Identification of Analytical Dependencies of the Operational Characteristics of the Workpiece Clamping Mechanisms with the Rotary Movement of the Input Link

Prydalnyi, Borys; Sulym, Heorhiy

doi:10.2478/ama-2021-0007

Abstract

The research is devoted to the problem of determining the efficiency of the workpiece fixing mechanism operation. Improving characteristics of workpiece fixing is one of the required conditions to increase the cutting modes, which may help to enhance the machining productivity. The study investigates the main characteristics and general features of a new structure of clamping mechanisms with electromechanical actuators for fixation of rotation bodies. The main advantages of using electromechanical clamping actuators with self-braking gear are presented. Two simplified dynamical models for the description of different stages of the clamping process are developed. The calculation scheme was formulated to find out how the mass-geometric parameters of mechanism elements should influence the main characteristics of the clamping mechanisms of this type.

References

1. Alquraan T., Kuznetsov Yu., Tsvyd T. (2016) High-speed clamping Mechanism of the CNC lathe with compensation of centrifugal forces, Procedia engineering, 150, 689-695.10.1016/j.proeng.2016.07.081
Search in Google Scholar Back to article
2. An J., Jiamin C., Wenguo Y. (2019), Measurement of spindle radial error based on target trajectory tracking, Measurement, 146,179-185.10.1016/j.measurement.2019.05.026
Search in Google Scholar Back to article
3. Bediz B., Gozen B.A., Korkmaz E., Ozdoganlar O. B. (2014), Dynamics of ultra-high-speed (UHS) spindles used for micromachining, International Journal of Machine Tools and Manufacture, 87, 27-38.10.1016/j.ijmachtools.2014.07.007
Search in Google Scholar Back to article
4. Budniak Z. (2015), Modelling and numerical analysis of assembly system, Acta mechanica et Automatica, 9(3), 145-150.10.1515/ama-2015-0024
Search in Google Scholar Back to article
5. Chao Xu, Jianfu Z., Pingfa F. (2014), Characteristics of stiffness and contact stress distribution of a spindle-holder taper joint under clamping and centrifugal forces, International Journal of Machine Tools & Manufacture, 82-83, 21-28.10.1016/j.ijmachtools.2014.03.006
Search in Google Scholar Back to article
6. Dogariu C., Bardac D. (2014), Prediction of the structural dynamic behavior of high speed turning machine spindles, Applied Mechanics and Materials, 555, 567-574.10.4028/www.scientific.net/AMM.555.567
Search in Google Scholar Back to article
7. Estrems M., Arizmendi M., Cumbicus W.E., López A. (2015), Measurement of clamping forces in a 3 jaw chuck through an instrumented aluminium ring, Procedia Engineering, 132, 456-463.10.1016/j.proeng.2015.12.519
Search in Google Scholar Back to article
8. Fedorynenko D., Sapon S., Boyko S. (2016), Accuracy of spindle units with hydrostatic bearings, Acta Mechanica et Automatica, 10(2), 117-12410.1515/ama-2016-0019
Search in Google Scholar Back to article
9. Fedorynenko D., Sapon S., Boyko S., Urlina A. (2017), Increasing of energy efficiency of spindles with fluid bearings, Acta Mechanica et Automatica, 11(2), 204-209.10.1515/ama-2017-0031
Search in Google Scholar Back to article
10. Foremny E., Schenck C., Kuhfuß B. (2016), Dynamic Behavior of an Ultra Precision Spindle used in Machining of Optical Components, Procedia CIRP, 46, 452-455.10.1016/j.procir.2016.04.039
Search in Google Scholar Back to article
11. Grama S.N., Mathur A., Badhe A.N. (2018), A model-based cooling strategy for motorized spindle to reduce thermal errors, International Journal of Machine Tools and Manufacture, 132, 3-16.10.1016/j.ijmachtools.2018.04.004
Search in Google Scholar Back to article
12. Grossi N., Scippa A., Montevecchi F. (2016), A novel experimental-numerical approach to modeling machine tool dynamics for chatter stability prediction, Journal of advanced mechanical design systems and manufacturing, 10(2), #15-00547.10.1299/jamdsm.2016jamdsm0019
Search in Google Scholar Back to article
13. Harris P., Linke B., Spence S. (2015), An Energy Analysis of Electric and Pneumatic Ultra-high Speed Machine Tool Spindles, Procedia CIRP, 29, 239-244.10.1016/j.procir.2015.02.046
Search in Google Scholar Back to article
14. Jia Q., Li B., Wei Y., Chen Y., Yuan X. (2016), Axiomatic Design Method for the Hydrostatic Spindle with Multisource Coupled Information, Procedia CIRP, 53, 252-260.10.1016/j.procir.2016.07.013
Search in Google Scholar Back to article
15. Kono D., Mizuno S., Muraki T., Nakaminami M. (2019), A machine tool motorized spindle with hybrid structure of steel and carbon fiber composite, CIRP Annals, 68(1), 389-392.10.1016/j.cirp.2019.04.022
Search in Google Scholar Back to article
16. Li, W.; Zhou, Z. X.; Xiao, H. (2015), Design and evaluation of a high-speed and precision microspindle, International journal of advanced manufacturing technology, 78(5), 997-1004.10.1007/s00170-014-6690-x
