References
- Yap YL, Yeong WY. Additive manufacture of fashion and jewellery products: a mini review. Virtual Phys Prototyp. 2014;9(3):195–201.
- Shahrubudin N, Lee TC, Ramlan RJPM. An overview on 3D printing technology: Technological, materials, and applications. Procedia Manuf. 2019;35:1286–96.
- Calì M, Pascoletti G, Gaeta M, Milazzo G, Ambu R. New filaments with natural fillers for FDM 3D printing and their applications in biomedical field. Procedia Manuf. 2020;51:698–703.
- Pu'ad NM, Haq RA, Noh HM, Abdullah HZ, Idris MI, Lee TC. Review on the fabrication of fused deposition modelling (FDM) composite filament for biomedical applications. Mater Today Proc. 2020; 29:228–32.
- Hsueh MH, Lai CJ, Wang SH, Zeng YS, Hsieh CH, Pan CY, et al. Effect of printing parameters on the thermal and mechanical properties of 3D-printed PLA and PETG, using fused deposition modeling. Polymers (Basel). 2021;13(11).
- Gün Gök Z, İnal M, Bozkaya O, Yiğitoğlu M, Vargel İ. Production of 2-hydroxyethyl methacrylate-g-poly(ethylene terephthalate) nanofibers by electrospinning and evaluation of the properties of the obtained nanofibers. J Appl Polym Sci. 2020;137(41).
- Szymczyk-Ziółkowska P, Łabowska MB, Detyna J, Michalak I, Gruber P. A review of fabrication polymer scaffolds for biomedical applications using additive manufacturing techniques. Biocybern Biomed Eng. 2020;40:624–38.
- Ping X, Wang M, Xuewu G. Surface modification of poly(ethylene terephthalate) (PET) film by gamma-ray induced grafting of poly(acrylic acid) and its application in antibacterial hybrid film. Radiat Phys Chem. 2011;80(4):567–72.
- Nicita F, D’Amico C, Filardi V, Spadaro D, Aquilio E, Mancini M, et al. Chemical-Physical Characterization of PET-G-Based Material for Orthodontic Use: Preliminary Evaluation of micro-Raman Analysis. Eur J Dent. 2023.
- Holcomb G, Caldona EB, Cheng X, et al. On the optimized 3D printing and post-processing of PETG materials. MRS Commun. 2022;12:381–7.
- Zaman Q, Zia KM, Zuber M, et al. A comprehensive review on synthesis, characterization, and applications of polydimethylsiloxane and copolymers. Int J Plast Technol. 2019;23:261–82.
- García E, Núñez PJ, Caminero MA, Chacón JM, Kamarthi S. Effects of carbon fibre reinforcement on the geometric properties of PETG-based filament using FFF additive manufacturing. Compos B Eng. 2022;235.
- Kováčová M, Kozakovičová J, Procházka M, Janigová I, Vysopal M, Černičková I, et al. Novel Hybrid PETG Composites for 3D Printing. Appl Sci. 2020;10.
- Vijayasankar KN, Bonthu D, Doddamani M, Pati F. Additive Manufacturing of Short Silk Fiber Reinforced PETG Composites. Mater Today Commun. 2022;33:104772.
- Guessasma S, Belhabib S, Nouri H. Printability and Tensile Performance of 3D Printed Polyethylene Terephthalate Glycol Using Fused Deposition Modelling. Polymers (Basel). 2019;11(7).
- Alarifi IM. PETG/carbon fiber composites with different structures produced by 3D printing. Polym Test. 2023;120:107949.
- Brząkalski D, Sztorch B, Frydrych M, Pakuła D, Dydek K, Kozera R, et al. Limonene Derivative of Spherosilicate as a Polylactide Modifier for Applications in 3D Printing Technology. Molecules. 2020;25(24):5882.
- Dvornic PR. Thermal properties of polysiloxanes. In: Silicon-containing polymers: the science and technology of their synthesis and applications. Dordrecht: Springer Netherlands; 2000. p. 185–212.
- Safandowska M, Rozanski A, Galeski A. Plasticization of Polylactide after Solidification: An Effectiveness and Utilization for Correct Interpretation of Thermal Properties. Polymers (Basel). 2020;12(3):561.
- Casarano R, Matos JDR, Fantini MCDA, Petri DFS. Composites of allyl glycidyl ether modified polyethylene and cellulose. Polymer (Guildf). 2005;46(10):3289–99.
- Przekop RE, Gabriel E, Pakuła D, Sztorch B. Liquid to Fused Deposition Modeling (L-FDM)—A Revolution in Application Chemicals to 3D Printing Technology—Mechanical and Functional Properties. Appl Sci. 2023;13(14):8462.
- Pakuła D, Sztorch B, Romańczuk-Ruszuk E, Marciniec B, Przekop RE. High impact polylactide based on organosilicon nucleation agent. Chin J Polym Sci. 2024;1–11.
- Obermeier B, Frey H. Poly(ethylene glycol-co-allyl glycidyl ether)s: A PEG-based modular synthetic platform for multiple bioconjugation. Bioconjug Chem. 2011;22(3):436–44.