References
- Różyło P, Dębski H. Stability and load-carrying capacity of short composite Z-profiles under eccentric compression. Thin-Walled Structures. 2020;157:107019.
- Urbaniak M, Świniarski J, Czapski P, Kubiak T. Experimental investigations of thin-walled GFRP beams subjected to pure bending. ThinWalled Structures. 2016;107(1):397-404.
- Droździel M, Podolak P, Czapski P, Zgórniak P, Jakubczak P. Failure analysis of GFRP columns subjected to axial compression manufactured under various curing-process conditions. Composite Structures. 2021;262:113342.
- Baker A, Dutton S, Donald KD. Composite materials for aircraft structures, Reston: American Institiute of Aeronautics and Astronautics. 2004.
- Soutis C. Carbon fibre reinforced plastics in aircraft construction, Materials Science and Engineering. 2005;412 (1-2):171-176.
- Różyło P, Falkowicz K. Stability and failure analysis of compressed thin-walled composite structures with central cut-out, using three advanced independent damage models. Composite Structures 2021;273:114298.
- Banat D, Mania RJ. Failure assessment of thin-walled FML profiles during buckling and postbuckling response. Composites Part B: Engineering. 2017;112:278-289.
- Różyło P. Stability and failure of compressed thin-walled composite columns using experimental tests and advanced numerical damage models. International Journal For Numerical Methods In Engineering. 2021;122(18):5076-5099.
- Li ZM, Qiao P. Buckling and postbuckling behavior of shear deformable anisotropic laminated beams with initial geometric imperfections subjected to axial compression. Engineering Structures. 2015;85:277-292
- Gliszczyński A, Kubiak T. Progressive failure analysis of thin-walled composite columns subjected to uniaxial compression. Composite Structures. 2017;169:52-61.
- Dębski H, Samborski S, Różyło P, Wysmulski P. Stability and load-carrying capacity of thin-walled FRP composite Z-profiles under eccentric compression. Materials. 2020;13(13):2956.
- Różyło P. Failure phenomenon of compressed thin-walled composite columns with top-hat cross-section for three laminate lay-ups. Composite Structures. 2023;304(1):116381.
- Różyło P, Smagowski W, Paśnik J. Experimental Research in the Aspect of Determining the Mechanical and Strength Properties of the Composite Material Made of Carbon-Epoxy Composite. Advances in Science and Technology Research Journal. 2023;17(2):232-246.
- Różyło P, Rogala M, Paśnik J. Load-Carrying Capacity of Thin-Walled Composite Columns with Rectangular Cross-Section under Axial Compression. Materials. 2024;17(7):1615.
- Różyło P, Rosłaniec K, Kuciej M. Buckling of Compressed Thin-Walled Composite Structures with Closed Sections. Advances in Science and Technology Research Journal. 2023;17(6):63-72.
- Podolak P, Droździel M, Czapski P, Kubiak T, Bieniaś J. The failure mode variation in post-buckled GFRP columns with different stacking sequences-Experimental damage analysis and numerical prediction. International Journal of Mechanical Sciences. 2021;210:106747.
- Calzada KA, Kapoor SG, DeVor RE, Samuel J, Srivastava AK. Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer composites. Journal of Manufacturing Processes. 2012;14(2):141-149.
- Anto AD, Mia S, Hasib MA. The influence of number and orientation of ply on tensile properties of hybrid composites. Journal of Physics. 2019;2(2):025002.
- Różyło P. Determined Material Properties within the framework of the National Science Centre project (OPUS) No. 2021/41/B/ST8/00148. https://doi.org/10.5281/zenodo.7606942.
- Wysmulski P. Numerical and Experimental Study of Crack Propagation in the Tensile Composite Plate with the Open Hole. Advances in Science and Technology Research Journal. 2023;17(4):249-261.
- Czapski P, Jakubczak P, Bieniaś J, Urbaniak M, Kubiak T. Influence of autoclaving process on the stability of thin-walled, composite columns with a square cross-section – Experimental and numerical studies. Composite Structures. 2020;250:112594.
- York CB, Almeida SFM. On Extension-Shearing Bending-Twisting coupled laminates. Composite Structures. 2017;164:10-22.
- York CB. Coupled quasi-homogeneous orthotropic laminates. Mechanics of Composite Materials. 2011;47(4):405-426.
- Rzeczkowski J, Paśnik J, Samborski S. Mode III numerical analysis of composite laminates with elastic couplings in split cantilever beam configuration. Composite Structures. 2021;265:113751.
- Różyło P, Dębski H. Failure study of compressed thin-walled composite columns with top-hat cross-section. Thin-Walled Structures. 2022;180:109869.
- Dębski H, Różyło P, Wysmulski P, Falkowicz K, Ferdynus M. Experimental study on the effect of eccentric compressive load on the stability and load-carrying capacity of thin-walled composite profiles. Composites Part B. 2021;226:109346.
- Dębski H, Jonak J. Failure analysis of thin-walled composite channel section columns. Composite Structures. 2018;132:567-574.
- Rosłaniec K, Różyło P. Stability of Thin-Walled Composite Structures with Closed Sections Under Compression. Advances in Science and Technology Research Journal. 2024;18(3):188-199.
- Różyło P. Limit states of thin-walled composite structures with closed sections under axial compression. Composites Part B: Engineering. 2024;287:111813.
- Lapczyk I, Hurtado JA. Progressive damage modeling in fiber-reinforced materials. Composites Part A: Applied Science and Manufacturing. 2007;38(11):2333-2341.
- Hashin Z, Rotem A. A Fatigue Failure Criterion for Fiber Reinforced Materials. Journal of Composite Materials. 1973; 7(4):448–464.
- Hashin Z. Failure Criteria for Unidirectional Fiber Composites. Journal of Applied Mechanics. 1980;47(2):329-334.
- Lemaitre J, Plumtree A. Application of Damage Concepts to Predict Creep-Fatigue Failures. Journal of Enginnering Material and Technology. 1979;101(3):284-292.
- Ribeiro ML, Vandepitte D, Tita V. Damage Model and Progressive Failure Analyses for Filament Wound Composite Laminates. Applied Composite Materials. 2013;20:975-992.
- Kachanov L. Time of the Rupture Process under Creep Conditions, Izv. An SSSR. Otd. Tekh. Nauk. 1958;8:26-31.
- Laws N, Dvorak GJ, Hejazi M, Stiffness changes in unidirectional composites caused by crack systems. Mechanics of Materials. 1983;2(2):127-137.