abrasive wear response of glass, kevlar and carbon fabric reinforced composites. Mater Today Proc. 2021; 46: 7966-7972
- AL-Qrimli HF, F. A Mahdi FA, Ismail FB Carbon/epoxy woven composite experimental and numerical simulation to predict tensile performance. Adv Mater Sci. 2015; 4:33-41
- Channabasavaraju S, Shivanand H, Santhosh K. Evaluation of tensile and flexural properties of polymer matrix composites. Int J Mod Eng Res. 2013; 3: 3177-3180
- Prabhuram T, Somurajan V, Prabhakaran S. Hybrid composite materials in Front Automot Mech Eng. 2010; 27-31
- Hashim N, Abdul Majid DL, Zahari R, Yidris N. Tensile properties of woven Carbon/Kevlar reinforced epoxy hybrid composite in Mater Sci Forum; 2017; 20-23
- Al Khaddour S, Ibrahim MB. Experimental Investigation on Tensile Properties of Carbon Fabric-Glass Fabric-Kevlar Fabric-Epoxy Hybrid Composite Laminates. J Compos Adv Mater; 2021; 31
- Priyanka P, Mali HS, Dixit A. Carbon–Kevlar intraply hybrid fabric polymer composites: mechanical performance. Iran Polym J. 2023; 32: 633-645
- Hossain MM, Khan M, Khan R, Siddiquee MAB, Islam T. Carbon/Kev-lar reinforced hybrid composite: impact of matrix variation, in Proceedings of the Int Conf Mech Eng Renew Energy Chittagong. Bangladesh; 2015
- Karthik K, Rajamani D, Manimaran A, Udayaprakash J. Evaluation of tensile properties on Glass/Carbon/Kevlar fiber reinforced hybrid composites, Mater Today Proc 2021; 39:1655-1660
- Lakshmaiya N, Surakasi R, Nadh VS, Srinivas C, Kaliappan S, Ganesan V et al. Tanning wastewater sterilization in the dark and sunlight using Psidium guajava leaf-derived copper oxide nanoparticles an and their characteristics. ACS Omega. 2023; 8: 39680-39689
- Velmurugan G, Chohan JS, Babu K, Paramasivam P, Maranan R. Biosynthesis of SiO2 nanoparticles from bamboo leaves for tanning wastewater treatment and mechanical properties of HMPC-SiO2 nanocomposite, Clean Technol Environ Policy. 2024; 1-20
- Natrayan L, Janardhan G, Nadh VS, Srinivas C, Kaliappan S, Velmurugan G. Eco-friendly zinc oxide nanoparticles from Moringa oleifera leaf extract for photocatalytic and antibacterial applications. Clean Technol Environ Policy. 2024; 1-13
- Velmurugan G, Chohan JS, Paramasivam P, Maranan R, Nagaraj M, Green marvel: Harnessing spinach leaves' power for enhanced photodegradation of various effluents with biogenic ZnO nanoparticles. Desalin Water Treat. 2024; 319: 100566
- Velmurugan G, Chohan JS, Babu K, Nagaraj M, Velumani A. Exploring the efficacy of biosynthesized cupric oxide nanoparticles from Jas-minum Sambac flower extract in wastewater treatment: experimental investigations and potential applications. Desalin Water Treat. 2024; 319: 100570
- Velmurugan G, Chohan JS, Paramasivam P, Maranan R. Green synthesis of silver nanoparticles from southern Eucalyptus globulus: Potent antioxidants and photocatalysts for rhodamine B dye degradation. Desalin Water Treat. 2024; 320: 100687
- Natrayan L, Jayakrishna M, Shanker K, Muthu G, Kaliappan S, Velmurugan G. Green synthesis of silver nanoparticles using lawsonia inermis for enhanced degradation of organic pollutants in wastewater treatment. Glob NEST J. 2024; 26:10 30955
- Ganesan V, Shanmugam V, Alagumalai V, Kaliyamoorthy B, Das O, Misra M. Optimisation of mechanical behaviour of Calotropis gigantea and Prosopis juliflora natural fibre-based hybrid composites by using Taguchi-Grey relational analysis. Compos C Open Access. 2024; 13: 100433
- Jahan I Effect of fabric structure on the mechanical properties of woven fabrics. Adv Res Text Eng. 2017; 2:1018
- ISO B. Textiles–tests for color fastness. Part E04: Colour fastness to perspiration; 2013 (BS EN ISO, 105-E04: 2013)
- International A. Standard test method for tensile properties of polymer matrix composite materials: ASTM Int; 2007
- Kaynak HK, Topalbekiroğlu M. Influence of fabric pattern on the abrasion resistance property of woven fabrics. Fibres Text East Eur. 2008; 16: 54-56
- Radmanovac N, Ćirković N, Šarac T. The importance of the resistance to wear in the choice of fabrics for protective garments. Adv Technol; 2017; 6:81-87
- Özdil N, Kayseri GO, Mengüç GS. Analysis of abrasion characteristics in textiles. Abrasion Resist Mater. 2012; 2:119-146
- ISO E. Textiles–Determination of the Abrasion Resistance of Fabrics by the Martindale Method–Part 2: Determination of Specimen Breakdown; 1998
- Hossain MM, Datta E, Rahman S. A review on different factors of woven fabrics’ strength prediction. Sci Res. 2016; 4: 88-97
- Abdellah MY, Alharthi H. Stress Analysis and Strength Prediction of Carbon Fiber Composite Laminates with Multiple Holes Using Cohesive Zone Models, Polym. 2025;17(1):124
- Mohamed AF, Abdellah MY, Hassan MK, Backar R. Advanced Prediction and Analysis of Delamination Failure in Graphite-Reinforced Epoxy Composites Using VCCT-Based Finite Element Modelling Techniques. Polym. 2025; 17(6): 771
- Sadek MG, Abdellah MY, Abdel-Jaber GT. A review on properties, applications and feasibility study of date palm fiber-reinforced polymer composites. SVU Int J Eng Sci Appl. 2024; 5: 50-61
- Mohammed Y, Hassan MK, Hashem A. Finite element computational approach of fracture toughness in composite compact tension specimen. Int J Mech Mechatron Eng. 2012; 12: 57-61
- Gamal M, Abdellah MY, Alharthi H, Abdel-Jaber G, Ahmed H. Backar, Characteristic Properties of Date-Palm Fibre/Sheep Wool Reinforced Polyester Composites, J Bioresour Bioprod. 2023, 8(4): 430-443
- Fahmy HS, Abdellah MY, Abdel-Jaber G, Hashem AM. Characteristic Properties of Glass Fiber Reinforced Sugarcane Bagasse Medium Density Fiber Board. Cienc Tecnol Mater. 2017; 29: 97–105
- Gelany A, Abdellah MY, Mohamed AF, Khoshaim AB, Protection of limestone Coated with Different Polymeric Materials. Am J Mech Eng. 2017; 5
- Abdellah MY, Hagag AAE, Marzok W, Hashem AF. Tensile and Fracture Properties of Chemically Treatment Date Palm Tree Fibre Reinforced Epoxy. Int J Mech Mechatron Eng IJMME-IJENS. 2019; 4: 40
- Fouad H, Moura AHI, Alshammari BA, Hassan MK, Abdellah MY, Hashem M. Fracture toughness, vibration modal analysis and viscoelastic behavior of Kevlar, glass, and carbon fiber/epoxy composites for dental-post applications. J Mech Behav Biomed Mater. 2020; 101: 103456