Search in Google Scholar Back to article
17. Liu T., Gao W., Zhang D., Tian Y. (2017), Analytical modeling for thermal errors of motorized spindle unit, International Journal of Machine Tools and Manufacture, 112, 53-70.10.1016/j.ijmachtools.2016.09.008
Search in Google Scholar Back to article
18. Longfei Z., Jun Z., Chao Z. (2019), A new method for field dynamic balancing of rigid motorized spindles based on real-time position data of CNC machine tools, International journal of advanced manufacturing technology, 102 (5-8), special edition, 1181-1191.10.1007/s00170-018-2953-2
Search in Google Scholar Back to article
19. Matsubara A., Tsujimoto S., Kono D. (2015), Evaluation of dynamic stiffness of machine tool spindle by non-contact excitation tests, CIRP Annals, 1.V. 64(1), 365-368.10.1016/j.cirp.2015.04.101
Search in Google Scholar Back to article
20. Mori K., Bergmann B., Kono D., Denkena B., Matsubara A. (2019), Energy efficiency improvement of machine tool spindle cooling system with on–off control, CIRP Journal of Manufacturing Science and Technology, 25, 14-21.10.1016/j.cirpj.2019.04.003
Search in Google Scholar Back to article
21. Postel M., Aslan D., Wegener K., Altintas Y. (2019), Monitoring of vibrations and cutting forces with spindle mounted vibration sensors, CIRP Annals, 68(1), 413-416.10.1016/j.cirp.2019.03.019
Search in Google Scholar Back to article
22. Prydalnyi B. (2020), Characteristics of electromechanical clamping mechanism with asynchronous electric motor, International Conference Mechatronic Systems and Materials (MSM), 1-5.10.1109/MSM49833.2020.9202186
Search in Google Scholar Back to article
23. Rabréau C., Ritou M., Le Loch S., Furet B. (2017), Investigation of the Evolution of Modal Behavior of HSM Spindle at High Speed, Procedia CIRP, 58, 405-410.10.1016/j.procir.2017.03.243
Search in Google Scholar Back to article
24. Ritou M., Rabréau C., Le Loch S., Furet B., Dumur D. (2018), Influence of spindle condition on the dynamic behavior, CIRP Annals, 67(1), 419-422.10.1016/j.cirp.2018.03.007
Search in Google Scholar Back to article
25. Shaoke W., Jun H., Fei D. (2019), Modelling and characteristic investigation of spindle-holder assembly under clamping and centrifugal forces, Journal of mechanical science and technology, 33(5), 2397-2405.10.1007/s12206-019-0438-3
Search in Google Scholar Back to article
26. Thorenz B., Westermann H.-H., Kafara M., Nützel M., Steinhilper R. (2018), Evaluation of the influence of different clamping chuck types on energy consumption, tool wear and surface qualities in milling operations, Procedia Manufacturing, 21, 575-582.10.1016/j.promfg.2018.02.158
Search in Google Scholar Back to article
27. Wang H.J. (2013), Study of dynamics characteristics for precision motor spindle system, Advanced materials research, 819, 389-392.10.4028/www.scientific.net/AMR.819.389
Search in Google Scholar Back to article
28. Xu C., Zhang J., Feng P., Yu D., Wu Z. (2014), Characteristics of stiffness and contact stress distribution of a spindle–holder taper joint under clamping and centrifugal forces, International Journal of Machine Tools and Manufacture, 82–83, 21-28.10.1016/j.ijmachtools.2014.03.006
Search in Google Scholar Back to article
29. Yadav M.H., Mohite S.S. (2018), Controlling deformations of thin-walled Al 6061-T6 components by adaptive clamping, Procedia Manufacturing, 20, 509-516.10.1016/j.promfg.2018.02.076
Search in Google Scholar Back to article
30. Yang Y., Zhang W.H., Ma Y.C., Wan M. (2015), Generalized method for the analysis of bending, torsional and axial receptances of tool–holder–spindle assembly, International Journal of Machine Tools and Manufacture, 99, 48-67.10.1016/j.ijmachtools.2015.08.004
Search in Google Scholar Back to article
31. Yuan S.M. (2014), The analysis of static and dynamic characteristics of motorized high-speed spindle based on sensitivity analysis of fem model, Applied mechanics and materials, 43, 376-381.10.4028/www.scientific.net/AMM.43.376
Search in Google Scholar Back to article
32. Zabielski R., Trochimczuk R. (2011), Wybrane problemy projektowania wysokoobrotowych elektrowrzecion frezarskich o niestandardowym łożyskowaniu, Acta Mechanica et Automatica, 5(1), 131-136.
Search in Google Scholar Back to article
33. Zhang S., Yu J., To S., Xiong Z. (2018), A theoretical and experimental study of spindle imbalance induced forced vibration and its effect on surface generation in diamond turning, International Journal of Machine Tools and Manufacture, 133, 61-71.10.1016/j.ijmachtools.2018.06.002
Search in Google Scholar Back to article

Identification of Analytical Dependencies of the Operational Characteristics of the Workpiece Clamping Mechanisms with the Rotary Movement of the Input Link

Abstract

Paradigm

My account