References
- Struzikiewicz G, Słodki B, Zębala W, Franczyk E. Study on Chip Breakability Index During Longitudinal Turning of Cast and DMLS Additively Manufactured AlSi10Mg Aluminum Alloy. Adv Sci Technol Res J. 2022;16(1):28–35.
- Facchini L, Vicente N, Lonardelli I, Magalini E, Robotti P, Molinari A. Metastable Austenite in 17–4 Precipitation‐Hardening Stainless Steel Produced by Selective Laser Melting. Adv Eng Mater. 2010;12(3):184–8.
- San Marchi C, Somerday B. Technical reference for hydrogen compatibility of materials. [Internet]. 2012 Sep [cited 2024 Dec 18] p. SAND2012-7321, 1055634. Report No: SAND2012-7321, 1055634. Available from: https://www.osti.gov/servlets/purl/1055634/
- Murr LE, Martinez E, Hernandez J, Collins S, Amato KN, Gaytan SM, et al. Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting. Journal of Materials Research and Technology. 2012;1(3):167–77.
- Eskandari H, Lashgari HR, Ye L, Eizadjou M, Wang H. Microstructural characterization and mechanical properties of additively manufactured 17–4PH stainless steel. Materials Today Communications. 2022;30:103075.
- ASTM E407-07(2015) Standard Practice for Microetching Metals and Alloys.
- Świetlicki A, Walczak M, Szala M, Turek M, Chocyk D. Effects of ageing heat treatment temperature on the properties of DMLS additive manufactured 17-4PH steel. Bulletin of the Polish Academy of Sciences Technical Sciences [Internet]. 2023 Aug 28 [cited 2023 Sep 19];(7). Available from: https://journals.pan.pl/dlibra/publica-tion/146237/edition/127804/content
- Świetlicki A, Walczak M, Szala M. Effect of shot peening on corrosion resistance of additive manufactured 17-4PH steel. Materials Science-Poland. 2022;40(3):135–51.
- Cao Y, Niu T, Gai P, Chen Y, Pang J, Xu W. Numerical simulation for investigating the impact of shot peening process parameters via surface reconstruction. Int J Adv Manuf Technol. 2023;129(5–6):2721–34.
- Łępicka M, Grądzka-Dahlke M. Effect of Plasma Nitriding Process Conditions on Corrosion Resistance of 440B Martensitic Stainless Steel. Acta Mechanica et Automatica. 2014;8(3):156–9.
- Dillon CP. Corrosion Resistance of Stainless Steels. CRC Press; 1995; 386p.
- Macek W, Branco R, Costa JD, Pereira C. Strain sequence effect on fatigue life and fracture surface topography of 7075-T651 aluminium alloy. Mechanics of Materials. 2021;160:103972.
- Macek W, Branco R, Szala M, Marciniak Z, Ulewicz R, Sczygiol N, et al. Profile and Areal Surface Parameters for Fatigue Fracture Characterisation. Materials. 2020;13(17):3691.
- Otsuka Y, Kondo Y, Duong TT, Mitsuhashi E, Miyashita Y. Synergistic effect of defects and microstructure on fatigue strength of additively manufactured precipitation hardening 17-4PH stainless steel. Engi neering Failure Analysis. 2024;163:108541.
- Liu G, Huang C, Zou B, Liu H, Liu Z, Liu Y, et al. The modification of corrosion resistance of 17-4PH stainless steel by cutting process. Journal of Manufacturing Processes. 2020;49:447–55.
- Yu DT, Wang R, Wu CL, Zhang S, Zhang CH, Chen HT, et al. Iso-Material Manufactured 17-4PH Stainless Steel to Enhance the Nanoindentation, Corrosion, and Cavitation Erosion Behavior. J of Materi Eng and Perform [Internet]. 2024. Available from: https://link.springer.com/10.1007/s11665-024-10134-0
- Singh Y, Singh NK, Ram M. Advanced Manufacturing Processes. CRC Press; 2022: 207p.
- Steponavičiūtė A, Stravinskas K, Selskienė A, Tretjakovas J, Petkus R, Mordas G. Mechnical properties of 17-4PH stainless-steel at various laser sintering process parameters. physics [Internet]. 2024 Jul 2 [cited 2025 Mar 12];64(2). Available from: https://www.lma-leidykla.lt/ojs/index.php/physics/article/view/5350
- Walczak M, Świetlicki A, Szala M, Turek M, Chocyk D. Shot Peening Effect on Sliding Wear in 0.9% NaCl of Additively Manufactured 17-4PH Steel. Materials. 2024;17(6):1383.
- Walczak M, Matijošius J, Özkan D, Pasierbiewicz K. Effect of Shot Peening Parameters on Surface Properties and Corrosion Resistance of 316L Stainless Steel. Adv Sci Technol Res J. 2024;18(3):296–304.
- Sowa R, Kowal A, Roga E, Arabasz S, Dziedzic A, Dul I, et al. Influence of double solution treatment on hardness in 17-4 pH steel. Zas Mat. 2015;56(3):261–8.
- Sun Y, Hebert RJ, Aindow M. Effect of heat treatments on microstructural evolution of additively manufactured and wrought 17-4PH stainless steel. Materials & Design. 2018;156:429–40.
- AlMangour B, Yang JM. Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing. Materials & Design. 2016;110:914–24.
- Świetlicki A, Szala M, Walczak M. Effects of Shot Peening and Cavitation Peening on Properties of Surface Layer of Metallic Materials— A Short Review. Materials. 2022;15(7):2476.
- Walczak M, Szala M. Effect of shot peening on the surface properties, corrosion and wear performance of 17-4PH steel produced by DMLS additive manufacturing. ArchivCivMechEng. 2021;21(4):157.
- Kameyama Y, Komotori J. Effect of micro ploughing during fine particle peening process on the microstructure of metallic materials. Journal of Materials Processing Technology. 2009;209(20):6146–55.
- Walczak M, Szala M, Okuniewski W. Assessment of Corrosion Resistance and Hardness of Shot Peened X5CrNi18-10 Steel. Materials. 2022;15(24):9000.